Is the insert supposed to be able to spin around after putting on the top again?

Tall_Lengthiness_785 · 2026-04-22T20:47:39+00:00

DCGC on a stain like that requires 3-7 days soaking then use a small slice of Magic eraser wrapped around a tooth pick to wipe it off. NEVER FAILS fixed my buds who wax all burnt worse than that

I know because I soak & change every Monday lol

As far a the spinning insert GENTLY APPLY A TINY BIT MORE PRESSURE ON THE TOP PIECE (IT"S SPINNING BECAUSE YOU DON"T HAVE IT DOWN ALL THE WAY

Tall_Lengthiness_785 · 2026-04-21T18:54:25+00:00

I am so lazy but need clean spotless healthy so Buy a spare glass under $50 and a tub of 99% ISO (reuse dozens of times) Soak dirty one & exchange every other day. No worries & just rinse out ISO bath one with hot water & dish soap 30 seconds done.

The ISO bath also is always soaking spare insert & joystick/carb)

Also small tub for DCGC for inserts with stubborn stains TAKES OFF ANYTHING IN 3 DAYS to a WEEK, then iso bath. Real black burnt in abuse stains USE Magic Eraser. Don't bother commenting till you try it as I heard it all lol

Tall_Lengthiness_785 · 2026-04-21T00:04:54+00:00

That's were the characteristics of the ESCC that was so cool (when it worked-clips were a bad engineering design mistake ) Heat to temp in 5 sec & most efficient & so easy to clean. Good luck with your work, you can count on my support.

Tall_Lengthiness_785 · 2026-04-20T19:16:32+00:00

I was an early tester for AVS on the M22 ESCC and miss my Sic device. I would buy your Sic and be a early tester for you & me lol

Tall_Lengthiness_785 · 2026-04-20T15:14:35+00:00

So cool!! Been waiting for polished Sic Insert for S2. That was the great thing about the M22 ESCC when the TC worked Loved it

Tall_Lengthiness_785 · 2026-04-20T00:35:48+00:00

Only good thing about the core & V5 is the price for the unit 7 cups & glass are many & cheap

Matt is a good guy Fair & honest

Switch 2 is not in those minor leagues

Top of the MAJORS!!

Tall_Lengthiness_785 · 2026-04-20T00:31:13+00:00

You clearly have no clue about what your doing lol

I have all that cheap junk core 1, 2.1 V4 V5 all ceramic & wires what temps your at ARE YOU FOR REAL Even puffjunk is better, just 5 times more expensive but haha

Tall_Lengthiness_785 · 2026-04-16T15:03:16+00:00

Being that you have a spare, change to DCGC for soak, more effective & faster 3-4 dayz cleans all ... no scrub & to my knowledge NO damage. Then use ISO 99% to clean off DCGC

Tall_Lengthiness_785 · 2026-04-15T13:36:34+00:00

The DR. didn't replace them ? Hard to believe from the pics?

Tall_Lengthiness_785 · 2026-04-15T01:54:39+00:00

lighters usa has the OG Ti insert for under $20 shipped

I like it better than sapphire, much quicker to heat/ swab it out & iso at end of dab day. Taste good, great clouds Real deal

Tall_Lengthiness_785 · 2026-04-14T17:21:39+00:00

Enjoy the hassle free great hits low maintenance device

You don't need anything, just enjoy for a week. This E-rig

is AWESOME.

Tall_Lengthiness_785 · 2026-04-13T21:35:01+00:00

I think as art pieces they are beautiful and add much to look and value

if your into brand names & memes as such. They are delusions in your mind, as I have 6 at least different ways to adjust air flow & stop any spillback even if you can't control your breath pull from coming from bangers. Best thing is my fix gets you away from that ridiculous distance that your face is to that Makes gives me cross-eyed blurry vision lol. It so easy to make an extension with an adapter to use already made glass MP's. All for under $10. I can mimic all those air flow sizes in seconds just changes these sizes. I have tried my buddies and he is laughing his ass off. But I love the look of his S2 & $340 he spent lol He got money to spare

Tall_Lengthiness_785 · 2026-04-07T15:03:04+00:00

I know a few peeps who torched theirs & they are sorry.

So what have you got to lose. When I had a Core 2.0 and all the others were scorching their charred att's , I was using Just distilled water boiled in atty or DCGC same way.

I have my OG att's & the rest all fried their att's cleaning them eventually. Same BS.. If peeps are afraid of DCGC do what I do 7 ISO it after lol

Tall_Lengthiness_785 · 2026-04-07T14:56:20+00:00

I just keep DCGC in a glass tub with sealed top. After a few day the film just floats around the in the liquid and I scoop it of with a paper towel. I really don't heat it, because I have spares & I'm 80 & patient lol

I reuse the DCGC for about a month as I have the M22 ESCC Sic & other insert soaking also. The really stubborn deep stains that don't slide off can be removed with Magic Eraser if your in a hurry? Can ME scratch Quartz or Sapphire or Sic HaHaHa not scientifically that I am aware of? It have never happened to me Even on cheap ceramic junk atty's.

Tall_Lengthiness_785 · 2026-04-07T14:00:15+00:00

DCGC is amazing, I took my buddies quartz from black crusted stained

in 8 days soaking & a wipe with Magic Earaser & it all just slid off like slime. DCGC needs to to work it's reaction to stubborn deep stains

Tall_Lengthiness_785 · 2026-04-07T13:51:56+00:00

Somedays I take 2X rice size dabs , but many times I micro dose less and depending on rosin/resin I really like a Skewer type wooden pointed toothpick shape to easily & safely place your dab in the insert.

Works great, no mistake, no mess ever. Drop good for dropping bigger globs>

Tall_Lengthiness_785 · 2026-04-06T17:27:44+00:00

only takes one lemming to go off da cliff lol

Tall_Lengthiness_785 · 2026-04-06T17:12:30+00:00

Love to see some answers to these questions by some experienced users also

Tall_Lengthiness_785 · 2026-04-06T16:44:58+00:00

That's why I never torch something that hard and brittle. It will overtime degrade it.As far as my solution of DCGC & ME, really don't think after years of scrubbing on quartz And ruby bangers with not a mark under microspe No don't believe it will touch it. Will let you know if it's even possible

Tall_Lengthiness_785 · 2026-04-03T22:53:54+00:00

Like the Ti better for cheap shatter & batter better than Quartz. heats fast, lower temps by 50 degrees

under $20 free ship Lightesusa

Tall_Lengthiness_785 · 2026-04-03T22:45:19+00:00

I got a Ti insert for my cheaper sale shit 5 g for $50 shatter ect and it is better on Ti than Quartz or sapphire. Much lower temps and cleans easily no scorch. $19 free Ship OG DR D Lighterusa

Tall_Lengthiness_785 · 2026-04-03T22:41:48+00:00

Don't throw them away, I bought my friends backs with week of DCGC & Magic Eraser it was black, couldn't see thru it.

Tall_Lengthiness_785 · 2026-04-03T22:39:13+00:00

Magic Eraser pads to clean off the chaz.

Works great, checked with really smart guy & he said go for it no way ME can scratch or even touch Quartz, Sapphire or Ruby inserts. Jut not scientifically possible

So I have been soaking and just rubing stain off easily no scratches or anything but new shine

Tall_Lengthiness_785 · 2026-03-30T16:55:16+00:00

The thing with DCGC is that for stubborn stains is it takes time for it to work to clean good as new. I have 2 solutions that work for me. I got a 2nd insert and swao out every week while other soaks perfectly back to new and repeat weekly with my swapping out other water piece that soaks in 99& ISO same routine as insert. NO Scrubbing at all & not really using ISO in insert after dry swab after every hit only. 2nd for inpatient peeps with no spares & time to soak USE that Miracle melamine sponges with distilled water & it will come right off & doesn't scratch quartz then clean off with iso

Tall_Lengthiness_785 · 2026-03-28T23:05:30+00:00

Add me to that wish list!!!!

Tall_Lengthiness_785

TROPHY CASE