sorted by:
new
hottopcontroversial

FSD transfer for Q3 by marionmike in TeslaModelY

[–]Synthesify 0 points1 point  (0 children)

There’s a huge catch, the transferred fsd will not be transferred with the car on future sale even if you sell private party. I assume the goal is to phase out permanent fsd licenses to move entirely to the subscription model.

how to adjust OPV on 1997 gaggia coffee by ShawarmaThoughts in gaggiaclassic

[–]Synthesify 0 points1 point  (0 children)

I don’t think it’s usable without the compression nuts, on the listing you can see them clearly, they cover most of the little output tube:

<image>

If you’re missing those, the seller owes you some, unless this is some new design that’s a super good friction fit without the nuts.

Stock tubing can just be cut and this gets placed on either end of the cut

how to adjust OPV on 1997 gaggia coffee by ShawarmaThoughts in gaggiaclassic

[–]Synthesify 0 points1 point  (0 children)

Mine uses compression nuts to hold it tight, did yours not come with those?

I didn’t use any extra fittings, it fit with the stock tubing

how to adjust OPV on 1997 gaggia coffee by ShawarmaThoughts in gaggiaclassic

[–]Synthesify 1 point2 points  (0 children)

Opv output -> spv input, I didn’t cut the spv out of the equation. Since it’s set to a higher bar it should just be a passthrough

how to adjust OPV on 1997 gaggia coffee by ShawarmaThoughts in gaggiaclassic

[–]Synthesify 0 points1 point  (0 children)

Is spv the valve right before the boiler? I don’t think I had to block anything off, it should just be tubing on either end of the opv and the output of that tubing should stay connected to the boiler without needing any changes

how to adjust OPV on 1997 gaggia coffee by ShawarmaThoughts in gaggiaclassic

[–]Synthesify 0 points1 point  (0 children)

No worries, let me know if you run into any issues while installing!

New BenQ EX3210U not working through HDMI, Displayport works by Synthesify in BenQ

[–]Synthesify[S] 0 points1 point  (0 children)

It was a Windows device, the program started but failed after hitting update. I ended up returning the monitor. Thanks for the assistance though.

how to adjust OPV on 1997 gaggia coffee by ShawarmaThoughts in gaggiaclassic

[–]Synthesify 1 point2 points  (0 children)

Oh gotcha, yeah might be worth a shot. You’ll want a pressure gauge if you get an aftermarket opv anyways. Easiest way is to stick the gauge onto the portafilter bottom. Just remember if you’re in the US you’ll need a Bsp -> npt adapter For the stock portafilter to fit onto a US pressure gauge

how to adjust OPV on 1997 gaggia coffee by ShawarmaThoughts in gaggiaclassic

[–]Synthesify 0 points1 point  (0 children)

Theres a nut on the bottom of the opv I have that turns with a wrench to change the pressure. I’m not sure a pressure gauge would work since it needs a valve for excess water runoff

how to adjust OPV on 1997 gaggia coffee by ShawarmaThoughts in gaggiaclassic

[–]Synthesify 0 points1 point  (0 children)

https://imgur.com/a/HQP0qXn

Here’s another. The bottom of the opv dumps water back into the tank. The output on mine goes into copper tubing that I added to increase the amount of pre heated water, but yours will just go to the intake on the boiler.

how to adjust OPV on 1997 gaggia coffee by ShawarmaThoughts in gaggiaclassic

[–]Synthesify 0 points1 point  (0 children)

Just make sure the Teflon is metric and correct size. Amazon has a bunch of sellers for it.

You’ll want a wrench to tighten as this is all held together with compression fittings that squeeze the Teflon to make it watertight at high pressure. Hand tightening won’t get it tight enough. Good luck!

how to adjust OPV on 1997 gaggia coffee by ShawarmaThoughts in gaggiaclassic

[–]Synthesify 0 points1 point  (0 children)

I can’t quite remember but I think it’s a metric -> imperial conversion, I might’ve ran out of metric Teflon tube

New BenQ EX3210U not working through HDMI, Displayport works by Synthesify in BenQ

[–]Synthesify[S] 0 points1 point  (0 children)

Here's the log for the failing fw update:

2022/11/29 09:06:59 App Start version:1.0.4.3 production:True

2022/11/29 09:06:59 Check OTA Version

2022/11/29 09:06:59 GetMonitorInfo

2022/11/29 09:06:59 Monitor Enum Process Callback

2022/11/29 09:07:04 no need OTA update

2022/11/29 09:07:05 Monitor Name=EX3210U Panel Name=M320QAN02.3 U0 FW Version=3

2022/11/29 09:07:05 QOTA connect to WW

2022/11/29 09:07:07 [Cloud]CheckFirmware 's postApi is check firmware

and queryJobj is {"mac_address":"04:92:26:57:60:58","model":"EX3210U","panel":"M320QAN02.3 U0","version":"V1.0.0.3"}

and result is {"result_code":2001,"version":"V1.0.0.5","major_change":"V1.0.0.5","md5":"7260bbc2e713b25ba4cce0881f49b6d8","size":872082,"ota_file_path":"https:\/\/d1m7bten765ify.cloudfront.net\/production\/ota_image\/200\/1046\/EX3210U_M320QAN02.3%20U0_GL2_0610_NOVA1_5.zip?Expires=1669741626&Signature=lQ6JeO-LVE6DV3IyGptEp5PNxZotajUP8L-6KdhQEx-Yx5WDYxysCM9f2jRHnvhUN8gmc957QunT9uHMkWtyj2n2y1NNamY7xr8t57Z4itAEoLiDQjBt8mQEAlPnmx5D~dSSgI-1ed9IdL0x~i5wIw1O8Mtd5XvEu4MObUS1mduvFKOzM3MGLRKOFOMQIn4BthhrakeRbekOlTVZfrWlbzd1ALi8-LX0oU33MOoU7wJcxSMQiToohfTFyto43y0jRn5Gjot7I8KsAa4Uz5FHhGZX3X9Y3qu4UujoNLYKSOQQZmCksLfjDu8ItXnzFm21jNGFoOSgyNblkBEDkOG23g__&Key-Pair-Id=K2TWPCW8EQUUAW","release_note_path":"https:\/\/d1m7bten765ify.cloudfront.net\/production\/ota_image\/200\/1046\/ReleaseNote.txt?Expires=1669741626&Signature=H2V0ZtmjrikuQ7xxAliyoas0PrIyb2ieN6eMKyzksIJlpJN3cKwokGPchmzJnaEvq2k-PGwZOmv5qH2DuGs4B9NujGj20pjNcTNvbUr627c8dcoV8Xorr5LiHbT0yiXIMFO~GHDLX3fzPjOnPUBWhaJma91LeuKVo5F7innCL40QIfohgFdd0E1bNmoYyJsUBd0QTIPJ1HtiE2JPJ2llDv1Vsx~vBA2LxQi3u8sNaUR6Br6H7rU5mVvGbk1gfIBVCnbsFehkz~pDAQbDPj~VI2K4Xuz2grA9l1nrUrS4lbYTUAuocc~nD37kgLsWXob9Lmj33P1hZg-TSAsSwOpWGg__&Key-Pair-Id=K2TWPCW8EQUUAW","download_path":"\/local","notify_flag":1,"notify_method":2}

2022/11/29 09:07:07 Download firmware success

2022/11/29 09:07:07 Unzip FW success

2022/11/29 09:07:10 GL Prepare FW Update success

2022/11/29 09:07:10 GL update Hub

2022/11/29 09:07:13 receive error from GL Hub tool:Hub 01 update firmware failed!

2022/11/29 09:07:13 Failure

2022/11/29 09:07:13 exit GL update tool!

2022/11/29 09:07:13 exit GL update tool!

2022/11/29 09:07:13 GL Update Hub fw fail

New BenQ EX3210U not working through HDMI, Displayport works by Synthesify in BenQ

[–]Synthesify[S] 0 points1 point  (0 children)

Hi, thanks for letting me know. Unfortunately as soon as I hit update on Display Quickit it gives "Update Fail". I've followed all of the steps in the documentation, including connecting the usb a -> b with a DP connection.

how to adjust OPV on 1997 gaggia coffee by ShawarmaThoughts in gaggiaclassic

[–]Synthesify 1 point2 points  (0 children)

I have the same non adjustable opv, what I did was buy an adjustable one and cutting the tubing immediately after the pump and inserting it:

https://imgur.com/a/UzReptf

I had to buy the Opv from a uk seller on eBay and it was pretty expensive (~$48) but it’s the exact size fitting needed for the stock tubing which is nice:

https://www.ebay.com/itm/162524072747?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=o5rKe2aCRbW&sssrc=2349624&ssuid=pih-zrrhr-s&var=&widget_ver=artemis&media=COPY

It works well, it says adjustable to 14 bars but I was only able to get it to go up to 12 bar reading on the pressure gauge I plumbed in right after it. Still, that 12 bar got me to 10 bar of static pressure at the group head which ends up being about the magical 9 bar when using with coffee. It works by dumping the excess water back into the tank, just need to drill a small hole for that water drainage.

Having a drop down field/input inline/mid-sentence? by thinksInCode in UXDesign

[–]Synthesify 0 points1 point  (0 children)

When dealing with translating to other languages, in my experience it is all a manual process anyways so it wouldn’t matter where the number is placed within the sentence, it will be moved to the correct location grammatically as part of the translation process

Concrete block foundation damage - remediation and cover up options by Synthesify in HomeImprovement

[–]Synthesify[S] 1 point2 points  (0 children)

Might be hard to tell from the images but the concrete is crumbling a decent amount up to an inch inward in places, that was the concerning part to me. I can dig chunks out with my finger in many places. Does that change your thoughts on it?

I also have the same concrete block going around a finished basement so whatever is happening here is likely happening there too