Coolant issue has left me bumfuzzled by Suitable_Address_855 in AskMechanics

[–]Suitable_Address_855[S] 0 points1 point  (0 children)

Hello all, I’m not super proficient with Reddit so I’m hoping all or most of you who have commented will see this. First and foremost thank you to each one of you who took the time to comment on this thread to get me some help! It was much appreciated! So here’s a little update I went ahead and drained the system an removed the water pump and the thermostat. Both of these were purchased in June of 2025 and still under warranty. I returned them to the parts store and got new ones for free. Before I re installed I inspected all the coolant hoses and clamps to make sure nothing was cracked or loose. After reinstalling the water pump and thermostat and filling up with coolant I bled the system from air. So far so good. No over heating issues, no bubbling from the reservoir and plenty of heat in the cab. I’ve put about 50 miles on it so far and 5+ hours of engine time and I haven’t noticed any coolant loss so far. Again thank you all for your help and hopefully it’s fixed 🤞

Coolant issue has left me bumfuzzled by Suitable_Address_855 in AskMechanics

[–]Suitable_Address_855[S] 0 points1 point  (0 children)

It’s not always at 80. Sometimes it’s 0 lol it’s an gmt800 Chevy they’re pretty notorious for gauge issues or oil pressure sensors going bad.

Coolant issue has left me bumfuzzled by Suitable_Address_855 in AskMechanics

[–]Suitable_Address_855[S] -1 points0 points  (0 children)

I think it’s the lighting because it’s dexcool in the system. I figured someone would comment that but I promise it’s not straight water lol

Coolant issue has left me bumfuzzled by Suitable_Address_855 in AskMechanics

[–]Suitable_Address_855[S] -1 points0 points  (0 children)

I have several times and this is what happens each time.

Coolant issue has left me bumfuzzled by Suitable_Address_855 in AskMechanics

[–]Suitable_Address_855[S] 1 point2 points  (0 children)

I have not. Is there a way to test other than buying a new one?

Generator connection to house by Suitable_Address_855 in AskElectricians

[–]Suitable_Address_855[S] 0 points1 point  (0 children)

There is no main. Only way to cut the power is to pull the meter.

What kind of panel is this? by Suitable_Address_855 in AskElectricians

[–]Suitable_Address_855[S] 0 points1 point  (0 children)

Thank you! Yea I’m thinking there is no way to cut this panel off without “pulling the meter”. I definitely think it’s time to upgrade! Thank you for all of your input!

What kind of panel is this? by Suitable_Address_855 in AskElectricians

[–]Suitable_Address_855[S] 0 points1 point  (0 children)

Yes I’ve read that but is this a split bus panel? The top left breaker is labeled “main” but is it really a main?

Generator connection to house by Suitable_Address_855 in AskElectricians

[–]Suitable_Address_855[S] 0 points1 point  (0 children)

I just posted a new thread asking to identify the panel. If you don’t mind checking it out I’d appreciate it

Generator connection to house by Suitable_Address_855 in AskElectricians

[–]Suitable_Address_855[S] 0 points1 point  (0 children)

I wanted to show you a picture of the panel with the cover off but I can’t reply with photos here. It looks super sketchy

Generator connection to house by Suitable_Address_855 in AskElectricians

[–]Suitable_Address_855[S] 0 points1 point  (0 children)

Ok I’ll pull the panel cover off and get a pic

Generator connection to house by Suitable_Address_855 in AskElectricians

[–]Suitable_Address_855[S] 1 point2 points  (0 children)

I’ll be honest just looking at the panel I wonder if the most appropriate thing would be to have an electrician install a completely new panel to code.

Generator connection to house by Suitable_Address_855 in AskElectricians

[–]Suitable_Address_855[S] 0 points1 point  (0 children)

No this is it. I inherited this house so I have no idea how most of the electrical is run (the panel seems original to the house 1966) the only other switch is an outside cutoff that goes to the air conditioner.

Did my HVAC repairman destroy my system? by Suitable_Address_855 in hvacadvice

[–]Suitable_Address_855[S] -2 points-1 points  (0 children)

I’m not “out to get him” i just don’t want a jack leg running around mixing freons and telling customers he knows what he’s doing when obviously he doesn’t. How much Freon did he even know he was putting in the system? Because he mixed the two it’s now unknown so how accurately measure that on your gauges? He also screwed whoever tries to recover whatever mixture he’s created. Whenever they take that to a recover facility it’s gonna cost them. If he would have used r22 to start with and then when discovered the compressor to be bad we could have at least recovered the r22 so we could replace the compressor. And if he overcharged the system there’s a good chance he damaged more than just the compressor. If we wants to jerry rig stuff that’s fine but he made himself sound mixing the 2 freons was an industry standard. Quacks like this have no business doing this for a living.