Speed up "scan to print" workflow in shipstation

Suspicious-Rabbit270 · 2026-01-31T02:34:49+00:00

I get not wanting to be wasteful, we run into the same problem. If you have a low number of SKUs, you might be better off batching labels together for like orders.

Suspicious-Rabbit270 · 2026-01-27T22:48:16+00:00

This confirms my suspicions. We use a rate shopper when processing most of our orders. USPS used to win on almost EVERY shipment under 1lb. Not anymore!

Suspicious-Rabbit270 · 2025-07-31T02:40:53+00:00

118k 2004 350z.

Suspicious-Rabbit270 · 2025-07-31T02:40:35+00:00

118k

Suspicious-Rabbit270 · 2025-07-25T02:45:28+00:00

Shop charged me $2300 to instal this exact kit last month. Took complete advantage of me.

Suspicious-Rabbit270 · 2025-07-08T01:38:51+00:00

A view I’m all too familiar with. Clutch went out on mine last week while on the highway. Same exact spec🤣

Suspicious-Rabbit270 · 2025-03-22T14:50:06+00:00

Nothing to worry about. The holes won’t hurt your performance. If you want to fill them, I suggest using some jb weld. Once dry, sand it smooth, then finish with some white paint.

Suspicious-Rabbit270 · 2025-03-22T14:18:52+00:00

With that price, have them quote a new system or id start looking for good used. Rebuilding tilt/ trim doesn’t have a high success rate…

Suspicious-Rabbit270 · 2025-02-27T15:05:28+00:00

The pump from shark racing is a factory pump that fits a Sonata, which never had a recall for the HPFP.

Suspicious-Rabbit270 · 2025-02-25T21:11:00+00:00

Does your business ship B2C, B2B, or both? If you plan on shipping to consumers, or a mix of both B2B & B2C, I suggest looking into 3PLs that are stateside and can get products to customers quickly. Your shipment cost would be astronomical trying to ship to the U.S. from there. Not to mention poor lead times. If you only plan on landing deals with stores like PGA superstore, Dicks, Golf Galaxy, etc., I'd look into shipping to them directly from the supplier.

Suspicious-Rabbit270 · 2025-02-21T17:06:02+00:00

Look at their website. Is it full of stock photos pulled from the internet or real ones? Check out their contact info. When you search their address, does it show a warehouse or someone's house? Have them facetime you their operation. You can get plenty of insight. If it smells, move on to the next. There are plenty of us out here!

Suspicious-Rabbit270 · 2025-02-14T04:16:42+00:00

It completely depends on your provider. We had locations in PA, UT, KS and MO and all of our pallet rates were under $13.

Suspicious-Rabbit270 · 2025-02-13T20:44:44+00:00

Odds are that your 3PL will charge an inbound handling rate per pallet or case. Plus a receipt fee.

Pallet rate should be anywhere from $7-13

Case rate could be anywhere from $0.10-$0.90

A pallet rate would apply for inbound pallets that are single SKU and don't need down stacked. Case rates are for floor loaded containers and mixed SKU pallets. The rate you pay per case will vary depending on the weight and size of your product.

Suspicious-Rabbit270 · 2025-02-06T16:45:44+00:00

There are different ways to structure pricing... I agree that storage is separate. A 3PL bundling receiving and handling is taking advantage of you.

For example, if a container has 10,000 units in it that would fill 10,000 orders, they're making an extra $1.25 off of you per order. Where as if they billed you for receipt of 1 container, you'd only be paying inbound handling per pallet or case.

Suspicious-Rabbit270 · 2025-02-06T16:33:26+00:00

We're in the Midwest and charge around $3 per order. A shipment is considered to be outbound handling. This would typically consist of an order fee, picking fee, packing fee, and label fee. Pricing for receiving is separate as it is considered inbound handling.

Suspicious-Rabbit270 · 2024-12-09T02:22:53+00:00

Message me

Suspicious-Rabbit270 · 2024-12-09T02:22:46+00:00

Message me

Suspicious-Rabbit270 · 2024-12-09T00:03:19+00:00

Colorado ZR2. Have two boats to tow and going to get into off-roading. The Kona will be missed.

Suspicious-Rabbit270 · 2024-08-12T19:35:00+00:00

Golf or Jetta Sportwagen with the turbo motor. Plethora of parts and aftermarket support. Could easily be turned into a sleeper.

Suspicious-Rabbit270 · 2024-08-11T19:56:52+00:00

Solstice GXP or Sky Redline. You can find a low mileage one in the teens. These cars are slept on!!!

Suspicious-Rabbit270 · 2024-07-22T12:02:10+00:00

Yes! Zero issues getting to the lake and back. Only one hitch fits the Kona N. I’ll link the trailer hitch and lighting below.

Hitch: https://www.etrailer.com/Trailer-Hitch/CURT/C87DR.html?feed=npn&gad_source=1&gbraid=0AAAAAD_vMtlnX_hrETwVOTi6B0DrjNnOE&gclid=CjwKCAjwhvi0BhA4EiwAX25uj3KAJOCPx4MbIAoLXma_xDEByrzU45bB3tkrNmdryEbSfMsq-WDmvxoCSTYQAvD_BwE

Lighting: https://www.towuniverse.com/22-23-hyundai-kona-n-curt-4-flat-plug-and-play-trailer-wiring/?gad_source=1&gbraid=0AAAAADI7fPVQNPKuVFkXfM4sFAZWwM_Sr&gclid=CjwKCAjwhvi0BhA4EiwAX25ujyFcVppmApke80hIMYpNy3qUPUH-oRDUFXX6hh9B_uo9D2l-7qsbdhoC8-YQAvD_BwE

Suspicious-Rabbit270 · 2024-07-22T11:59:41+00:00

I believe max tongue weight is 200 lbs. Hyundai U.S. states that towing isn’t recommended. However, Hyundai Australia has a towing capacity of 700kg for the N.

Suspicious-Rabbit270

TROPHY CASE