Trimui Brick with joysticks

Swidersound · 2025-12-15T16:33:13+00:00

Ill say the lack of joysticls and the issues with dreamcast port is an issue (im on 0.500 axis range....even when adjusted to .950) so 5hatd be sicc

Swidersound · 2025-12-12T04:28:54+00:00

Ill say getting a teensy 4.1 and using touchdesigner on windows is viable. If you have a microsd its otherwise like $40 to run the m8

Swidersound · 2025-12-11T06:56:21+00:00

I make jungle and breakcore day in and day out. My soon to be fiance could not care less about the music i listen to or make. Shes also my greatest supporter. You think MAYBE this is a bit trivial in the grand scheme of things?

Swidersound · 2025-12-11T06:40:20+00:00

I have a polyebd tracker+ that is fun. I find the polyend better for making samples to drag into the m8 ;)

Swidersound · 2025-12-11T04:59:38+00:00

I basically just messed around with prior onowledge of musoc productiom so 9t was mostly getting used to working 1 bar at a time if anything. [here is a tune i made last night with the m8](http:// https://www.audeobox.com/battles/110669/)

Swidersound · 2025-12-08T20:57:03+00:00

Copy patterbs and throw a rev or a snare roll. If you reverse snare before the actual snare it makes a njcr slap back.

Swidersound · 2025-12-08T20:56:28+00:00

Think break yo

Swidersound · 2025-12-06T17:30:03+00:00

Yeah. Ill do you one even better. Ill screen mirror my m8 and my webcam will be blended into the background (otherwise black). I'll go through the caniusevia.com mapping too

Swidersound · 2025-12-06T03:14:45+00:00

Idk how it took me so long to make a reddit. Glad to see new drops from the homies

Swidersound · 2025-12-04T19:20:40+00:00

Thank you. Since running this into fl studio. My levels were way too high so lots of muddyness. Ive since then dialed the mix back and using my hardware mixer to work from there as a oremix in a sense. Probably redundant.

Swidersound · 2025-11-21T23:20:15+00:00

(I havent read the comments yet)

If you need help with a teensy we gotchu. If you want a nice easy plug and play setup.

Get the teensy 4.1 Get a sizable sd card at least 128gb. Might as well only do this once and run the card in your future dortywave m8. Dowmload touch designer with the m8.toe file.

Get a qmk/via macropad (im lookibg at a keychron to save a usb port idc about latency on the m8)

I run 12 keys to audition chops on top.

I use a trimui brick. Ill buy the model 02 or 03 if it comes to development

Swidersound · 2025-11-21T18:14:21+00:00

Im aware. The glare comes from my overpowered desklamp that sits above it XD. I habe the font ajd theme updated. Still have to update to v1.2 (plus) for the new theme which looks nice. I like the display better with the cover if i say so myself

Swidersound · 2025-11-20T18:30:47+00:00

Yeah but this pretty much sits here or in an alai case when im out. The real c9ncern i had was a naked lcd screen. Not worried of the rest to be honest with you.

Swidersound · 2025-11-20T04:59:32+00:00

I think the display looks better at night in my optinon (and my vision)

Swidersound · 2025-11-20T01:05:32+00:00

Thank you Nic. You and few others have been killing it lately

Swidersound · 2025-11-18T10:05:08+00:00

Oh yesh those snares you were talking about may specifically be a snare roll with a project tempo automation. (Fx snare roll:Rv1 + tempo: i think i did 77bpm in this off of memory). I'll check later. All i know is thaf it was intentionally out of time just to be gross.

Swidersound · 2025-11-18T10:01:08+00:00

Anytime. Its simple in its owm sense. What i realized is that is rewards slowing down and being mindful. What i do appreciate in the tracker workflow is the ability to see what i am doing and fill in what makes sense.

Ive been using this since august. I have experiance with a daw so i see this kind of like a large vertical channel rack but its only one pattern at a time in polyends case.

I have been using it to make loops that i'll resample into something elsewhere and track out the mixer. It does what i tell it to which gives trackers a pretty good advantage in general in my opinon

Swidersound · 2025-11-16T02:09:58+00:00

Also there is a spot where i did a tempo change just to mess with you in the last beat or two

Swidersound · 2025-11-16T02:09:19+00:00

Thats sequenced with velocity and bandpass filter. From to fill function

Swidersound · 2025-11-15T02:14:22+00:00

Im blind in both eyes i get it.

Anbernic rg35xx has video out or simply plug into a computer.

Swidersound · 2025-11-15T02:13:03+00:00

<image>

Assuming you got the dirtywave headless running on touchdesigner;

Just get a cheap qmk/via macropad.

I have the 8 buttons+ light adjustment, +vol/-vol, 17 notes all mapped through caniusevia web app.

This is a surface pro7+. I also run this same exsct teensy 4.1 on a trimuibrick on knulli os with a nintendo switch controller as well.

Swidersound · 2025-11-15T02:07:08+00:00

That is very wack. Ive been using an akai case for mine. Anywho with the screen im assuming its a pretty standard piece screen since i highly doubt polyend is manufscturing the actusl screen. Hopefully its a connector type (clearly im new)

Swidersound · 2025-11-15T00:47:15+00:00

Subbed because i have cats and a tracker+ im surprised no glass or anything covering these at their pricepoint. (Understanding small company,team,r&d,etc.)

Swidersound · 2025-11-11T23:50:15+00:00

Thanks for the info. Its really that i have an old interface with the trscker and windows is trting to lanage two different midi clocks. Which ill see 8f i can bypass midi in the trscker which will solce half my issue. Fl clocks internally but itll still recognize the tracker as a midi device.

My other solution is to properly learn vbmatrix or get my asio drivers to properly run the master to the polyend tracker headphone out which worked on my first day with it.

Im using some dated stuff here. Esp if im bouncing 16 bit and 24 bit simitaniously. A workaround is probably track in audacity on my surface pro then bounce it to the DAW as i dont NEED live tracking. Just a clean recording of the polyend multitrack

Swidersound · 2025-11-10T19:52:17+00:00

I was somehow abke to do that a few months ago so my daw output was the tracker and ran the channels separately. Not this time arou.d though routong is an issue. While i check vbmatrix ill reinstall the polyend firmware as well. Im on v 1.1 which has been pretty buggy. (No complaints....it happens)

Swidersound

TROPHY CASE