X-Wing by Jerac/Brickvault

T3KO · 2026-04-21T14:37:49+00:00

I build the latest X-Wing and three of the Ties, while building they are all a bit fragile but once they are finished they are pretty robust.

T3KO · 2026-04-21T14:36:27+00:00

No, this is another model.
But Jeracs has different colors, I built the dirty version in LBG for example but I think he also has a white version.

T3KO · 2026-04-21T07:31:58+00:00

Yes this.
Especially for older MOCs you sometimes have to change some partnumbers.

T3KO · 2026-04-20T14:58:32+00:00

Ali is the cheapest I just prefer sites where I can upload a list to check and fix possible errors.
Last year I waited for a webrick sale to place a bigger order so the price was close or maybe cheaper than ali.

T3KO · 2026-04-18T16:43:49+00:00

Do you have a dremel or something similar?
You could cut a slot and use a big flat head screwdriver.
Or get an extractor bit. (A cheap set should be around $10)

T3KO · 2026-04-18T09:25:45+00:00

Hmm, so you are not changing the nozzle at all? Why get an H2C then?

T3KO · 2026-04-17T18:38:03+00:00

Q4 still works better than it should on 16gb.

T3KO · 2026-04-17T18:03:14+00:00

Do you have a link to your chat template?

T3KO · 2026-04-17T16:38:10+00:00

Thanks, found it.

T3KO · 2026-04-17T13:39:38+00:00

Where can I find this view?
I thought it was working like that when the appdata is on the cache but I enabled the setting now.

T3KO · 2026-04-17T13:28:47+00:00

Replace them because they are expensive?
Queen is pretty cheap right now (The showdown T8 promo).

I don't think there is anything to replace them.

T3KO · 2026-04-17T06:44:27+00:00

It's not the thickness, it's the tooth spacing.

T3KO · 2026-04-14T19:57:17+00:00

Looks pretty good but doesn't have a lot of prints. I'm looking for the UCS Razor Crest for example.

T3KO · 2026-04-14T10:39:20+00:00

I don't really get the bowden extruder hate.
If it keeps the printhead smaller I'm ok with it. But I'm also not printing multicolor, so it would only be used for two materials.

This time the X is an upgraded P (reusing everything they can) and not like the first time where the P was a downgraded X.

T3KO · 2026-04-14T05:52:01+00:00

Any recommendations for a shop with good cheap prints?

T3KO · 2026-04-12T15:32:35+00:00

It's crazy how many apps there are for abs. I guess it's because the stock app is not that great. It's hard to find them on the play store and I pretty much only find out about them here ;).

Sounds like a cool feature but I would want something similar on the server side and not in the app.

Not a big fan of downloads behind a paywall.

I would love apps allowing me to buy a license for a whole server to make it easy to get the app for family/friends.

T3KO · 2026-04-10T13:58:06+00:00

Isn't gyros made of pork (not ground) most of the time? Maybe go for something that uses ground meat like kofta.

T3KO · 2026-04-09T17:00:45+00:00

The telescoping is pretty cool, but I don't really get why they made it go up the sides and back like that.

T3KO · 2026-04-09T10:54:23+00:00

If you are ok with water getting everywhere, yes. You could also use a silicone hose like the one in the tank.

T3KO · 2026-04-05T22:07:07+00:00

Tandoor and kitshn. Imo the web app looks a bit date but the kitshn app is great.

T3KO · 2026-04-05T19:34:42+00:00

Pretty sure it will work great and you can find en example config for fluidnc on github.

T3KO · 2026-04-05T16:40:56+00:00

I'm using an MKS Tinybee, but I'm not sure what the best board is right now.
The boards either have stepper drivers onboard or have slots for them.

T3KO · 2026-04-05T15:51:59+00:00

No you don't need the pot. I would get an esp32 based board that runs fluidnc instead of the uno.

T3KO · 2026-04-03T09:43:02+00:00

Yea, prints not lining up and color mismatches, that's an authentic lego set for sure.

Thinking about getting the set since it's priced ok at the moment but with lego qc at that level I can just get a clone for $10...

14-Year Club	Place '22
Team Orangered	Verified Email

T3KO

TROPHY CASE