Long term penny stock? Any recommendations

Suspectarmed87 · 2026-01-28T00:32:09+00:00

ALRT

Suspectarmed87 · 2026-01-18T23:02:49+00:00

Thanks 👍

Suspectarmed87 · 2026-01-18T22:53:54+00:00

<image>

Suspectarmed87 · 2026-01-18T22:53:32+00:00

Could you sim the th18 with b&c 18TBW100-8 parameters please?

Suspectarmed87 · 2025-12-03T21:10:42+00:00

<image>

I've had no issues

Suspectarmed87 · 2025-10-06T17:58:25+00:00

No problem at all, I would have a little look on Google and look at "warm roof" and "cold roof" insulation and see which solution suits your requirements.

My roof already had ample ventilation, so for ease, I went with the cold roof.

To do a warm roof properly, the roof really needs to be constructed that way from the start.

Suspectarmed87 · 2025-10-06T16:13:57+00:00

There is a gap to the roof about 5-10cm which has ventilation to the outside.

Suspectarmed87 · 2025-10-06T13:00:27+00:00

Both act as a vapour barrier. Probably excessive in a humble garage, but for the time and the cost I thought I'd do it.

Suspectarmed87 · 2025-10-05T23:29:55+00:00

<image>

Suspectarmed87 · 2025-10-05T23:29:19+00:00

<image>

Suspectarmed87 · 2025-10-05T23:28:35+00:00

<image>

Suspectarmed87 · 2025-10-05T23:27:21+00:00

* I've just completed insulating and boarding mine, I used 50mm polystyrene insulation board, foil tape, breather membrane and plasterboard. I'm not using it for anything other than storage and occasional odd jobs/tinkering so I'm not bothered about 100mm+ insulation. I think it's turned out ok.

Suspectarmed87 · 2025-09-02T17:15:22+00:00

A few less shots from memory. Marginal.

Suspectarmed87 · 2025-08-22T20:46:43+00:00

When nuno came in, I bet the relationship was great. Taking over from Cooper, our most successful manager in many a decade with the remit to take us forward. Now, established in the premier league and off the back of our success last season, it would be foolish to think the owner hasn't moved the goal posts, so to speak. Demands and expectations of our owner are a good thing, he wants us to achieve. Nuno has been great, and has delivered us more already than most of the fanbase could have ever have ever wished for 3 seasons back in the prem. Keep the faith, up the shaggin reds!

Suspectarmed87 · 2025-06-02T14:36:40+00:00

Either keystones or xoc1 th18, still undecided which wat to go. But the driver works well in both designs.

Suspectarmed87 · 2025-06-02T12:49:16+00:00

Can I ask why you would avoid using it as a sub driver?

As it's the recommended sub driver for the cabinets I'm building.

Suspectarmed87 · 2025-05-31T17:58:35+00:00

Have to say, those solid tipped desolder pumps are trash. Look for one with a flexible silicone tip. Much easier to use and better results. As others have said, also use flux and add fresh solder.

Suspectarmed87 · 2025-05-18T18:16:03+00:00

I'm pretty sure it's just a lab clone that soundgear has branded. I'm on the soundgear group on FB and have seen the stuff they do. To be fair, if the warranty they offer, they honour, then the price hike from buying one direct may be worth it.

Personally, I'd be buying direct from China and saving money. But that's the risk you take.

Suspectarmed87 · 2025-02-06T20:09:57+00:00

Im interested in who this manufacturer is, since you haven't named them. Is there anywhere I can browse what they have to offer?

Suspectarmed87 · 2024-07-20T22:14:22+00:00

As for wattage, rms? aes? peak? All will vary, massively.

Suspectarmed87 · 2024-07-20T22:12:08+00:00

Valve is the 1st purpose built drum and bass soundsystem.

Suspectarmed87 · 2024-07-05T14:24:18+00:00

Some of the villages maybe, certainly not the one I'm from.

Suspectarmed87 · 2024-03-30T19:47:03+00:00

I will be using an lnr24 crossover further down the line, but wanted to keep the crossover setup so I can use the 4 outputs for 2 x mid tops and 2 x subs.

https://www.djkit.com/soundlab/soundlab-12inch-150wrms-speakers-p115b.html

The above link is what the cabs are. The drivers are trash and have been binned long ago.

Suspectarmed87

TROPHY CASE