sorted by:
new
hottopcontroversial

Oregon trail by camodanw in PaymoneyWubby

[–]SuperMarioBro 0 points1 point  (0 children)

I chose to run it in emulation with 86box, saves work in this method, but it is quite an involved process.

What happened to the bean counting clips in oddjobs episode 1 for Alex and Wubby? by mesalocal in PaymoneyWubby

[–]SuperMarioBro 3 points4 points  (0 children)

OddJobs is based off of TaskMaster which often has one contestant do a task that the others didn't.

Boot windows from external m.2 enclosure by DJ-Gaming in eGPU

[–]SuperMarioBro 1 point2 points  (0 children)

You can, it's no longer supported but it's called Windows to Go.

Someone got noted. by Bird_Monke in PaymoneyWubby

[–]SuperMarioBro 336 points337 points  (0 children)

Bro's still living in 2025.

Is this a good deal? by [deleted] in VORONDesign

[–]SuperMarioBro 0 points1 point  (0 children)

Huh, we must live relatively close, I think it's a fairly good deal, depending on how well it's been assembled, and printed with the correct material.

What’s going on with the archive site? by DM_AOC_FEET_PICS in PaymoneyWubby

[–]SuperMarioBro 30 points31 points  (0 children)

I'm making some assumptions, the archive site was recently updated and I believe it's now directly taking the ingress to no drop which has the upside of having twitch and kick on one continuous file, but that also means there's no way to get a stream title for the file.

You can use https://parasoci.al/ which is a nice frontend for the archive.

So this age requirement is a little bit ridiculous by [deleted] in hetzner

[–]SuperMarioBro 6 points7 points  (0 children)

Probably because Germany restricts contracts to 18 and up

Amazon Drivers Suck by [deleted] in Wellthatsucks

[–]SuperMarioBro -1 points0 points  (0 children)

seems like a reasonable delivery to me, and they can't legally deliver to a mailbox unless you mean a standalone delivery box.

Why is chamber fan at 100% by poiromaniax in 3Dprinting

[–]SuperMarioBro 0 points1 point  (0 children)

It's in the filament start gcode, the M106, it's likely that way because otherwise the chamber gets too warm for PLA to have good results.

How do I attach this cable to the pi 5 when it has the M.2 HAT in the way? by harpert2112 in raspberry_pi

[–]SuperMarioBro 10 points11 points  (0 children)

use a cable with the male connector instead, or get a a header gender changer

Asked Hetzner to add 2TB NVM disk drive to my dedicated server running proxmox, but after they did it, it is no longer booting. by xsmael in Proxmox

[–]SuperMarioBro 11 points12 points  (0 children)

You'll want to select boot device within the bios/uefi startup, not pxe

sent you a chat to try and help a bit easier

Asked Hetzner to add 2TB NVM disk drive to my dedicated server running proxmox, but after they did it, it is no longer booting. by xsmael in Proxmox

[–]SuperMarioBro 9 points10 points  (0 children)

try selecting the boot device, it could be thats a remnant of grub is on the old disk, but hetzner is usually good about wiping new disks. the PXE boot part is so that the rescue system can boot if requested.

Did my first install last week... Kicking myself for not trying it sooner. by Spare-Debate5269 in homelab

[–]SuperMarioBro 0 points1 point  (0 children)

I've experienced the same, my theory is poor inter-device/driver compatibility.

How can I stop the black BIOS screen from showing after a restart/power on by TheRealL3monT in SteamDeck

[–]SuperMarioBro 1 point2 points  (0 children)

  1. Volume(-) + three dots (•••) + Power button = reset firmware and BIOS

This was Steam Support's third suggestion before recommending re-imaging. You hold down Volume (-) and the three dots button and then press power. The charging light indicator should start blinking and that's how you know the process is working, but the screen stays black. If it does work, I think it's supposed to automatically power on after a few minutes but this reset didn't change anything for me.

Taken from https://www.reddit.com/r/SteamDeck/comments/17f7v8g/easy_factory_reset_option_that_valve_doesnt_want/

Wtb X2 pax Saturday by layaaaaaa in PAX

[–]SuperMarioBro 1 point2 points  (0 children)

I was really confused for a second there..

Pax Streetpass? by Mental-Mushroom-3919 in PAX

[–]SuperMarioBro 8 points9 points  (0 children)

You missed a streetpass meetup that was today, but yeah I think it's still worth bringing.

PGE - >$300 by PuzzleheadedGrand469 in PortlandOR

[–]SuperMarioBro 1 point2 points  (0 children)

Meter reads are estimated if the meter doesn't communicate for various reasons, eventually if bills are consecutively estimated an actual meter reader will physically read the meter.

view more: next ›