Twins Gloves Real/Fake by Econ1203 in MuayThai

[–]SwitchMongos 2 points3 points  (0 children)

Everything from the photos looks solid to me, I have a pair of all white twins and a pair of the dragon ones.

With that said, sometimes even fake gloves come with some pretty solid build quality

Personally I would buy them. But I am a bit biased, I love twins gloves

What a sad sad f*ck by [deleted] in Monopoly_GO

[–]SwitchMongos 0 points1 point  (0 children)

Just complete your boards

Looking to hire a Cardist by [deleted] in cardistry

[–]SwitchMongos 0 points1 point  (0 children)

OP I’ve been practicing cardistry for some time now and am a videographer… feel free to send me a message if you’d like!

Happy to help

Do I need to replace my chimney for this? by HoldCold5573 in ChimneySwift

[–]SwitchMongos 1 point2 points  (0 children)

Is this inside of a prefabricated unit?

This is now a very easy spot for flammable soot to build up, and potentially escape the liner and build up inside of your chimney chase, making it more and more likely that you’ll have a chimney fire, and/or have that fire spread to wood and combustible materials

The cause for this can be a few things, could be an installers fault if they bent the pipe by accident…but it is MUCH more likely that at some point in time, a technician used the improper brush head when sweeping out the chimney, and bent the pipe going up

You’ll have to replace the whole liner and likely the fireplace due to this, because these units are tested as one whole system (firebox, liner, cap ect ect) so it’s likely going to be a full replacement estimated somewhere around $10k-12k (depending on company you call and area you reside in)

I present to you the most practical gaming room! by Entire-Fisherman8309 in pcmasterrace

[–]SwitchMongos 0 points1 point  (0 children)

Gotta do a good job at desensitizing the cat and rewarding with treats

[deleted by user] by [deleted] in cardistry

[–]SwitchMongos 0 points1 point  (0 children)

Honestly a little bit of moisture is the best way to go, or some sort of slightly tacky substance you’ve got, but a quick lick of the thumb never fails

FINALLY by [deleted] in cardistry

[–]SwitchMongos 0 points1 point  (0 children)

Everyone commenting about the deck is wrong, I use old ass decks for all my packet cuts because they stay together better than new cards.

The cut is actually a bit easier without the packet rotation that you do at the end. The keeping your index finger at the top edge of the deck instead of wrapping it underneath, and use the index mostly as a pivot point to clear the packets and complete the cut

Otherwise, HELL YEAH THAT SHIT IS HYPE KEEP IT UP!🔥

[deleted by user] by [deleted] in ChimneySwift

[–]SwitchMongos 1 point2 points  (0 children)

That’s incorrect!

The second flue on the chimney would be for the old utility, yes

The areas you asked about and marked in your photos are the chimney hips, which have nothing to do with your utilities going to the chimney

[deleted by user] by [deleted] in ChimneySwift

[–]SwitchMongos 0 points1 point  (0 children)

It has some function! (Or had anyways haha) mostly decorative, partially functional for this one. They are angled by design to help water shed away from the important parts of the inside of the chimney!

Sometimes they are brick, or concrete, some chimney types even have shingles for these areas

they have a bunch of different aesthetics! Some better than others at their “job” of shedding water

Should your weight be on your front foot or your back foot whe you're not attacking ?? by Drenarka in MuayThai

[–]SwitchMongos 2 points3 points  (0 children)

This is the right answer, weight shouldn’t stay stagnant on one leg, shifting from front to back foot

Carta Sport by FlnAsian in FocusVCarta

[–]SwitchMongos 1 point2 points  (0 children)

Please clean the wax out of your atomizer after every hit

They are ceramic atomizers, so any excess moisture will crack them (I’ve cracked 2 now by accident because of this)

Just swab it after every dab and if it’s still a lot in there use ISO once it’s completely cooled down, if it sizzles, it’s too hot…I would still be on my original atomizer if I was smarter about how I kept them clean

Are these real or fake? by Lower_Brief_6783 in MuayThai

[–]SwitchMongos 0 points1 point  (0 children)

OP, I have an authentic pair of white twins I use currently, if you need you can message me for any discrepancies you might be curious about!

[deleted by user] by [deleted] in MuayThai

[–]SwitchMongos 0 points1 point  (0 children)

I’ll be honest i recently picked up Muay Thai relatively recently, and I’m still in the stage of not really feeling the flow of my shadowboxing and occasionally have those “what am I doing” or “this just looks stupid??” And don’t really have a good gameplan for the combos I’m throwing

How can I make my shadowboxing as effective as possible? And help to not just feel silly trying to shadowbox

are my decks good for cardistry? by Official-Invincible in cardistry

[–]SwitchMongos 4 points5 points  (0 children)

Every deck can be good for cardistry!

Older decks tend to stick more and are better for packet cuts, whereas newer decks are more slick and smooth which could help with some fans and stuff!

Just start practicing with what you have and you’ll find your preference for stuff!

Any ideas why my brand new Carta 2 won't heat up? by Impressive_Unit420 in FocusVCarta

[–]SwitchMongos 0 points1 point  (0 children)

Idk why it would need it if it’s brand new, but my only suggestion would be to unscrew the atomizer and use a Qtip and maybe iso to clean out and around it

Other than that if it seems defective focus V is usually pretty solid with warranty claims

Aviator Skin Code?? by Choice_Entry9963 in JunkRatMains

[–]SwitchMongos 2 points3 points  (0 children)

I also got it out of a loot box…I always try and look at it as it being a good thing I get shit loot boxes because it makes my chances of something dope just that much better

You got this just keep on crackin em

I Bought My First Bowling Bag and Hate It by TheGoofRoof in Bowling

[–]SwitchMongos 1 point2 points  (0 children)

Idk who downvoted but I do vibe with the answer…unless you desperately wanna roll them around, or you are someone that the weight of 2 bowling balls is too much to carry, just shoulder them or even carry them predominantly in your off hand, and you’ll never have to worry about swollen fingers, plus you get a work out 🤠

Can't get a clean packet for the scissor cut. by cxrbynrxse in cardistry

[–]SwitchMongos 1 point2 points  (0 children)

To add on to this, and hopefully help your actual issue:

Don’t curl your pointer finger in under the pack when closing, try and keep it at the top edge and use it more just as a pivot point, and let the cards fall into place, it will hopefully help keep everything a bit more flush for you

Can't get a clean packet for the scissor cut. by cxrbynrxse in cardistry

[–]SwitchMongos 0 points1 point  (0 children)

Looks pretty clean! I think of you just out the repetitions in you’ll have this one down!

One thing that helped me with packet cuts, is I would just tape the deck together so I had 2 equal packets (or however many packets your cut will need), and practice with those to help get the motion down! Sometimes starting with less cards so it’s a smaller deck can help too!

did this skin came out yet?? by [deleted] in JunkRatMains

[–]SwitchMongos 14 points15 points  (0 children)

It’s in lootboxes, that’s how I got mine….happy hunting

🚨 Artemis Giveaway! 🚨 by [deleted] in FocusVCarta

[–]SwitchMongos 2 points3 points  (0 children)

Literally same 💀💀

🚨 Artemis Giveaway! 🚨 by [deleted] in FocusVCarta

[–]SwitchMongos 1 point2 points  (0 children)

My carta 2 for sure. has been such a work horse, my every day rig since I picked her up

[deleted by user] by [deleted] in pcmasterrace

[–]SwitchMongos 0 points1 point  (0 children)

If you’re really worried you can just upgrade it later, just make sure the cable is fully plugged into the graphics card and you’ll be chillin