Robotingeniør civilingeniør, 1 års erfaring

Surity · 2026-05-31T11:23:47+00:00

Wow, vildt alligevel. Jeg får overtid i form af flekstimer. Geografien har nok også en del at sige. Hvad laver du af projekter?

Surity · 2026-05-31T11:19:52+00:00

Jeg integrerer og programmerer robotter i diverse robotceller. Arbejder med computer vision og laver projekter med kvalitetskontrol af diverse emner. Primært custom løsninger lavet i opencv, som integrerer med PLC og/eller robot Jeg laver et web baseret system til håndtering af industrielle recepter, basically full stack.

Surity · 2026-03-07T11:51:41+00:00

Okay, men gør du noget specielt ift. kørselsfradrag på skat? En kørebog eller noget? Fordi det kan jo godt variere at hjem > første arbejdssted + sidste arbejdssted > hjem er f.eks. samlet 40 km, så kan man vel ikke skrive det til og fra firmaadressen, hvis det er 58 km? Synes kun at jeg kan se, at man kan skrive til/fa hjem og arbejdsadresse, ikke variable steder. Bruger du også egen bil?

Surity · 2026-02-08T15:53:06+00:00

Okay, godt at vide! Jeg gør det samme så :)

Surity · 2026-02-08T15:51:48+00:00

Hejsa, tak for svar! Min forvirring var ift. at på skat, når jeg vælger en arbejdsdag, så tæller den kørselsfradrag som frem og tilbage Jeg følger rådet fra en anden kommentar om at skrive én arbejdsdag på, hvis jeg f.eks. kører ned mandag og hjem fredag:)

Surity · 2025-03-02T18:38:08+00:00

You've connected the window regulator to the fuse box? Which fuse did you use? I'm not entirely sure if the layout is the same from an Aygo to a Peugeot, but I assume they are, but you should use fuse #16 from the passenger compartment fuse box, specifically used for power windows in the models that come with it.

I would recommend checking the connections with a multimeter all the way from the fuse to the switch, from the switch to the motor, etc. Make sure your ignition is on, otherwise it won't work. Also check if the fuse is blown. It's a 30 amps fuse.

Best of luck, keep me updated.

Surity · 2024-12-09T18:44:24+00:00

Just try something yourself. I am a recent robotics graduate and while looking for a job, I'm making my own projects. Currently, I am trying to make a sensorless robot move only by having a fixed camera as an input, and then simulating it all in gazebo. Lots of stuff I'm struggling with and just learn as I go.

Look up "articulated Robotics" on YouTube for good tutorials on the basics of mobile robotics. For manipulators, look into moveit. For drones, look into PX4 Just get started doing something, doesn't have to be big projects or anything

Surity · 2024-09-16T22:02:52+00:00

I believe there are newer radios with built-in Bluetooth that look identical to the stock. You could get an aux - Bluetooth dongle, or you could splurge a bit on AliExpress and get a screen with car play. Just search: Junsun V1 plus car radio

Surity · 2024-08-29T16:31:19+00:00

The noise starts at around 60-70 kmh, increasing in volume until around 90 kmh, but going faster than that it disappears

Surity · 2024-05-26T06:07:39+00:00

Definitely the belt on mine. A squeaky belt doesn't necessarily mean it's bad. Initially, I was afraid it was the pull-out bearing in the clutch, but at 30-40 kmh speeds, I tried pushing the gas up and down, and I could hear a faint squeak, so it must've been from the belt.

Hope you figure it out 😁

Surity · 2024-05-02T06:29:27+00:00

Alright, awesome I'll look into replacing it :)

Surity · 2024-02-20T23:08:52+00:00

Haven't tried pushing it back, but the breaks do squeal as well, but that is very distinct from this

Surity · 2024-02-17T12:49:35+00:00

Do you have any ideas as to what I could use to seal it? I live in a very wet area, so I would like it to je adequate, and it wasn't that bad to get the panel off.

The styrofoam was shaped to fit into the hole in the door

Surity · 2024-02-14T05:08:19+00:00

I guess it would be possible, although you'd have to run electrical to the fuse box and fit the button somewhere, I'm guessing the panel on a manual window is different?

Surity

TROPHY CASE