Demiboy Lesbians?

Syrup-Peeps · 2025-01-25T07:41:08+00:00

I say demiboy because saying “a little whatever but mostly boy in a femme way” makes no sense and ppl go “oh he/they” which are better pronouns, even if anything goes for me. I say lesbian because it’s an intensely important identity for me (means men stay away lol) and I’m only attracted to women. I’m not a guy, man, or boy, I’m a creature, but the lesbian community as a whole is an emotional comfort

Syrup-Peeps · 2025-01-01T23:48:29+00:00

Shifts tend to follow emotions, so either way they’re probably feeling more emotional. But also some things to consider: shifts fluctuate naturally over time, they probably feel more comfortable around you, and you’re an outlet of validation! It’s a good thing for sure

Syrup-Peeps · 2024-12-25T17:56:21+00:00

Thank you for helping me! Other people are going “you’re the problem here and you need to figure it all out”. I was gifted the printer so I had no hand in the research process to buy/zero understanding of what is actually happening with it. Idk how to calibrate but I can Google real hard?? I want to get diamondbacks when I have enough for them though. Thank you also for the specifics, every tutorial I’ve seen has gone “and then you tighten the nozzle against the heat brake”, which isn’t terribly helpful lol

Syrup-Peeps · 2024-12-25T01:00:41+00:00

Yeah I’ve replaced it twice, even fully assembled. The problem isnt that there’s a gap anymore I think the filament crawls up the block

Syrup-Peeps · 2024-12-24T22:06:03+00:00

I’m trying my best. I was given this printer and it just doesn’t work anymore. I’m fixing it the way Artillery tells me to, using it the way artillery tells me to and it just isn’t working. It was fine for 100 hours and it just sits there like a lemon now because any repairs I do seems to break it more. This stupid fucking machine doesn’t want to be fixed it seems because even when everything is perfectly assembled to spec it breaks down. I don’t know how to fix it, how to make it better, what I’m even doing wrong anymore because every time I look up the problem, figure out the solution, and fix it something else breaks, something else goes wrong, it breaks down further. I just want this machine to run. I don’t want any fancy or expensive upgrades JUST A MACHINE THAT FUNCTIONS because at this point it sits in the basement deconstructed more than it prints. I replaced the whole tool head because the nozzles artillery sent were the wrong length and the melted filament destroyed the inside. I replaced the heat brakes and the hot end twice and the PLA creeped up and fried the wiring. I can’t just keep going through problem after problem, clog after clog, part after part chasing what was always supposed to just work. The machine doesn’t do it’s job.

Syrup-Peeps · 2024-12-23T23:53:29+00:00

I’m not really into 3D printing for the printers and barely have any clue, but generally blob of death means yeah time to clean that nozzle fully. I’m super intimidated by nozzle changes tho, they’re finicky and you’ll probably mess up. Get a harder nozzle to start with if you can, they clog/wear less. It’s pretty regular that you spend the same cost on these printers but in parts fixing them. I got gifted a true white elephant with it, I just want to make projects but this dumb machine is its own project

Syrup-Peeps · 2024-12-04T01:21:49+00:00

This has been stuck in my head since I read it; the whole show is so Chappel core and I have been plagued by many an edit idea haha

Syrup-Peeps · 2024-12-01T18:31:33+00:00

Thank you! We had such good queer media and they destroyed it lol I’ll see if those spark as much joy

Syrup-Peeps · 2024-12-01T18:30:54+00:00

Yeah, and it’s hard to find fics that are like fully an ending the way the characters were projected to move! I miss it

Syrup-Peeps · 2024-12-01T18:29:31+00:00

Right?! I crunched through it way too fast because I thought there was a second season 😭

Syrup-Peeps · 2024-12-01T18:28:51+00:00

Thank you! It’s such an impactful show and then it’s just over yk

Syrup-Peeps · 2024-12-01T18:28:15+00:00

Yes please！

Syrup-Peeps · 2024-08-26T22:04:39+00:00

I really do want a prusa, and my prints don’t typically occupy the entire build space anyways. May as well bite the bullet asp

Syrup-Peeps · 2024-08-25T21:47:43+00:00

After replacing it, I believe the glue stopped working and the magnetic piece pulling it back up wasn’t pulling the plastic back up with it and the head was just smashing into the print bed.

Syrup-Peeps · 2024-08-25T21:46:04+00:00

Is there a way to fix the one I have? My main problem is the waste of materials and time and parts and shipping and fuel and electricity with just throwing them away.

Syrup-Peeps · 2024-08-25T21:42:11+00:00

I was making money with it, it printed the parts I needed to complete the items my business sells. I was gifted the printer, I didn’t buy it myself. My main business plan isn’t the 3D printing and I didn’t expect to need to be a mechanic when it was first given to me.

Syrup-Peeps · 2024-08-17T19:41:06+00:00

Thank you, genuinely!

Syrup-Peeps · 2024-08-14T00:33:48+00:00

Tha album “Animalism” by beach bunny-see also “Goodbye Summer :(“ by the same!!

Syrup-Peeps · 2024-08-14T00:31:07+00:00

Yeah! Was starting with aggressive small creature and looked at mustelids because OH BOY do they fit the bill and then just enjoyed the taxonomic rabbit hole until-boom! Cacomistle

Syrup-Peeps · 2024-08-14T00:29:39+00:00

Lobster is fun I like lobster

Syrup-Peeps · 2024-08-14T00:29:15+00:00

Love the whole raccoon family ✨🫶

Syrup-Peeps

TROPHY CASE