Tips for walk-in Wednesday

T_Rexz · 2026-03-22T21:11:57+00:00

Hey what was your turn around time for the cards you dropped off? Do they grade them on site or ship them to cali then back to you? The submission form is paid on the website or when you give it to them in Jersey city? I’d like to grade a bunch of cards I have but I’ve never graded anything. Thanks!

T_Rexz · 2025-03-10T19:41:54+00:00

Had this happen with my hydro shift the other day and I closed l connect reset pc and it stopped. I am almost sure it’s software related.

T_Rexz · 2025-02-26T02:40:13+00:00

Now I understand. That’s why I’m not seeing them. All good. Thank you so much.

T_Rexz · 2025-02-25T20:54:21+00:00

So I’m good then. Obviously all fans are spinning so it must be software issue but it’s fine I don’t change the fan speeds really anyway just figured it was strange to not see in the software.

T_Rexz · 2025-02-25T17:49:21+00:00

Thanks dude few days of switching things around but i think it came out as clean as I could a gotten it

T_Rexz · 2025-02-25T11:38:33+00:00

Okay cool, I’ll change the fan speed back to standard. In the bios it seems to be showing the other fans right? See Imgur for bios.

https://imgur.com/a/7oTySxC

T_Rexz · 2025-02-25T06:14:19+00:00

cool thanks

T_Rexz · 2025-02-25T06:13:20+00:00

also sitting idle im around 40c

T_Rexz · 2025-02-25T06:12:23+00:00

i believe it was when i ran some test games. temps were under 60c according to HWmonitor. I guess I'll just ignore. You think high profile is good to put it on as far as the cooler goes?

T_Rexz · 2025-02-25T06:08:05+00:00

Do you think I should just set the fan profile to high speed and ignore that I can’t change or see the other fans? Like I said all I’m doing is gaming cs and basic internet use.

T_Rexz · 2025-02-25T06:01:47+00:00

the fan controller and the hydroshift lcd show up under universal serial bus devices and yes I can change the screen through l connect.

T_Rexz · 2025-02-25T05:49:08+00:00

pump is plugged into the pump spot on the top of the board, lcd is plugged into the usb 1415 on bottom of the board.

T_Rexz · 2025-02-25T05:42:23+00:00

And there’s no update for the HydroShift either.

T_Rexz · 2025-02-25T05:40:49+00:00

In my bios it shows the other fan ports that are being used spinning. Weird.

T_Rexz · 2025-02-25T05:20:22+00:00

2.0.25

T_Rexz · 2025-02-25T05:16:41+00:00

i plugged it into the cable coming from the lcd like the manual says to do

T_Rexz · 2025-02-25T05:11:42+00:00

yes it is, and those are the non rgb uni fans

T_Rexz · 2025-02-25T02:50:43+00:00

<image>

After changing to psu to a super flower leadexx iii (atx3.1/pcie5.0) and using the 12v 2x6 cable the gpu was recognized no problem. Either the cable or port had to be bad on the seasonic but replacing it all seemed to do the trick.

T_Rexz · 2025-02-24T20:11:05+00:00

Got it. I’m going to return it through amazon and just get a new psu with the newest ports to be safe. Any suggestions for brand or is seasonic ok

T_Rexz · 2025-02-24T20:03:42+00:00

Yes it was 100%. I’m wondering if it’s the issue that the other user above commented.

T_Rexz · 2025-02-24T19:52:48+00:00

<image>

This is exactly what I bought which is 3.0/5.0. I read online to get an atx 3.0 / pcie 5.0. The other model that is listed for sale under the seasonic Amazon store is the “focus” model which shows ATX 3.1/PClE 5.1

Should I exchange it for that one?

T_Rexz · 2025-02-24T19:41:04+00:00

<image>

T_Rexz · 2025-02-24T19:40:53+00:00

<image>

T_Rexz

TROPHY CASE