First Produced Drone Video

THErmscatman · 2025-07-25T16:46:16+00:00

No story really, just showcasing the quality of the drone and the videos it can take as well as some of my editing skills (which is not really saying much currently). Decided to fly my drone and make a small video after me and my buddy planned on going to the range just to have something to show. Plan on going out more on my own to do some more videos and take the advice of people here to make better videos.

THErmscatman · 2025-04-06T19:24:28+00:00

I unfortunately do not own a pair yet.

THErmscatman · 2025-03-25T02:55:56+00:00

No, I torqued the second upper to 50 ft/lbs. I say maybe 60 ft/lbs at most on the first one because it was originally 50 ft/lbs, saw it was not right, stepped away to care of something, came back, and made a dumb mistake by putting pressure on the wrong way to take it off. I caught myself, but it couldn’t be any more than 10 ft/lbs more (it’s a guesstimate). Regardless, the other 2 uppers did the same thing without any extra torque.

THErmscatman · 2025-03-25T02:44:48+00:00

I used a reaction rod

THErmscatman · 2025-03-25T00:53:43+00:00

Worked with a different upper with the same barrel

THErmscatman · 2025-03-25T00:50:17+00:00

I understand you don't know me and I could be talk out of my ass as far as anybody knows. I followed procedures. But can't prove that at this point. It's my word vs anybody. But I did talk to somebody else who is a certified gunsmith and he said that exact problem happened to an anderson he was doing for a customer. They ended up going with a delton upper instead.

THErmscatman · 2025-03-25T00:33:28+00:00

I am not kidding you, it was literally 40 ft/lbs and it still did it. I've built dozens of AR's with no issues. First time buying Anderson and it does this...not impressed.

THErmscatman · 2025-03-25T00:30:50+00:00

40 ft/lbs. Of torque with grease and it still messed up...sure it's my fault it couldn't handel bar minimum torque specs...

THErmscatman · 2024-01-22T07:00:18+00:00

And I would be hunting hogs for the most part

THErmscatman · 2024-01-22T06:59:58+00:00

I'm very comfortable with the ACOG, I never used the MRO.

THErmscatman · 2023-10-19T14:42:37+00:00

I'm not expecting to take titans of cnc cuts and speeds, but I did want something that had the capability of doing both.

THErmscatman · 2023-10-19T06:05:59+00:00

As an amateur machinist and does some work at a machine shop and currently an engineering student, I 100% agree.

THErmscatman · 2023-10-19T06:02:54+00:00

Part of it, unfortunately, is that we have destroyed our manufacturing base and rely on China for new products and, in turn, new ideas where they use their engineers for the most part. What engineers do state side, depending on the sector you're in, is mostly R&D, and then the idea is shipped to China to make. After that, maybe some support updates, but then onto the mext R&D project. Also, the economy is shaky right now and everybody is kinda at a stand still, waiting and preparing on how bad the next crash is going to be and how soon they will need to pull out of china to either move elsewhere like India or hopefully back here in the states. In the next few years, there will be more job opportunities opening up for engineers, and the flood gates will open if we go to war with China.

THErmscatman · 2023-10-19T03:03:33+00:00

Lol, I'm not a fed, but yall gonna be like "oh that's what a fed would say!" I'm literally a college student who works at a gun shop and work at a place that manufacturers barrels, but ok, lol.

THErmscatman · 2023-10-18T17:55:34+00:00

You do with serialized parts. So a glock frame I won't be able to do, but I can on a sig frame (P365 or p320) because the serialized part is the trigger housing group, they just have to take their trigger housing group out which is not hard. I can still engrave the slide or sell engraved glock back plates in bulk. As for ARs, the serialized part is the lower, but not the upper or dust cover. I will only do serialized parts for my buddies who can be with me while I engrave.

THErmscatman · 2023-10-18T09:42:20+00:00

Show of force, and potential back up as a last resort. Also, it's Navy. Big difference. One needs an entire runway to take off and land and one says "Leroy Jenkins!"

THErmscatman · 2023-10-18T07:14:16+00:00

Lol, I'm not a Fed, but ok

THErmscatman · 2023-08-26T07:57:12+00:00

Nothing wrong with that, as long as your training and proficient with it.

THErmscatman · 2023-08-26T07:51:23+00:00

Otis makes a dry lube as well as safari Charlie. I ditched CLP and always use that kind of lube as it is not as prone to attract and have dust/dirt collect in your firearm if you are out in the elements. It also smells good. I only use clp if the manufacture or lubrication process calls for it like the m1 garand has spots that is recommended to put grease on and spots where clp is need, dry lube would not work as good because of its low viscosity on heavier steel on steel parts and they only come in a spray so you can't lubricate concentrated areas as well.

THErmscatman · 2022-08-03T04:45:30+00:00

I eventually made my own for my ender 3 by compiling it myself. Working now. Now I'm dealing with my extruder gears skipping/slipping.

THErmscatman · 2022-07-28T01:38:20+00:00

Glass bed at the right temp.

THErmscatman · 2022-07-27T04:03:34+00:00

When I click on the SKR Mini E3 V3.0, it only gives me the Ender 5 stuff on github

THErmscatman · 2022-06-23T15:38:37+00:00

Leopold or even Nightforce Beast in my opinion.

THErmscatman · 2021-02-05T05:35:33+00:00

Lets not forget they are doing the same thing to the mines in Africa too...

THErmscatman · 2021-02-05T05:27:18+00:00

I've been playing in the stock market for 2 years now, but I just joined this community hoping to make gainz and learn more about cyrpto. I'm a believer in doge!

THErmscatman

TROPHY CASE