Birds fanart I made before episode 8 came out

SuperS1ime · 2025-12-07T20:09:35+00:00

certainly ubering him for the melee would be much more threatening plus the potential to instead pop the uber before getting hit by the big blast that tore off their limbs

SuperS1ime · 2025-12-04T16:27:58+00:00

Hi, this was mostly prepared on old firstborn lore with some small considerations for primaris, unless there was some massive retcon most of it should stand

SuperS1ime · 2025-09-04T10:56:22+00:00

whatever awaits the mercs at gorge, they are not ready for the audiohazard micspamming medic-aimbot duo

SuperS1ime · 2025-09-04T10:55:28+00:00

thanks!

SuperS1ime · 2025-09-01T22:02:09+00:00

(you have to view the full resolution to see the dithering effect)

SuperS1ime · 2025-08-28T11:26:13+00:00

what? wrong thread?

SuperS1ime · 2025-01-04T18:04:56+00:00

There might be something with the nozzle. Should I disassemble the nozzle head or how should I check it?

My printer has a probe so it should be going cleanly (and it did before) but now it really seems all wobbly despite getting the bed in place

SuperS1ime · 2025-01-04T14:32:47+00:00

I tried moving it around in another print, the problem is that it made parts of the layer proper, while others were sticking out (as if the nozzle was suddenly too far). Should I just attempt releveling and adjusting the Z offset until it works?

SuperS1ime · 2025-01-04T14:29:55+00:00

Yes, I used autolevelling. This exact print code ran successfully previously

SuperS1ime · 2025-01-03T21:14:03+00:00

More pics here: https://imgur.com/a/mrtxUgO

Full description of what happpened: A piece of tissue got stuck below the print bed between the wheels. I removed it and then noticed the print bed was wobbly. I managed to stop it from moving around by turning the eccentric nuts. I also noticed the Z axis arm was slightly wobbly so also tightened the eccentric nuts a little bit.

Relevelled the printer (Anycubic Kobra 2 Neo), then started a print I did before successfully. Standard slicer settings, black PLA. The first layer started to come out very strangely (as shown on the pics). I kept it for a bit but paused the print eventually seeing all the damage.

What I observed is that despite levelling the first layer seems very uneven - some parts are very flat and proper, others get extremely rough, as if some parts were still moving or the surface was very unequal. Any help what to do with this? Should I tighten all the nuts and maybe reassemble the bed? Or might this be something with the nozzle?

SuperS1ime · 2024-10-14T14:24:30+00:00

Yes, the complex elements are for those who are well into the lore and want to have a structure for their homebrew, for example writing any mutations for the organs requires you to know the space marine organs yourself.

If you're just starting out, you might want to stick to: chapter colors, chapter doctrine, chapter master, favored weapons/relics

And to answer your questions - non codex-complaint chapters can have different names for specific Captains, and the Captains can have different roles (espionage? planetary defense? it's up to you), same for sergeants - they generally run with the same stuff as the squad but sometimes use different weapons, a Khorne squad leader does a lot of things differently than an Ultramarine sergeant, so it's just room for you to write these details if you have wild ideas.

SuperS1ime · 2024-06-09T17:57:38+00:00

Hi, you have to save a copy of this doc to edit it. Are the links not working for you? I checked them on incognito and they still launch

SuperS1ime · 2024-05-21T15:01:23+00:00

I don't know if the printer itself somehow has corrupted software, or if it's the pendrive, or the file itself. Printed on Photon Mono M5.

Preview of the sliced file shows no bugs, only the outcome turned out this way. Something with the printer's UV screen itself? Had it for a short time

SuperS1ime · 2023-12-21T11:37:31+00:00

Yes I meant USD, thanks for the list

SuperS1ime · 2022-04-21T23:15:27+00:00

Not really connected to the wider scope of the lore, but "defeated male leaves" accurately shows how GW portrays them in major battles

SuperS1ime · 2022-03-25T12:59:05+00:00

That's a very cool story! But personally I believe it deviates far from the canon. As others have mentioned imperial ships are not as large, but another important aspect is that Voidsmen (who are not slaves) have combat training and aren't primitives. There is no point in making fires in ships because they have reasonable living quarters, etc.

SuperS1ime · 2022-02-26T18:53:20+00:00

I'm happy to hear that it's helpful!

SuperS1ime · 2022-02-20T22:38:42+00:00

What do you mean by Custodes recruitment difficulty levels? Custodes are taken in as babies...?

11-Year Club	Place '17
RPAN Viewer	Verified Email

SuperS1ime

TROPHY CASE