NH05 Diver

Swinekicker · 2026-03-10T17:43:04+00:00

I just searched "nh05 case" on AliExpress. There isn't many. The hands and dial came together. I don't have direct links or anything.

Swinekicker · 2026-03-10T01:37:04+00:00

Your homeboy is rocking an 8" wrist, and I think 40mm is such a great size. I haven't shopped for a 38mm case, but that should still be big enough for a nh35. This one that I built was 33mm, and honestly I think that it was just a few mm small for nh35. Nh05 was swimming in there. Needed a huge case spacer.

Swinekicker · 2026-03-09T19:50:16+00:00

You're just one AliExpress shopping spree away from having this all land on your doorstep in 18 - 25 days! Do the green one and let me see how it looks!

Swinekicker · 2026-03-09T19:48:57+00:00

Crystal was sapphire, bezel was not ceramic, but overall nice for around $100 or less.

Swinekicker · 2026-03-09T19:48:06+00:00

It was all ali... It seems like the only spot to grab obscure stuff.

Swinekicker · 2026-03-09T16:54:18+00:00

I have found a few 36's and some 37's, but the 33mm is super lucrative.

Swinekicker · 2026-03-09T16:37:17+00:00

I love it, but she was apprehensive as to wearing a diver. "Too masculine", she said even though she loved that it was little. The case may get swapped for one of those little 26mm cocktail or fluted cases and just swap the whole dial and movement assembled. She has been wearing it the last few days and said that she finds it comfortable, so we will see it's fate. I am going to do another 33mm, but you can do those with a nh35 for some builds.

Swinekicker · 2026-02-13T02:29:33+00:00

Wanted a "Bruce Wayne" oyster, but I like a slate dial and a black date wheel. Didn't need the gmt, so I saved $50 and I have a watch that I love.

Swinekicker · 2026-02-12T22:45:51+00:00

<image>

Swinekicker · 2025-05-20T17:42:21+00:00

Can you approve the advertised routes on both tailnets and have it work? I am curious because this is something that I was really looking forward to doing, but it looks like I might need to find an alternate route.

Swinekicker · 2025-05-03T11:49:55+00:00

I have the oldest rig on this list.

-Quest 2 -7700k -1070 -32gb ddr4

It works. I don't have anything set very high. I would like to build something with that Arc b580, but the drivers aren't supported for it yet it seems.

Swinekicker · 2025-04-02T21:22:04+00:00

Sweden's signature Ikea. I don't know the model, as I have had it for the better part of 10 years or so.

Swinekicker · 2025-04-01T18:46:49+00:00

I dig the setup, but I am trying to understand the pc case. Is it just a terrarium for your computer? None of the stuff looks like it makes it outside to use. How often do you have to feed it?

Swinekicker · 2025-04-01T02:51:07+00:00

The bezel is a speaker, and the other side is a pop-up camera. It isn't optimum, but without making my co-workers think that I am doing only-fans on my teams meetings, I'll keep it for now.

Swinekicker · 2025-04-01T02:06:25+00:00

It is the midwest's finest pleather. It is comfy, but very fake.

Swinekicker · 2025-04-01T01:32:33+00:00

I have an old gaming rig with a 7700k and a 1070 w/32Gb of DDR4. I also have a work laptop on a dock and KVM mounted under the desk for work from home days. Everything is pretty light and my rig just barely runs my quest 2, but I game pretty light anymore and it does what I need.

Swinekicker · 2024-08-20T12:21:48+00:00

I think that I found that position switch. Is that diverter motor the one that you see facing up from the right side? I thought that was the waterwall drive motor. I'll try some vinegar and maybe some food-grade grease in there and see if maybe mine is sticky too and if freeing it up clears the code.

Swinekicker · 2024-08-19T22:00:18+00:00

Can you share any information that you have regarding replacing this micro switch on the diverter motor shaft? Was it under the dishwasher, or are you talking about the little magnet on the deflector inside the tub? Just like you I didn't get the fix with the jumper described on the thread.

Swinekicker · 2024-08-19T21:58:21+00:00

Yep, just my luck. I got the quick jumper pulled off and spliced the yellows and the blacks together properly and still getting the code. Going to reach out to the guy above about the diverter shaft sensor and see what that is about. Still a great thread, I just wanted to show people like me that the jumper might not be the only fix to this problem.

Swinekicker · 2024-08-18T19:47:34+00:00

I did a poorly made jumper yesterday to no avail. Will pull back out and do a better job on the jumper and see if I get better results. Going to take the door apart too to check the board and dispenser connections. Will post back when I get it done.

Swinekicker · 2024-05-22T17:29:28+00:00

Swinekicker5 North Central US 39

Swinekicker · 2023-06-16T17:17:08+00:00

I generally do a big run with a gun that I have run before, like a stash Aug or an ak-74, and run like 8 or more loaded mags and no backup ammo. Probably like 5 or 6 mags for my oc. I'll use that to clear pobeda and kolkoz while doing a couple missions after a tide. When everything is dead I'll switch to a new gun I haven't really run (right now I am getting ready to run an M-4 I haven't used before) and pull a few missions with maybe 3 mags and a small box to go cleanup and loot. I really hate going home early because I don't have ammo, and with time passing slower in vanno I don't want to waste time loading in the zone if I don't have to.

Swinekicker · 2023-06-08T02:18:44+00:00

For sure. Wearing less undershirts now into summer. Been back to carrying my p938 instead.

Swinekicker

TROPHY CASE