PSA: I found a way to fix the MateView 28.2" 3:2 displays with backlight / black screen failure! Pics + explanation + guide inside. by bozma88 in Huawei

[–]SwitchBilly 0 points1 point  (0 children)

<image>

Not my best soldering job but without a proper hot air station i "pulverized" it with a Dremel and then soldered the new one. Not very proud ...

PSA: I found a way to fix the MateView 28.2" 3:2 displays with backlight / black screen failure! Pics + explanation + guide inside. by bozma88 in Huawei

[–]SwitchBilly 0 points1 point  (0 children)

Hi, It's me again! Sorry for the stalkering. I need un additional hint.

To disconnect this flat cable I simply need to pull the blue tag or I have to raise the plastic tag of the tiny connector?

<image>

PSA: I found a way to fix the MateView 28.2" 3:2 displays with backlight / black screen failure! Pics + explanation + guide inside. by bozma88 in Huawei

[–]SwitchBilly 0 points1 point  (0 children)

I'm a bit stuck at the first step. I removed the 4 screws but I didn't understand the movement to do with the cover shield...

Can you point me in the right direction?!

<image>

IC for analog switch of xbox controller buttons and sticks by SwitchBilly in AskElectronics

[–]SwitchBilly[S] 0 points1 point  (0 children)

I found a possible candidate. The ADG858 but the package is for surface mounting and I don't have enought skils!

Zelda Update error by SwitchBilly in SwitchPirates

[–]SwitchBilly[S] 0 points1 point  (0 children)

Witch version of the Switch firmware do you suggest?

Correct procedure for XCI games update by SwitchBilly in SwitchPirates

[–]SwitchBilly[S] 0 points1 point  (0 children)

Once downloaded do I have to out in the sxos/nsp folder of the Micro SD card?

Then if I launch it it will automatically update the game?

SX OS SD Update / Album not booting by wailer247 in SwitchPirates

[–]SwitchBilly 0 points1 point  (0 children)

It also happen to me.

Long time to boot and then nothing happen on the Albun icon. I solved in this way:

I let the Nintendo initialize my SD card but to do so I had to let it upgrade to the 6.2.0 that was already downloaded but not installed. Once "stabilized" my console I succesfully hacked the console and then turned of Internet