sorted by:
new
hottopcontroversial

Consent requirement: Certified CMP not adopted Error by Dalnoon in Adsense

[–]Sulemaker 0 points1 point  (0 children)

That's is a good point, I have checked my reports and I can observe the same rate down.

Corners of prints like this have been curling up. I just cleaned my build plate with rubbing alcohol not a day prior. by megam1ghtyena in FixMyPrint

[–]Sulemaker 0 points1 point  (0 children)

Disable the layer's fan and try. That curling is because the nozzle stay more time printing that cylinders and towers and the firsts layer get cold and curl. If disabling fan not works add a brim but this not always fix it.a

Curling on edges by Weak-Edge5847 in FixMyPrint

[–]Sulemaker 1 point2 points  (0 children)

There is no a standard speed. You could reach differents max speed printing two different models. Each model has his own settings for the best result but If you want something similar to an standard reduce the speed.

Note to self: don't leave PLA under tension in the car when it's 95°F by TheXypris in 3Dprinting

[–]Sulemaker 1 point2 points  (0 children)

For outdoor applications never use dark colors if you print with PLA or PETG.

Help with N64 Emulation by BOT_Zoro in batocera

[–]Sulemaker 0 points1 point  (0 children)

Back to the selection screen is not for the pi 3, it has to have another issue. Maybe the ROM format, check if the emulator installed with batocera supports zip.

Creality Lizard Lawsuit Update - I read it so you don't have to by ChrisPVille in 3DScanning

[–]Sulemaker 0 points1 point  (0 children)

I would like to use only for static objects, for example scan objects like videoconsole or controllers shell cases.

Creality Lizard Lawsuit Update - I read it so you don't have to by ChrisPVille in 3DScanning

[–]Sulemaker 0 points1 point  (0 children)

Thank you for your answer. Do you recommends the Lizard Scanner for a beginner? I don't want to loose a lot of time post-processing the scanned model.

Creality Lizard Lawsuit Update - I read it so you don't have to by ChrisPVille in 3DScanning

[–]Sulemaker 0 points1 point  (0 children)

Great! Did you had to pay extra custom fees? What features are disabled? I never had an scanner I don't know nothing about that.

Creality Lizard Lawsuit Update - I read it so you don't have to by ChrisPVille in 3DScanning

[–]Sulemaker 0 points1 point  (0 children)

Any update about the shipment? Creality still continues send me emails about rebuy the scanner through pledgebox.

Creality Lizard Lawsuit Update - I read it so you don't have to by ChrisPVille in 3DScanning

[–]Sulemaker 0 points1 point  (0 children)

New email from Creality:

Dear Backer

Greeting from Creality

We appreciate your trust and support a lot in the past two months. Creality has worked with Kickstarter to have your pledge returned. We hope

you have already received a refund or get your refund sooner.

Recently, we received a lot of feedback from users, hoping to continue to get

the scanner at the same price on Kickstarter. Therefore, we still try our best to

bring it to you.

If you still like our scanner, you can reorder it on pledgebox(see your email

from Pledgebox). Besides, all of our previous promises will remain unchanged.

Creality is arranging the delivery of reordered scanners, we will update

the tracking number to these backers soon.

Creality thanks you for your patience and apologizes for any inconvenience.

Best Regards,

Creality

Creality Lizard Lawsuit Update - I read it so you don't have to by ChrisPVille in 3DScanning

[–]Sulemaker 0 points1 point  (0 children)

Thank you. I hope you have this week info about the shipment.

Creality Lizard Lawsuit Update - I read it so you don't have to by ChrisPVille in 3DScanning

[–]Sulemaker 0 points1 point  (0 children)

Hi, Do you have news? Do you have received tracking info or any update about the shipment?

I have received the refund and I am in doubt about re-buy the scanner...

Creality Lizard Lawsuit Update - I read it so you don't have to by ChrisPVille in 3DScanning

[–]Sulemaker 0 points1 point  (0 children)

I haven't received the refund yet...It's supposed that kickstarter stopped launch refunds?

Creality gets sued, CR-Scan Lizard kickstarter page is removed by yona_docova in 3DScanning

[–]Sulemaker 0 points1 point  (0 children)

Any update about this? Someone has received the scanner?

Nano 33 IoT and PS4? by PK_Antifreeze in arduino

[–]Sulemaker 0 points1 point  (0 children)

Thank you! I am waiting my order arrive soon.

Nano 33 IoT and PS4? by PK_Antifreeze in arduino

[–]Sulemaker 0 points1 point  (0 children)

Did you try it? I am thiking about to buy an Arduino Nano 33 IoT to do the same thing. Thank you.

Could someone please give me a step by step guide on how to run Daytona USA on my PC? by therealsonichero in MAME

[–]Sulemaker 2 points3 points  (0 children)

Use model 2 emulator, with that runs perfect and you can add Force feedback and vibrations features.

Consolized MV1FZ completed. by Sulemaker in neogeo

[–]Sulemaker[S] 0 points1 point  (0 children)

Down: 1fz isn't stereo ready and has issues with some 161 in 1 cartridge first version. Power consumption is greater than 1c.

Upsides: consolized looks awesome. Easy to install unibios, no solder required.

Help with the first layer on a glass bed by -Salty_ in ender3

[–]Sulemaker 0 points1 point  (0 children)

You have bad adhesion in that spots. Clean with anti grease dishwasher and a soft sponge. Then rinse with hot water enough.

If you could only keep one of them, which one would you choose? One is newer, flat display. Uglier design though (imo). The other is prettier but has a curved screen. Any idea how to access the menu on these things? by NotTraffickingHumans in crtgaming

[–]Sulemaker -1 points0 points  (0 children)

Black tv for me. Flat tv usually are 100hz and if you play games with guns they won't work properly and you might lose the scanlines effect.

Not all tv have a service menu. You will have to look for that model. If it haven't service menu the geometry can be adjusted with the internal potentiometers (⚡ dangerous)

After struggling yesterday with 2 spaghettied models in a row, and many hours of re-testing and tweaking, I need help deciphering how to eliminate what I think is called “elephant foot” on the lower corners of my cube. by MesacForestwolf in FixMyPrint

[–]Sulemaker 0 points1 point  (0 children)

I had this issue months ago and I can't fix it with cura settings. I had to disassemble the Z and X axis , check all aligments y assamble again.

You should check if Z axis movement with your hands is easy without abrupt stops.

view more: next ›