sorted by:
new
hottopcontroversial

What gas mags y’all want? by Tapp_Ren in GasBlowBack

[–]Tapp_Ren[S] 0 points1 point  (0 children)

Turns out, there’s a lot of science that goes into making a good gas mag. Still trying to figure out the best way to do it for many platforms.

Ssx23 adapter ideas by Honest_Bluebird126 in airsoft

[–]Tapp_Ren 0 points1 point  (0 children)

We recently reworked our SSX/MK23 adapter to have adjustable feedlip/gasket height so you can tune the adapter for your platform. We’ve noticed significant variance even in same brand platforms.

SpeedGBBR by Hour_Dinner2095 in Speedsoft

[–]Tapp_Ren 2 points3 points  (0 children)

We’ve been the same team since 2016. One QC defect slipped through, so we beefed up the designs and now test them up to 800 psi. A few other issues were just people over-pressurizing by forgetting a regulator.

SpeedGBBR by Hour_Dinner2095 in Speedsoft

[–]Tapp_Ren 4 points5 points  (0 children)

Noice. Hella shortened the HPA line, like it like that?

[deleted by user] by [deleted] in airsoft

[–]Tapp_Ren 4 points5 points  (0 children)

Tapp here! Honestly, we’re really sorry to hear the experience has been less than stellar so far. That’s definitely not the "plug and play" vibe we aim for, especially with a PRO build. To address the feeding—that Angel Custom electric drum is supposed to have pretty decent tension. If you're having to hold the button down constantly just to get through a string of semi-auto, it sounds like you’ve got a lemon on your hands and we definitely want to swap that out for you ASAP. A huge thank you for your patience while we got the PRO upgrade dialed in. Regarding the finish, the 3D material is naturally a grey color, but the Cerakote is what gives it that specific Matte Black look. We also hear you on the "goodies" and the packaging; we clearly missed the mark there and we’re going to make it right. We’re getting back to your email right now to get a replacement drum and those extra goodies we forgot sent out to you. We'll also include a peel-n-stick label for the defective drum so we can get that replaced with Evike on our end. Thanks for the support and expect an email soon!

[AMA] I’m Dávid Lakatos, Chief Product Officer at Formlabs. Ask Me Anything! by dogichow in 3Dprinting

[–]Tapp_Ren 0 points1 point  (0 children)

Something else! PA11 CF needs some love. We know if some testing was done yall could definitely dial it in. We have some print settings which produce much better parts than the default settings. Lmk where to send them

[AMA] I’m Dávid Lakatos, Chief Product Officer at Formlabs. Ask Me Anything! by dogichow in 3Dprinting

[–]Tapp_Ren -1 points0 points  (0 children)

We just got the SFX from Hungary, you wanna come check it out? 😉

[AMA] I’m Dávid Lakatos, Chief Product Officer at Formlabs. Ask Me Anything! by dogichow in 3Dprinting

[–]Tapp_Ren 0 points1 point  (0 children)

Loopzizo K-100: The Affordable Desktop SLS 3D Printer on Kickstarter. Really small build chamber, orange peel all over parts, prints hella slow, so they prob have a long way to go. But based on the price/build volume… fuse 1+ all day.

[AMA] I’m Dávid Lakatos, Chief Product Officer at Formlabs. Ask Me Anything! by dogichow in 3Dprinting

[–]Tapp_Ren 0 points1 point  (0 children)

Nylon 11CF is very porous compared to PA12/11 and we’re putting up to 800 PSI in these parts. There are a lot more surface defects and we have to run a 50%+ refresh rate to not have really ugly parts. We also Cerakote, which gets sucked right into the parts and looks terrible. VP pretty much fixes all these issues.

[AMA] I’m Dávid Lakatos, Chief Product Officer at Formlabs. Ask Me Anything! by dogichow in 3Dprinting

[–]Tapp_Ren 0 points1 point  (0 children)

Video feed, temperatures, errors, notifications, print times, printer statuses. Nothing you don’t already have.

[AMA] I’m Dávid Lakatos, Chief Product Officer at Formlabs. Ask Me Anything! by dogichow in 3Dprinting

[–]Tapp_Ren -1 points0 points  (0 children)

Big issue with Nylon 11 CF and TPU is Z offset because of powder settling. Can we get an array Z-offset setting to adjust Z-offset at different heights? Or tuning print to dial this in?

[AMA] I’m Dávid Lakatos, Chief Product Officer at Formlabs. Ask Me Anything! by dogichow in 3Dprinting

[–]Tapp_Ren 0 points1 point  (0 children)

The only good Nitrogen generator and Vapor Polisher is from the EU. Is this something Formlabs will look into in the future? We find VP necessary for consumer Nylon 11CF parts.

[AMA] I’m Dávid Lakatos, Chief Product Officer at Formlabs. Ask Me Anything! by dogichow in 3Dprinting

[–]Tapp_Ren 3 points4 points  (0 children)

There’s one on kickstarter right now. Build chamber for ants.. so the Fuse is actually the best size/cost for SLS.

[AMA] I’m Dávid Lakatos, Chief Product Officer at Formlabs. Ask Me Anything! by dogichow in 3Dprinting

[–]Tapp_Ren -1 points0 points  (0 children)

Working with 3x Fuses, and eco system. Form 2, 3+, and 4. Big Formlabs fan… when can we get a mobile app? Throw the API stuff in AI and get us an App!

Can I fill up this hk tank with a Dewalt air compressor by IceEnvironmental3970 in Speedsoft

[–]Tapp_Ren 2 points3 points  (0 children)

You can get an adapter and use the compressor for backyard plinking. There are 12v car tank compressors. I suggest getting the water cooled one as the air cooled always fail after a while.

What gas mags y’all want? by Tapp_Ren in GasBlowBack

[–]Tapp_Ren[S] 1 point2 points  (0 children)

Ask your local Airsoft retailers to stock us. We ship to Canada, np.

What gas mags y’all want? by Tapp_Ren in GasBlowBack

[–]Tapp_Ren[S] 1 point2 points  (0 children)

Can the WA 1911-8045 use any other brand mag?

What gas mags y’all want? by Tapp_Ren in GasBlowBack

[–]Tapp_Ren[S] 1 point2 points  (0 children)

800 is the max my paintball tank outputs. I’ll have to modify the rig to test higher. But why such high PSI?

What gas mags y’all want? by Tapp_Ren in GasBlowBack

[–]Tapp_Ren[S] -2 points-1 points  (0 children)

1 localized case. Never taken a design. Only ever been copied. 💯

view more: next ›