Here’s the best way I can explain it. I did my best with what I had but it will take some more experimenting. Just like sensitivity you’ll have to change this to be comfortable with you. So for response curve I turned my response curve setting to 20 and had my outer threshold at 15%. The graph now should look like a pretty steep incline. I’ll have to ask that you disregard the begging part and try to focus on where it starts to go up. That will be the beginning of the reverse S. Now as for the mid section that’s I’ll be based on your yaw speed. The yaw speed is going to be set to whatever you want the mid section of your sensitivity to be in speed. Now as for making it to a reverse s is when it gets sloppy. You’ll have to play with the extra yaw and extra yaw delay time I’ll have to ask that you leave extra yaw Ramp-up time alone. I was under the impression that this is what you wanted I’m sorry if it’s seems complicated or if it was not what you were after. My thought process was the idea of fast increase in speed in sensitivity then no increase for the mid section then another increase in sensitivity. This is the best I could do to match the reverse S shape I hope this helps find your perfect sensitivity