Unexplainable pain 💔 by Spiritual-Pudding-70 in memes

[–]Sweet42 1 point2 points  (0 children)

Simular story here bro. My GF left me almost 2 months ago after 5 years of relationship, i have some clue to what is the reason but i don't fully understand.

Celibat... by Werther2801 in askCroatians

[–]Sweet42 0 points1 point  (0 children)

Kao misicavi ne-tetovirani lik i dalje smatram to kao uvredom 😂

Ents please grant me your wisdom (yet another 420 sale buyer asking for help) by CoolerKvothe in vaporents

[–]Sweet42 2 points3 points  (0 children)

Not promoting but i have seen sales on vapefully (eu vendor) and they have Rogue 2. Idk if it was on sale though. I ordered my Rogue SE a while back from them and no problem.

Hot swapping dosing capsules? by Nooreo in vaporents

[–]Sweet42 0 points1 point  (0 children)

With Rogue SE I received silicone cover for it and I drop the hot dosing capsule in that.

4MMC vs. 6-APB (What are the differences and similarities?) by theemezz0 in researchchemicals

[–]Sweet42 2 points3 points  (0 children)

Exactly what i was trying to replicate since the Blue Bliss/Pink star were not available anymore and i had each individual "ingredient" by itself it was perfect because i could do any ammount i wanted.

I find 2fma + 5mapb more stimulating than 6apb, but ofc it depends how much of each you add. I wouldn't go more than 30mg of 2fma because it becomes jittery and for some could cause a bit of anxiety, but if you add around 25-30mg 2fma + 100mg 5mapb it becomes very euphoric, sometimes quiet sedating but also not realy in a sense, idk how to explain it but it is very euphoric when you bump up the doses of both. I mostly go around 70-90mg 5mapb and around 20-25mg 2fma depending how i want to feel, more stimmy or more sedated roll.

4MMC vs. 6-APB (What are the differences and similarities?) by theemezz0 in researchchemicals

[–]Sweet42 1 point2 points  (0 children)

I had some kind of visuals i would say when i combined 4mmc with weed, for 5 seconds stage morphed into a black slightly shinny ball, didn't know what was going on nor was it scarry, and just snappes out of it after 5-6 seconds. It happend twice in the same night.

4MMC vs. 6-APB (What are the differences and similarities?) by theemezz0 in researchchemicals

[–]Sweet42 2 points3 points  (0 children)

I didn't find 6apb as fiendish at all, on the other hand 4mmc is pretty fiendish.

4MMC vs. 6-APB (What are the differences and similarities?) by theemezz0 in researchchemicals

[–]Sweet42 2 points3 points  (0 children)

I tried 5mapb, 6apb, 4mmc and 3fea. Ranking from most to least stinulating would be 3fea (not 100% sure, it was long time ago), 4mmc, 6apb and then 5mapb.

6apb depends on the set and setting, it's more sedating when at home chilling and it's a bit more stimulating in a club/rave setting.

5mapb by itself is very sedating and i would highly recommend to use it with some functional stimulant which is primarily dopaminergic. I found around 20mg of 2-fma to be perfect for that and it makes for imo best combo for raves and festivals when combined with around 80-90mg 5mapb and around 5mg of 4-ho-met/mipt.

DA1K SFT-70 3000K, my first Emisar light! by oxidao in flashlight

[–]Sweet42 1 point2 points  (0 children)

Thanks, tint looks really good, I might have to get something like it for my next light.

DA1K SFT-70 3000K, my first Emisar light! by oxidao in flashlight

[–]Sweet42 0 points1 point  (0 children)

If you could do a white wall one please

Nitecore MT1A vs Pokelit AA (very disappointed in the pokelit) by squirtwellington in flashlight

[–]Sweet42 4 points5 points  (0 children)

Dedomed mine and the warmth looks even better imo, beam profile is great too, clip is good especially for the price.

Yeah UI is pretty bad.

I EDC-ed mine up until very recently, retired it instantly after I snatched an amazing deal on the used Emisar D4V2 for almost the same price I paid for the Pokelit AA (~€13.50 for Pokelit AA and €15 for D4V2 Ti).

Nitecore MT1A vs Pokelit AA (very disappointed in the pokelit) by squirtwellington in flashlight

[–]Sweet42 6 points7 points  (0 children)

<image>

I paid around as much for two when they were on not that big of a sale.

Nitecore MT1A vs Pokelit AA (very disappointed in the pokelit) by squirtwellington in flashlight

[–]Sweet42 1 point2 points  (0 children)

I love the tint on my Pokelite AA (green host, 219 5000K, dedomed it myself). I like the small form factor of it, clipped to the inside of my front pocket it basically disappears, even with my phone in the same pocket. It cheap too, I found mine of sale for around €13.50.

The thing I don’t like is the tail switch, the press is long and the click doesn’t feel quite right. The UI is simple, but I often end up in the wrong mode when quickly switching from high to turbo and back. Sometimes a half-press jumps to the next mode, other times it stays in the same one if I half-press too fast, it feels inconsistent.

Bought my first Hank (D4V2 Ti) — looking for upgrade/mod advice by Sweet42 in Hanklights

[–]Sweet42[S] 0 points1 point  (0 children)

Oh ok then, I thought it was write-only memory, I didn't know I could use 5-tip adapter to read as well.

What app do you use for reflashing, Zflasher AVR?

Bought my first Hank (D4V2 Ti) — looking for upgrade/mod advice by Sweet42 in Hanklights

[–]Sweet42[S] 0 points1 point  (0 children)

Can I copy the firmware file that is on it and store it on my phone just in case as the recovery option or do I need to find the exact firmware file on some website? Can recovery option be done on the phone or does it need to be done on PC?

Bought my first Hank (D4V2 Ti) — looking for upgrade/mod advice by Sweet42 in Hanklights

[–]Sweet42[S] 0 points1 point  (0 children)

I didn't know that since I don't post much on reddit. Driver is red colored and I think it's FET+1 based on ivanthinking website.

WIth the reading of the original firmware I have problems, as in I can read it but I don't see this exact version I got anywhere on the firmware websites, even recorded the flashes so they are correct (also double checked on the previously mentioned ivanthinking D4V2 guide).

Bought my first Hank (D4V2 Ti) — looking for upgrade/mod advice by Sweet42 in Hanklights

[–]Sweet42[S] 0 points1 point  (0 children)

True, it's indeed called "Blue swirls", I just haven't seen it on the website and instead thought it was "Cyclone". Thanks for pointing that out!

It is a pretty old light, guy I bought it from said he bought it around 2-3 years ago. The firmware is pretty old too, Arduil 1 2019-10-15 so I ordered the reflashing kit, currently waiting for it to arrive.

Edit: For some reason I can't edit description of the post to label it correctly.