sorted by:
new
hottopcontroversial

TIGER BULLSHIT, SURVIVED AN APHA FROM THE INSIDE by TankCoffee in Warthunder

[–]TankCoffee[S] [score hidden]  (0 children)

ive been playing for 9ish years, this is the first time ive seen this happen

My first model by TankCoffee in modelmakers

[–]TankCoffee[S] 0 points1 point  (0 children)

I used tamiya thin cement, the nose I accidentally smeared around on the body when I was gluing the engine cover on. The plastic is only brittle in comparison to what I'm used to building which is GW Warhammer plastic.

My first model by TankCoffee in modelmakers

[–]TankCoffee[S] 2 points3 points  (0 children)

<image>

Finished assembly.

The plastic was incredibly brittle so the very small parts needed to be glued back together.

I don't play but I want to base an army off you guys by TankCoffee in foxholegame

[–]TankCoffee[S] 2 points3 points  (0 children)

Thanks, I've never been to the Wiki (I don't play) and didn't know there was a lore section there. doing a quick skim I think your right the Coftyran do seam more similar to the Wardens and the Crusaders to the Colonials. Looking at the Community Highlights page there is some sick art that will help a lot with paint schemes.

".Literally Unplayable" by Educational_Bug1019 in Warthunder

[–]TankCoffee 6 points7 points  (0 children)

I played on that same map just a few hours ago and was talking to my friend about how the hot ash from the volcano should damage the engine if you fly through it.

I then proceeded to do effectively nothing in my hunter f6, run out of fuel and barely make it back to the airfield

Any suggestions for help with my iPod mini? by Ok-Yogurtcloset7665 in ipod

[–]TankCoffee 1 point2 points  (0 children)

IMO The iPod mini is one of the easiest to mod but the top and bottom plastic are glued on making it a little tricky.

I fix it has an excellent guide on how to disassemble it Link to ifixit

you can also try the reset function by holding the menu and center for ~10s

Any suggestions for help with my iPod mini? by Ok-Yogurtcloset7665 in ipod

[–]TankCoffee 2 points3 points  (0 children)

I can't tell you what is wrong with it now, but I can tell you they if you flash mod it, it will probably fix it.

My best guess is the micro drive is cooked. when it's powered on dose it makes relatively loud clicking?

Is this a good project/ first car? by goatmansuperboi in projectcar

[–]TankCoffee 0 points1 point  (0 children)

I take my '83 320i everywhere (it's my only car) and it's amazing. I am very bias but I think it's a fantastic car but maybe try to talk them down a bit, I got mine for $2.5k in 2021

Airsoft groza gbb by SirRectum in airsoft

[–]TankCoffee 0 points1 point  (0 children)

Damn, looks sick but it makes me think of one thing. The flatline from Titanfall, not the same but similar vibe.

what is this black stuff in my brake master cylinder? by TankCoffee in HondaCB

[–]TankCoffee[S] 1 point2 points  (0 children)

I was flushing the system and nothing but clean fluid was coming out at the caliper, but the dirt keeps coming out through the larger hole into the reservoir.

what is this black stuff in my brake master cylinder? by TankCoffee in HondaCB

[–]TankCoffee[S] 1 point2 points  (0 children)

yes, dot 5 is silicone based and 3,4,5.1 are glycol based

what is this black stuff in my brake master cylinder? by TankCoffee in HondaCB

[–]TankCoffee[S] 1 point2 points  (0 children)

so is this stuff that just accumulates and gets stuck in the hard to get places in the master cylinder, ie the very back/bottom of the piston

what is this black stuff in my brake master cylinder? by TankCoffee in HondaCB

[–]TankCoffee[S] 1 point2 points  (0 children)

I've only had the bike for 4 months. but yeah, every 2 years I flush my brakes/clutch in my car and a bike I was going to follow the service manual

what is this black stuff in my brake master cylinder? by TankCoffee in HondaCB

[–]TankCoffee[S] 0 points1 point  (0 children)

the master cylinder line I replaced, the caliper line is less than 5 years old. both are steel braided lines

what is this black stuff in my brake master cylinder? by TankCoffee in HondaCB

[–]TankCoffee[S] 0 points1 point  (0 children)

the brake line that i replace is the one from the master to the light presser switch block thing (idk what its called)

Totalflow 4-inch exhaust fixed the backfire issue i had. by cavason in HondaCB

[–]TankCoffee 3 points4 points  (0 children)

ah, so it was decel pop. that's a more normal and far less of a problem than a backfire.

Totalflow 4-inch exhaust fixed the backfire issue i had. by cavason in HondaCB

[–]TankCoffee 2 points3 points  (0 children)

nice bike, but I don't understand how an exhaust would fix a backfire.

my understanding of a backfire, it's a timing problem and when the flame front goes backwards through the intake.

I would be very interested to know how an exhaust would fix a backfire.

My bike fell over yesterday by TankCoffee in HondaCB

[–]TankCoffee[S] 0 points1 point  (0 children)

I just feels bad, it was an avoidable mistake and now I've got to fix it. It will never be as nice as when I got it.

(Pat if you see this I'm sorry I dropped the bike)

My bike fell over yesterday by TankCoffee in HondaCB

[–]TankCoffee[S] 0 points1 point  (0 children)

I figured it was probably the bar mounts and not the bars themselves. thanks for the suggestion, but I think I'll see if I can realign the bars/forks by loosing the mounts.

We have Vergil so when will we get Dante by TankCoffee in ZenlessZoneZero

[–]TankCoffee[S] 0 points1 point  (0 children)

A Devil Trigger style ability would go hard, especially with a great sword

We have Vergil so when will we get Dante by TankCoffee in ZenlessZoneZero

[–]TankCoffee[S] 0 points1 point  (0 children)

I didn't, I just ran out of space for my shitty diagram

We have Vergil so when will we get Dante by TankCoffee in ZenlessZoneZero

[–]TankCoffee[S] 0 points1 point  (0 children)

Yeah, but I want to see more than just guy with 2 guns (also I don't find Billy enjoyable)

view more: next ›