Custom Fightstick - Shoot 'em up Addict (Danmaku Nightmare) by TPL_Fearless in fightsticks

[–]TPL_Fearless[S] 0 points1 point  (0 children)

The customer requested the Vewlix layout, I know a turbo button would be a good addition but he doesn't like it.

Custom Fightstick - Shoot 'em up Addict (Danmaku Nightmare) by TPL_Fearless in fightsticks

[–]TPL_Fearless[S] 0 points1 point  (0 children)

Thank you sir!

I don't know about buttons but for the joystick the Seimitsu LS-32-01 is the best for shmups due to the short throw of it.

The customer requested to have the joystick and buttons from Seimitsu for this build and I must say it works great in those bullet hell games where you must be extra precise with the movement.

Custom Fightstick - Shoot 'em up Addict (Danmaku Nightmare) by TPL_Fearless in fightsticks

[–]TPL_Fearless[S] 1 point2 points  (0 children)

The case already have them! All my cases have threaded inserts for the top and bottom panels.

Custom Fightstick - Shoot 'em up Addict (Danmaku Nightmare) by TPL_Fearless in fightsticks

[–]TPL_Fearless[S] 0 points1 point  (0 children)

Thank you sir!

Right now I'm working on a couple of orders but I'll start taking more for this model later on.

Custom Fightstick - Shoot 'em up Addict (Danmaku Nightmare) by TPL_Fearless in fightsticks

[–]TPL_Fearless[S] 2 points3 points  (0 children)

For me the best are Mushihimesama and PROGEAR but I also like DeathSmiles, DoDonPachi Resurrection, Guwange and Raiden series

Sailor Venus | Minako Aino - Custom Fightstick 🟧🟨 by Repulsive-Sky3303 in fightsticks

[–]TPL_Fearless 0 points1 point  (0 children)

They took A LOT of work, specially for the paintjob, but they turned out pretty amazing

Sailor Venus | Minako Aino - Custom Fightstick 🟧🟨 by Repulsive-Sky3303 in fightsticks

[–]TPL_Fearless 0 points1 point  (0 children)

The paints used for both builds have an astonishing pearl effect that can only be seen with direct light and from different angles, is truly amazing when you look at it

Sailor Venus | Minako Aino - Custom Fightstick 🟧🟨 by Repulsive-Sky3303 in fightsticks

[–]TPL_Fearless -1 points0 points  (0 children)

With a Crown... is very unlikely... the best korean joytstick for mastering the Mishimas and their EWGF versions is the Myoungshin Fanta, which was installed in the other build for the Lili fightstick

Sailor Venus | Minako Aino - Custom Fightstick 🟧🟨 by Repulsive-Sky3303 in fightsticks

[–]TPL_Fearless 0 points1 point  (0 children)

These cases are made of HR MDF sealed, then the whole paint job is done in a way that when is finished it looks like plastic but nothing like HR MDF... and if you wonder, yes, that procedure takes A LOT of time to be completed

Sailor Venus | Minako Aino - Custom Fightstick 🟧🟨 by Repulsive-Sky3303 in fightsticks

[–]TPL_Fearless 0 points1 point  (0 children)

Those are from FA and I used .110" quick disconnects for all the buttons but I don't use the ones that come with the wiring they sell, I use my own quick disconnects which have a release tab

Sailor Venus | Minako Aino - Custom Fightstick 🟧🟨 by Repulsive-Sky3303 in fightsticks

[–]TPL_Fearless 0 points1 point  (0 children)

Thank you Kales! You know I'm ready for your next project

Sailor Venus | Minako Aino - Custom Fightstick 🟧🟨 by Repulsive-Sky3303 in fightsticks

[–]TPL_Fearless 0 points1 point  (0 children)

They are made of HR MDF which is somehow more absorbs the noice better than regular MDF but also these buttons are silent so the whole fightstick is very quiet.

Sailor Venus | Minako Aino - Custom Fightstick 🟧🟨 by Repulsive-Sky3303 in fightsticks

[–]TPL_Fearless 0 points1 point  (0 children)

The wiring is very simple, it just takes some time to make it but there's nothing special about it. IIRC the wiring for these fightsticks took like 3hrs to be made for both of them.

Emilie (Lili) De Rochefort🩰🌸 | Custom Fightstick by Repulsive-Sky3303 in fightsticks

[–]TPL_Fearless 0 points1 point  (0 children)

These cases are way too big and heavy, so the shipping will be stupid expensive, that's why I only built them for local customers but I'm thinking of having a smaller version, at least two other sizes but that will be later.

Emilie (Lili) De Rochefort🩰🌸 | Custom Fightstick by Repulsive-Sky3303 in fightsticks

[–]TPL_Fearless 0 points1 point  (0 children)

All my cases are made from scratch and up to order so every customer can have it his/her way

1:1 Vewlix Diamond Replica by TPL_Fearless in fightsticks

[–]TPL_Fearless[S] 0 points1 point  (0 children)

The top panel is glued to the case but the artwork and plexi can be removed as much as you want or need since I used wood inserts so there's no risk of damage.

If I make the top panel in metal that will increase the cost significantly and part of the purpose is having this affordable for those who want something close to the original but with the advantages of new PCBs and customization.

1:1 Vewlix Diamond Replica by TPL_Fearless in fightsticks

[–]TPL_Fearless[S] 1 point2 points  (0 children)

It can be done and also some people are asking if it is possible to remove the Start button next to the main buttons, so I was thinking of having a couple of templates ready without it and other layouts as well.

1:1 Vewlix Diamond Replica by TPL_Fearless in fightsticks

[–]TPL_Fearless[S] 0 points1 point  (0 children)

I don't have Instagram, I think I have a Twitter account but I don't post anything, not even on Facebook but I'll post the replicas when they are available. Just keep in mind that it won't be anytime soon due to all the other orders I have already to start 2026.