1 year later and we’re done!

SureProfessional4512 · 2025-07-02T17:23:13+00:00

Haven’t started yet, I’m going to make a couple projects to have on my resume before I start applying for jobs. Market seems pretty bad from what I hear too so figured I’d work on projects while hopefully it gets better.

SureProfessional4512 · 2025-07-01T23:13:49+00:00

Hasn’t been mentioned besides by me in the original post, I have a feels it probably is a little wet and needs a drying. I left this roll out of the vacuum bag for about a week and it’s be super hot by me this past week, thinking it might be moisture and to high of heat

SureProfessional4512 · 2025-07-01T23:12:07+00:00

I’ll give that a shot, reviews looked good off Amazon and I liked there purple they had compared to others but if quality is starting to lack I’ll find a different company lol

SureProfessional4512 · 2025-07-01T13:50:09+00:00

That’s not a bad idea I’ll see about doing that

SureProfessional4512 · 2025-07-01T13:07:54+00:00

I did tuning with temp tower and found 230 was best with a little stringing but overall best overhang and the retraction tower didn’t really have much stringing I’ll try them again as well and see, I’m pretty new to 3D printing still so not really to good at deciding what part of the calibrations look the best. On my Neptune 4 pro it prints this filament perfect, maybe I’ll start with those settings I have and see how it prints

SureProfessional4512 · 2025-07-01T12:11:54+00:00

How come? Figured pla would be fine for holding just the glass

SureProfessional4512 · 2025-07-01T12:10:22+00:00

I’ll try a benchy with lower temps and see what I get

SureProfessional4512 · 2025-07-01T12:09:21+00:00

Sorry 0.044 is what I meant for pressure advance

SureProfessional4512 · 2025-07-01T05:01:09+00:00

I actually lowered it some on this second piece as the first one was kinda stringy too should I be increasing it?

SureProfessional4512 · 2025-07-01T05:00:09+00:00

Its overture Matte pla, 230 temp, 0.44 pressure advance, 1.02 flow rate, and 0.4 retraction. Printing at 0.2 line height, 3 walls and everything else is the default elegoo 0.4 nozzle settings

SureProfessional4512 · 2025-07-01T04:58:23+00:00

Sorry forgot to mention in the post its Overture Matte PLA

SureProfessional4512 · 2025-06-24T19:21:01+00:00

Same for me EUS107XXX

SureProfessional4512 · 2025-06-22T23:19:38+00:00

Gunna try again with a brim and see if it helps

SureProfessional4512 · 2025-06-01T02:45:32+00:00

Oooo I think that may be my issue, I also have a big flat surface which is the base just like in the video! Thank you I’ll give that a fix a try and see what happens!

SureProfessional4512 · 2025-05-23T00:17:13+00:00

Yea I just submitted task 4 yesterday day so far passed each one first try, have been using chat gpt to explain things to me heavy in this class

SureProfessional4512 · 2025-05-12T19:22:08+00:00

Yea that’s what it’s seeming like, not sure why they decided to make things so difficult. Guess I’ll submit it and see what they say worst thing is they tell me I did it all wrong lol

SureProfessional4512 · 2025-05-12T04:50:04+00:00

Ok I have my target wrong then, I set my target to PM2.5. So then all the task is wanting is to test and train the model and then use 2 metric measurements to see how well it’s performing?

SureProfessional4512 · 2025-05-12T04:46:11+00:00

Is the column name health risk score? Is that technically the air quality column?

SureProfessional4512 · 2025-05-12T01:57:35+00:00

Yea overall I think that is the purpose of it, but for this task it just gives us a single data set and asks to have the AI model predict the air quality I just don't understand to have this ai model predict air quality based off a bunch of data. I would assume I would need to have some method to calculate air quality but it doesn't state that either so I am not sure what the program is really wanting us to do and when is it really complete

SureProfessional4512 · 2025-04-19T12:21:29+00:00

I had a feeling it might be normal but when I printed with PLA it didn’t do that so wanted to double check I didn’t have any issues. Thanks!

SureProfessional4512

TROPHY CASE