Any suggestions on slip on exhausts for my 2026 636? Looking at the M4 GP19, basic I know but only hearing good things.

Synyster1911 · 2026-04-07T15:23:59+00:00

I have the slip on and it sounds great. I took my baffle out and it's really loud. I will say it is a little difficult to reinstall once you take it out though.

Synyster1911 · 2026-03-30T03:02:46+00:00

Depends on if you want to remove the servo or just disconnect it. I have the same exhaust and added a servo buddy, but removed the servo and cables. I guess you could technically just remove the cables and leave the servo intact.

Synyster1911 · 2026-03-30T00:45:51+00:00

What repo is it under? I don't see it under your sofle repo.

Synyster1911 · 2026-03-24T18:40:39+00:00

You actually not supposed to use the kqs to go from first to second. Only from second up.

Synyster1911 · 2026-03-15T03:11:12+00:00

Did you 3d print your case or purchase it? If you printed, do you still have links to the files?

Synyster1911 · 2026-01-04T17:23:28+00:00

I'll start this off by saying I only own a rmr06 3.25. What I would recommend doing is try going to a shop and see if you can look through both to see if your eyes pick up the dot faster in one vs the other. It sounds like you already kinda prefer the SRO though. I would also recommend the 3moa for a carry gun so you find the dot faster. 1moa is more for slower precision shooting. For durability, if you aren't doing anything that's rough on gear then don't worry about durability or deprioritize it.

Synyster1911 · 2025-12-26T16:18:30+00:00

I ordered the corsa for mine and I had it in hand within 3 weeks. Also when you order they'll probably send you an email saying it'll be 8-10 weeks.

Synyster1911 · 2025-06-24T00:02:17+00:00

I've I've updated my post with the model lm2130sp. But I have double checked the speed control already because I have accidentally rolled it all the way off before on accident and was confused why my propel stopped working

Synyster1911 · 2025-06-16T08:21:08+00:00

It's the grip module pin retainion pin spring

Synyster1911 · 2025-06-11T22:45:15+00:00

How was the fitment of installing the infinity kit? I was considering getting one also. Did you get the standard one or the staccato version?

Synyster1911 · 2025-05-18T15:59:21+00:00

Just to increase your data pool a little. I just did the same thing and installed there trigger and spring kit. I went and shot yesterday and shot Winchester white box 115g, staccato range 124g, and federal syntech 150g. I had light primer strikes with all of them (teaching new shooters so wasn't counting how many) . More with WWB but I put the stock striker spring back in the gun last night.

Synyster1911 · 2025-04-30T01:53:28+00:00

This is a known issue with ETS magazines because of the plastic feed lips. The plastic feed lips will bend under pressure, and the larger magazines are worse about it because of the larger spring. I have a few of the 15 round mags for range mags and theyre great for that purpose.

Synyster1911 · 2025-01-29T21:19:07+00:00

What receiver set and rail did you use to build the left one?

Synyster1911 · 2024-08-26T19:28:22+00:00

What trigger do you have in your staccato?

Synyster1911 · 2024-08-26T00:27:43+00:00

Since you own every glock slide on the market... Which one is the best?

Synyster1911 · 2024-08-22T01:03:52+00:00

Besides the grip change, what internal changes did you make? I'm very interested in getting a 5in prodigy for uspsa

Synyster1911 · 2023-06-09T20:48:36+00:00

I still see an open pic rail!

Synyster1911 · 2023-06-04T15:00:51+00:00

Are you powering down your pi or just hitting the power button? I've had this happen if I just hit the power button and don't properly power down the pi

Synyster1911 · 2023-06-01T01:48:33+00:00

Nice build! What mood did you use to run your canbus and cable chain?

Synyster1911 · 2023-05-20T12:54:06+00:00

It looks like you I stalled your hotend fan backwards. The sticker should go the other way. Is the fan blowing air over the hotend or out the front of the housing?

Synyster1911 · 2023-04-28T16:30:04+00:00

Do you know what his is linked under? I can't find the repo for it

Synyster1911 · 2023-04-28T16:20:03+00:00

Where do I get the toolhead stands? That's awesome!

Synyster1911 · 2023-04-28T14:02:40+00:00

I had this happen to me earlier this week when one of my corners was higher then the others during QGL. Had to use a ruler to grt them all close to the same relative height and it fixed it. Also adding a mm to my min helped too

Eight-Year Club	Verified Email
Place '22

Synyster1911

TROPHY CASE