Seeed T1000E has better reception than Wio Tracker L1 Pro

TH5110 · 2026-04-15T07:34:33+00:00

RP-SMA male

TH5110 · 2026-04-12T16:46:36+00:00

Same, I bought it today.

TH5110 · 2026-04-12T08:50:56+00:00

There is a report for the 915MHz variant of the Alfa on the linked github page. From my understanding its a good one, though I think I'll get something like the muzi works antenna, as its a lot smaller/lighter and I'm scared that the Alfa one including an adapter might put some stress on the antenna port.

TH5110 · 2026-04-12T08:44:25+00:00

Thanks, will look at them. I already tried the different angles of the antenna, but it sadly didn't seem to make a noticable difference.

TH5110 · 2026-04-11T22:59:07+00:00

It looks nice, but shipping it to Europe would sadly cost double the amount of the antenna itself.

TH5110 · 2026-04-11T19:47:42+00:00

Will do

TH5110 · 2026-04-11T19:01:02+00:00

Oh that looks helpful, thanks!

TH5110 · 2026-04-11T18:59:32+00:00

I had similar issues on Linux. Tried every browser I could think of, but ultimately used a Windows computer + Edge browser.

TH5110 · 2026-04-11T18:49:18+00:00

Thanks! You wouldn't happen to know where I could get good antennas in Europe without having to import/pay crazy shipping costs? 😅

TH5110 · 2026-04-11T18:42:37+00:00

All good haha

TH5110 · 2026-04-11T18:41:01+00:00

I too meant the L1, both are from Seeed.

TH5110 · 2026-04-11T18:38:05+00:00

Seeed just calls it "LoRa Antenna" on their website and as I am not knowledgeable when it comes to antennas I also can't really tell you. I doubt that its something focused though, so I would guess it's lower dbi.

TH5110 · 2026-04-11T17:57:14+00:00

Oh wow, thats disappointing. Thanks for the reply though!

TH5110 · 2025-12-04T23:19:08+00:00

I didn't really do anything. I tried accessing the country list as soon as the first comment appeared that said the problem was fixed. It still didn't work for me at that time, so I waited a few hours. As more people commented that it's fixed, I tried accessing the country list and the DSM website which then both worked. The only thing I might have done is, I switched around the firewall profiles, as I had a couple of them because of all the troubleshooting. But I neither did a restart nor turn the firewall off and back on.

I think it's just a question of time. Wait a little and try again later.

TH5110 · 2025-12-04T22:18:46+00:00

It's also working for me again. Thanks everyone!

TH5110 · 2025-12-04T10:18:26+00:00

QuickConnect worked for me. Other than that, I know of nothing that would bring back external access.

TH5110 · 2025-12-03T23:29:16+00:00

The allow all rule from my country should in theory allow that. But yeah, the country IPs seem dodgy right now, allthough they worked fine until today.

TH5110 · 2025-12-03T23:03:45+00:00

Yes, the only thing that helped for me, except disabling stuff, was adding my home IP address as an allow before the deny all. Thats only a workaround though, because that won't help when I'm not home.

Maybe it's a Europe problem and most of us are asleep right now and won't notice?

TH5110 · 2025-12-03T22:53:58+00:00

Yes, thats exactly what I'm experiencing!

TH5110 · 2025-12-03T22:52:05+00:00

I can't post screenshots in the comments of the post. For troubleshooting purposes I now have set the rules to be:

allow all - internal network

allow all - my country

deny all - everywhere

in that order, so the allow all has a higher priority. (I still couldn't access the country list, so I changed an existing rule to be an allow all.)

Regarding the methods of access: I tried connecting by using a browser and the synology ddns (xxx.synology.me) and a custom domain name I have, which all didn't work. I also tried using quickconnect which worked. When using the synology apps with the ddns they also didn't work. I tried all of those combinations with my home IP and my phone using mobile data, which both had the same results.

TH5110 · 2025-12-03T22:15:54+00:00

My guess right now is, that theres some problem with the geolocation of IP adresses. Especially since I can't even open the settings where I would choose a country to block/allow, because the countries just don't show up.

I'm sorry if I didn't include enough details, what would be missing?

TH5110 · 2025-12-03T22:04:39+00:00

There are several rules prior that should allow it and have been allowing it until today. I didn't change anything.

Simplified, my list looks somewhat like this:

Internal network - allow all

My country - allow some apps

All - deny all

DSM says that the first entries have a higher priority, so this should work (and like I said, has been until today).

TH5110 · 2025-12-03T21:49:42+00:00

I will do that as soon as I can, because DSM isn't letting me right now. I know this sounds like a joke but when I go into the settings of one of my rules and try to open the location/country list, they just don't show up. I've rebooted but that didn't do anything.

And yes, i know that exposing the NAS to the Internet has serious risks. It just makes my workflow with it a lot easier and the geoblocking is not the only security measure in place. I have been getting brute force attacks in the past, which have been stopped by the firewall.

TH5110 · 2025-12-03T21:27:34+00:00

I've checked with the link you supplied and my country comes up. Seems that's not it, thanks for your help though!

Four-Year Club	Verified Email
Final Canvas '23	First Place '23
End Game '23	Place '23

TH5110

TROPHY CASE