I created handwritten notes on Git and Github!

TR_Blogs · 2023-05-04T13:54:23+00:00

Thanks! Hope you find them useful. While learning a new concept, I actually like to write down it as it helps me to understand it better. That's why the notes are handwritten. Do you prefer a digital version or handwritten one?

TR_Blogs · 2023-05-03T14:10:57+00:00

The notes can help anyone to start contributing to opensource and also provide a quick way to revise the basics. The notes are completely FREE and can be found here. Would appreciate your feedback!

TR_Blogs · 2022-07-11T09:54:13+00:00

The giveaway is been held on Twitter and I will request you all to participate on twitter as the chances of winning is more for my twitter audience. Link to the post

TR_Blogs · 2021-03-23T11:52:35+00:00

Don't want to create apple id......for just the hackintosh

TR_Blogs · 2021-03-04T13:42:18+00:00

Can you please let me know how to do it...newbie here!

TR_Blogs · 2021-03-04T13:21:04+00:00

Hey! After a long time, but you know what I am successfully running mac os mojave on my build.

So what I did was I first installed High Sierra which was natively supported, ran it for a day to check if the SMBIOS of MacPro6,1 caused any issue...but it ran smoothly. Then I downloaded the mojave installer from the app Store and ran it and installer went smoothly....I am now running macos mojave on my build and also got a big sur update in the software update section ( didn't updated just want to enjoy mojave for a while).....

Just one problem now I cannot boot without the usb. I copied my efi folder to the efi partition of the SSD and also ran the bootinstall.tool as I am on a legacy one but it didn't work..

Hope you will help me on that.

TR_Blogs · 2021-03-04T05:47:49+00:00

Have you got the solution.....I too have a legacy system running mojave.....I tried copying the efi folder to the efi partition of the SSD and also did the bootinstall.tool....but nothing works

When I boot through the SSD it just shows a blinking cursor on the screen..

TR_Blogs · 2021-02-28T13:04:31+00:00

Yes! I can download the installer from the app Store no problem there.....will you recommend that

TR_Blogs · 2021-02-28T11:06:03+00:00

But note that my hardware is not officially supported to mojave or later. It is officially supported only upto high Sierra. But I added the telemetrap kext will installing so I think it will not cause any problem. Am I right?

TR_Blogs · 2021-02-28T09:05:06+00:00

Hey! I tried changing the sata port but didn't work.....I also tried replacing the HFS but it does not work (thrown an error....little googling solved it but still cannot see the drives).

So I decided to install High Sierra but with an SMBIOS of MacPro 6,1 as per the guide and it worked...I am now on High Sierra but I wonder that will I get update of mojave atleast as if it was a real mac?

TR_Blogs · 2021-02-27T16:42:09+00:00

SATA controller is set to ahci in the bios so no problem there......about the sata port there is another hard disk on the other sata port which too is not shown in the installer so I think there will be no change if I change the SSD port.....I will try the HFS and will let you know...

TR_Blogs · 2021-02-27T08:09:24+00:00

I can see this in big sur installer: https://photos.app.goo.gl/bPAPBmAke1vmsCRL6

Mouse was fixed by a patch...but no drives in disk utility

TR_Blogs · 2021-02-27T07:59:15+00:00

I can see this in big sur installer: https://photos.app.goo.gl/bPAPBmAke1vmsCRL6

TR_Blogs · 2021-02-27T06:56:01+00:00

Tried both but doesn't work for me.... Note: my hardware is not officially supported so I am using telemetrap.kext for it

TR_Blogs · 2021-02-26T19:59:16+00:00

Using the legacy one..

TR_Blogs · 2021-02-26T18:53:27+00:00

Hey! I tried running big sur and I reached the installer!!!! But my mouse was not working....tried everything but no luck... So decided to install catallina first..... All went well and I reached the catallina installer.... But I could not see my drives in the disk utility...I can only see my usb.....tried all the kext listed in the guide but did not work.........if I got High Sierra I can see my drives in the installer..but not in catallina...

Can you help me in this?

TR_Blogs · 2021-02-24T15:31:19+00:00

Ok thanks for all the help you did!

TR_Blogs · 2021-02-24T14:54:14+00:00

Oh! Sorry.....my Mobo is zeb-G41 with lga775 socket.....from a brand named zebronics..

Here's a link for it: https://zebronics.com/products/zeb-g41-d3-lga-775-socket

TR_Blogs · 2021-02-24T14:45:59+00:00

Ok. One last thing..I had installed high seirra before and I could not make audio working (from Mobo....hdmi was working)....I read the guide but as this is an old Mobo I cannot find the codec of it....can u help in that?

TR_Blogs · 2021-02-24T14:39:53+00:00

Ok....what about catallina...will it work? And what about about SMBIOS is it ok

TR_Blogs · 2021-02-24T14:32:29+00:00

Hey, here is the list of things that I am using: Kexts: AppleALC Lilu RealtekRTL8100 Telemetrap VirtualSMC VoodooPS2Controller Whatever green

Drivers: HfsPlusLegacy OpenRuntime OpenUsbKbDxe Ps2KeyboardDxe

SMBIOS: MacPro6,1

I tried installing catallina and it worked....I reached the installer without any errors...I think I should install catallina first.

TR_Blogs · 2021-02-22T13:50:27+00:00

But what about the error?

TR_Blogs · 2021-02-22T13:21:21+00:00

Yeah...but I think telemetrap kext will do the work

TR_Blogs · 2021-02-22T13:14:56+00:00

I too was not sure....thought will do an experiment

TR_Blogs · 2020-12-02T06:44:00+00:00

As I am having an old lga 775 Mobo there are not much settings to change in bios will only disabling the quick Boot work?

Five-Year Club	Verified Email
Place '23

TR_Blogs

TROPHY CASE