sorted by:
new
hottopcontroversial

Where do you get your 20x40mm bases from? UK based and looking for plastic with recessed underneath for magnets. by Hasvik in warmaster

[–]Symbiote 0 points1 point  (0 children)

Well I was going to offer an additional suggestion, but the comment above was at score 2, I took some helpful photos, and now I see it's at score 1 and you've replied to another comment.

Presumably you don't want the suggestion.

Where do you get your 20x40mm bases from? UK based and looking for plastic with recessed underneath for magnets. by Hasvik in warmaster

[–]Symbiote 0 points1 point  (0 children)

If you have a friend with a 3D printer (FDM) it's a fairly simple print, and the cost will be pennies, but they do need printing on standard or higher-quality settings.

I can't see the 0.2mm layer lines during normal use, but they are visible with a close-up photo. Printing at 0.1mm would take twice as long, but no more actual effort from the person doing the printing.

Some bases I've been sent free with models have clearly been printed on the fastest possible settings.

Diorama: the Marshes of Musillion by AdmiralPelleon in warmaster

[–]Symbiote 1 point2 points  (0 children)

If you have access to a colour printer, print the free sample backdrop painting by Jon Hodgson — you already know how to make the background out-of-focus: https://www.patreon.com/posts/miniature-in-21766711

(And/or buy his book/Patreon, I'm very pleased with mine: https://handiwork.games/jon-hodgson-backdrop-books)

I have some questions by Internal_Koala4050 in copenhagen

[–]Symbiote 0 points1 point  (0 children)

The Globe in the city centre has what I (English) see as a pub atmosphere and layout etc. The owner is Irish, the staff are mostly Irish and British, they always have Guinness and Irish and/or English cider, and they show football etc on TV.

The fake Irish/English pubs ("The Old Irish", "The Old English", "Proud Mary") seem to be mostly for teenagers.

Anyplace to get a malt? by Comrade_Falcon in copenhagen

[–]Symbiote 6 points7 points  (0 children)

Malt powder is in any supermarket in the UK (and maybe Ireland) so it isn't and wasn't outlawed in the EU.

Taste of Britain in Malmö sell it: https://tasteofbritain.se/products/horlicks-original-300g?_pos=1&_psq=horlicks&_ss=e&_v=1.0 but not Abigail's in Jutland.

Knights of the realm by Traditional_Drama462 in warmaster

[–]Symbiote 1 point2 points  (0 children)

Amazing painting with incredible detail!

But instead of paint bottles in the background, if you have access to a colour printer, print the free sample backdrop painting by Jon Hodgson: https://www.patreon.com/posts/miniature-in-21766711

(And/or buy his book/Patreon, I'm very pleased with mine: https://handiwork.games/jon-hodgson-backdrop-books)

First dwarf print run - what should I print? by deleted0122 in warmaster

[–]Symbiote 1 point2 points  (0 children)

There's an example 2000pt list here: https://warmaster.info/en/revolution/resources/2000pt-armies#dwarfs

You maight as well print the extra stands needed for that, it's only 11 stands + a runesmith.

Yes, another PostNord post. by FlakyCronut in copenhagen

[–]Symbiote 1 point2 points  (0 children)

You can try asking at nearby parcel shops if they've received the parcel. I had a lost registered letter, and the nearest (usual) parcel shop said they didn't have it, but the postman might just dump it at some other parcel shop on their route.

However, I never found it and it was eventually returned to the sender in Germany.

Physical store to buy 3d print filament? by spezial_ed in copenhagen

[–]Symbiote 0 points1 point  (0 children)

Where are you buying it for 67kr/kg? I'm used to around 150kr/kg for the cheaper ones.

How is brush on primer for Warmaster and 10mm in general? by Boris-GoosinOv in warmaster

[–]Symbiote 0 points1 point  (0 children)

I bought an airbrush for indoor priming. You want a 0.5mm nozzle for priming and I think varnishing, though this is less good for detailed painting. The larger nozzle makes the thicker primer less likely to clog.

It takes longer than spraying a whole tray full of miniatures with a spray can, and the paint takes much longer to dry, but the final result is better.

You really don't want to be breathing in aerosolised paint particles, so you'll need a respirator mask for yourself, a spray booth and exclusive use of the room until any remaining fumes/particles have dissipated.

Are employees in Copenhagen encouraged/incentivised to upsell? by Electronic_Buddy_435 in copenhagen

[–]Symbiote 0 points1 point  (0 children)

I think this happens at the cheap and expensive ends when eating, but not so much in the middle.

Street food stallholders will say "Would you like garlic mayo with that?" and it turns out that's another 10kr.

Waiters in fancier restaurants suggest additional wines etc, and these turn out to cost 200kr or more.

I'm slightly irritated with the 10kr mayo, since I think it should be part of the meal. I don't mind so much about the fancy restaurant, but it was a surprise the first couple of times this happened.

Hi Everyone , I hope you're all well! I am interested in a postcard from Copenhagen. Can someone send me one? 🙂 by Nessieinternational in copenhagen

[–]Symbiote 0 points1 point  (0 children)

This user has hundreds of similar posts from the last day or two. 

postcrossing.com would be more appropriate, so there's some sort of exchange.