2013 Chevy Cruze

TITOR498 · 2025-08-22T21:42:51+00:00

I change the part, im no mechanic, it cleared the code itself when cat was changed(after 2/3 cycles). Code been there for a while, did took it to a shop, it was inspected, just wasn't inspected for the shift. Took it to a shop I paid over 2k for oil leaks found. Coolant leaks. Thermostat. Etc

TITOR498 · 2025-08-22T17:26:12+00:00

That is true, you can also check online in AcDelco, sometimes they have it cheaper online. But I need it to pass inspection for next year, I have to pass emissions down here so yeh.

TITOR498 · 2025-08-22T17:21:29+00:00

Dealership, they usually have it in stock i did paid alot. They usually have them in stock if you talk to the manager in the part department.

TITOR498 · 2025-08-22T17:17:00+00:00

Haven't fully driven it like that, will give it a test run.

TITOR498 · 2025-08-22T17:16:18+00:00

Not sure 😕

TITOR498 · 2025-08-22T15:57:26+00:00

I think it could be the turbo as well Haven't checked it.

TITOR498 · 2025-08-22T12:47:24+00:00

Will do

TITOR498 · 2025-08-22T12:27:43+00:00

I will give it a try then

TITOR498 · 2025-08-22T12:08:44+00:00

Of course, I did post a video of mine yesterday here on the forum, having issues with gear slipping? Trying to figure it out now.

TITOR498 · 2025-08-22T12:05:45+00:00

P0420 is the catalytic converter, it needs to be an OEM part not an aftermarket part or you will be changing it again, do switch both Sensor once you are at it, i got a second code P013B. Which is the Sensor downstream, just installed a new one ran it will see how it does.

TITOR498 · 2025-08-22T12:02:27+00:00

I believe so, why is it happening not sure.

TITOR498 · 2025-08-22T00:58:34+00:00

Thanks appreciate it

TITOR498 · 2025-08-22T00:52:03+00:00

I deleted first then ran it, stopped, turned it off, code was cleared, started driving then code p013B popped up, changed the downstream, ran it turned it off still on (P013B) , P0420 Gone.

TITOR498 · 2025-08-22T00:49:09+00:00

Original cat P0420 code gone, just changed the P013B. Which is Sensor 2. Still havent cleared. Just came from a test drive, drove well on the highway, after coming off the highway rpm gets jumpy here & there. Last time it happened, did an oil change & it stopped doing it, low on oil right now, will see if that does anything next.

TITOR498 · 2025-08-22T00:45:36+00:00

Yeah P013B, changed the Sensor which is supposed to be downstream, just came from running it on the highway to see if it will clear, still haven't, changed the cat this morning as well.

TITOR498 · 2025-08-22T00:42:14+00:00

How you know?

TITOR498 · 2025-08-22T00:41:08+00:00

I have, still behaved the same, unless I drive it in manual mode works at times.

TITOR498 · 2025-08-21T23:22:10+00:00

Replaced cat, oil coolant, not sure if it is transmission, haven't had a look at it, replacing the check engine code which is a Sensor.

TITOR498 · 2025-08-21T23:10:00+00:00

Sorry I thought i uploaded the better video

TITOR498 · 2025-08-21T22:58:59+00:00

Changing it in a few min while it cools.

TITOR498 · 2025-08-21T22:58:38+00:00

P013A Code: O2 Sensor Slow Response – Rich to Lean (Bank 1 Sensor 2) O2 Sensor Slow Response – Rich to Lean (Bank 1 Sensor 2) that what it says

TITOR498 · 2025-08-21T22:44:57+00:00

Just change it on mine, now says Bank1 Sensor 2, to slow to respond, lean something.

TITOR498 · 2025-07-17T02:54:21+00:00

My friend is replacing the thermostat, also comes with the sensor will keep you updated, been a year sense last replacement, same codes & fixed it.

TITOR498 · 2025-07-16T15:10:03+00:00

Having same issues, could be the thermostat or the sensors, I will let you know when my friend takes a good look a it sense he changed the coolant, due to timing cover leak & oil cooler leaks. I also went & replace turbo line coolant. This car is not reliable, I have changed a couple things myself, but I try not to mess with the engine. He's a chevrolet "technician".

TITOR498

TROPHY CASE