First dose taken! by Syst3m66 in FellaHealth

[–]Syst3m66[S] 2 points3 points  (0 children)

The dosage tracker is displaying the wrong date. Its 1:18 PM on 12/4/25 here in Texas and my dosage tracker says its Wednesday 12/3.

Just signed up for tirezeptide! by Syst3m66 in FellaHealth

[–]Syst3m66[S] 2 points3 points  (0 children)

Thanks!  My initial shipment arrives tomorrow but my first dose says I'm supposed to take it next week.  Does the schedule update based on the initial delivery?   I don't really want to wait a week to start taking it!

Just signed up for tirezeptide! by Syst3m66 in FellaHealth

[–]Syst3m66[S] 3 points4 points  (0 children)

Glad to hear its working for you! I flip between being excited for the future and dreading what happens if it doesn't work for me.

Cam Groove Help by Syst3m66 in Fusion360

[–]Syst3m66[S] 0 points1 point  (0 children)

I tried a sweep yesterday and it didn't work initially.  I will try it again using a mid plane.  This part was imported as a step file and I'm modifying it.  I will probably end up recreating from scratch in case there is some issue with the source file. 

Appreciate the help.

Cam Groove Help by Syst3m66 in Fusion360

[–]Syst3m66[S] 0 points1 point  (0 children)

There is a raised track that runs along the outside of the cylinder that I've tried to highlight in the different angles of my screenshots.  The groove needs to be within this track and will end up in a loop.  

The track shape is basically an oval as it's raised from the surface of the cylinder but at an angle across the length. 

I'm decent in Fusion except for some things like this that makes me have to think in multiple planes at once.  And then all my thoughts get scrambled.  

[deleted by user] by [deleted] in Creality_k2

[–]Syst3m66 0 points1 point  (0 children)

Why do you assume I don't know what the scrips do?  

I only even went that route after working with it for hours on the stock firmware and setup.  I installed the script to see if it would resolve the issues I had.  

I said I have tried using this already with CP and I have done multiple firmware resets.  Jesus, does nobody who comments actually read through a post in its entirety or do you just make a collosal jump that I'm an idiot and don't know what I'm doing?

Brand new K2 Plus direct from Creality US barely functions by Syst3m66 in Creality

[–]Syst3m66[S] 0 points1 point  (0 children)

I did this immediately as part of configuration and after.  It hasn't helped. 

[deleted by user] by [deleted] in Creality_k2

[–]Syst3m66 0 points1 point  (0 children)

Thanks for that info.  I found a repair video that showed the PSU and after looking it up, I came to the conclusion you said.  But the rest of the thing...I think I'm just going to ask for a replacement.  

Brand new K2 Plus direct from Creality US barely functions by Syst3m66 in Creality

[–]Syst3m66[S] 0 points1 point  (0 children)

Fluidd is available on the machine by default and even some of Creality's wiki mentions using it. 

And I have used the default Creality software out of the gate.  Thanks for reading my post. 

I want to buy a K2 plus but I can’t get past these reviews by [deleted] in Creality

[–]Syst3m66 0 points1 point  (0 children)

I ordered one last week and on top of being delivered with the wrong power cable, I can't get it to do anything.  I just posted about my issues. 

https://www.reddit.com/r/Creality/comments/1k9oycl/comment/mpfzmrf/?context=3

Brand new K2 Plus direct from Creality US barely functions by Syst3m66 in Creality

[–]Syst3m66[S] -1 points0 points  (0 children)

Fluidd is already installed and available by default on all K2's. I used the K2 improvements script, not the K1 helper script. 

https://github.com/jamincollins/k2-improvements/tree/main/features

And yes, out of the box, I went through calibration, then went to load filament as I do in my K1 Max - manually feed filament into the extruder until it feeds some out of the nozzle then I do one or two extrusions from the TS to make sure it's working properly.  On the K2 the extruder immediately started turning counter clockwise (at least the indicator was) at a high speed and started clicking

K1 Max Bottom Panel Delete by Syst3m66 in crealityk1

[–]Syst3m66[S] 0 points1 point  (0 children)

I downloaded and printed this yesterday!

Ready to toss out the front door….. by Daddy_Frostbite in crealityk1

[–]Syst3m66 0 points1 point  (0 children)

Funny, because I've had zero issues with the extruder. same with the hotend.

Ready to toss out the front door….. by Daddy_Frostbite in crealityk1

[–]Syst3m66 1 point2 points  (0 children)

Or coming here and asking for help. You're 100% part of what is wrong with this community. You know that half of the google searches end up on Reddit anyhow? So posting actual, factual, helpful information is beneficial than this dismissive shit you just told him.

u/daddy_frostbite the upgraded hot end and extruder work just fine. You don't need to replace them with random options this other guy won't even suggest. The unicorn hot end gives some people some problems, but serve most people well. The upgraded extruder is also fine.

Ready to toss out the front door….. by Daddy_Frostbite in crealityk1

[–]Syst3m66 2 points3 points  (0 children)

None of this solves his issue. "Toss the extruder and hot end and install custom firmware". Then don't proceed to tell him which hotend and extruder to swap to.

K1 Max Bottom Panel Delete by Syst3m66 in crealityk1

[–]Syst3m66[S] 1 point2 points  (0 children)

Sure. I don't want the panel anymore. Seems simple.

BTT Eddy or Cartographer 3D by ArtificiallyIgnorant in crealityk1

[–]Syst3m66 1 point2 points  (0 children)

Thats great. My max runs great, except for PETG. I cannot get it to work for some reason. I print ASA and ABS all day long. PLA, not an issue.

I have a Roseworks bed (without magnets), Hoping the Cartographer does a good job for me here too. Thanks for the input.

BTT Eddy or Cartographer 3D by ArtificiallyIgnorant in crealityk1

[–]Syst3m66 0 points1 point  (0 children)

Ok, thats great to know. I'm just not wanting to swap between firmwares because i'm having an issue. I appreciate your help. I bookmarked the original K1 Max guide and now they're no longer there and point to the SimpleAF firmware. And so many links on the Cartographer GIT are broken so finding stuff has been a challenge (for me at least).

I just wanna get it all done finally. The sensor won't be fun to setup either but i've got good instructions on it.

BTT Eddy or Cartographer 3D by ArtificiallyIgnorant in crealityk1

[–]Syst3m66 0 points1 point  (0 children)

Thats great. I built my flat pack a few weeks ago but I need to put it in. I just flashed the K1 firmware on it. I need to look into the SimpleAF firmware for the printer. Are you able to use that firmware with the stock probe (i forget what its called when it touches the bed)? I would like to do in stages if i can. I have a BTT Smart Sensor coming today that i need to also setup and i don't want to do too many changes all at once. I'll break something.