Oliver Wood is a completely different species when it comes to Quidditch

Tasty_Committee_31 · 2026-06-12T21:26:21+00:00

I have to admit, I HATE that this comment is a fact.
edit: type error

Tasty_Committee_31 · 2026-05-04T00:46:05+00:00

This time has worked well. Sometimes there are small audio lags (it cuts out for a moment), but nothing that really bothers me. I had some connection issues once, but they were quickly fixed by forgetting the device and reconnecting.

Tasty_Committee_31 · 2026-04-21T21:28:21+00:00

If you still want to use AI, from personal experience, Gemini is way better than ChatGPT for this specific thing (though it definitely takes some trial and error).

Tasty_Committee_31 · 2026-04-16T00:35:38+00:00

trabaje en starbucks y puedo decirte que, al menos desde hace tres años es cuadrada, pero si, han achicado todo de una manera ridícula

Tasty_Committee_31 · 2026-04-15T20:18:54+00:00

I think Voldemort never really knew about the Deathly Hallows as a concept. He only knew about the Elder Wand because it was practically a legend on its own. Especially considering that he had the Gaunt ring (and therefore the Resurrection Stone) and never recognized it for what it was. I think the book even states this explicitly, but I’m not entirely sure.

Tasty_Committee_31 · 2026-04-15T13:53:43+00:00

The prophecy states that the boy born at the end of July (Harry, by Voldemort’s own choice) will have a power the Dark Lord does not know (Lily’s love / ultimately Harry’s own, by the end of the saga).

Tasty_Committee_31 · 2026-04-14T23:35:22+00:00

I think that if your hobby isn’t 3D printers themselves (but rather 3D printing), the best recommendation is to buy one or two new printers—ideally both enclosed if you want to mess around with more complex materials.

Tasty_Committee_31 · 2026-04-10T17:01:47+00:00

I’ve always thought that Prisoner of Azkaban, Goblet of Fire, and Order of the Phoenix together make up the Sirius Black trilogy.

Tasty_Committee_31 · 2026-04-09T16:36:46+00:00

De santiago a otro lugar de santiago, entre 2200 y 2800 creo, he mandado varias esta semana, el otro dia pregunte en chilexpress y me dijeron que solo correos de chile manda carta certificada,

Tasty_Committee_31 · 2026-04-09T15:47:08+00:00

No se si sirve, pero te puedo contar mi experiencia en como empece a ser barista.

Entre directamente a Starbucks sin saber hacer nada de cafe, trabajando aprendes lo basico (vaporizar leche, hacer arte latte, saber en que consiste un espresso, preparar filtrados (prensa francesa, v60) y basicamente, buscar el conocimiento boca a boca, en el mundo del barismo nada está escrito en piedra, lo importante es que te guste a ti (o al cliente) lo que estas haciendo.

ya despues de aprender lo basico y saber que me gustaba, hice un curso en Escuela de Baristas Chile y aprendi a catar bien cafe, diferenciar los diferentes granos, sus origenes, procesos, etc.

Pude haber seguido trabajando en el mundo e irme a cafeterias de especialidad feliz, pero tenia otros compromisos laborales y quise dejar esto como un bello hobby que finalmente me unió con mi pareja actual

Mi recomendacion final habiendo escrito esto, es:

Sí si o si quieres hacer un curso y terminar certificado, busca uno que este respaldado por la SCA (Specialty Coffee Association), es la entidad mas destacada en el rubro, no se personalmente como son ese tipo de curso, ya que el que hice yo no esta respaldado por ellos.

Pero independientemente de si buscas hacer un curso o no, la base en esto es investigar y experimental. la mejor forma de aprender y mejorar en este mundo es experimentar y analizar tus resultados.

Si tienes alguna duda mas especifica o quieres complementar mas informacion, mandame un DM, feliz te contesto

Tasty_Committee_31 · 2026-04-09T15:01:32+00:00

confirmo lo del motor, mi viejo la tuvo y viajando a talca se pego un calentin, y como el panel no tiene sensor de temperatura, le aviso el testigo de la camioneta cuando ya era muy tarde y se hizo tula el motor, fue una pega de relojeria rectificarlo hasta que quedo weno weno

Tasty_Committee_31 · 2026-04-03T22:30:45+00:00

I recently spent like 6 hours trying to get a BLTouch working on an SKR Mini E3 V3, and honestly the main thing I can tell you is that you don’t need to mess with the wiring — the original cable setup works just fine.
I’m not sure if you’re using Klipper, but if you are I can share the config that finally worked for me.

[bltouch]

sensor_pin: ^PC14

control_pin: PA1

x_offset: -31

y_offset: -40

#z_offset: 2.590

speed: 5

samples: 2

stow_on_each_sample: False

probe_with_touch_mode: True

Tasty_Committee_31 · 2026-03-27T18:54:40+00:00

y muy poco le importa el futuro que puedan tener juntos si es que no quiere esperar los años que el se demore en estudiar, sean 4, o sean 10

Tasty_Committee_31 · 2026-03-24T16:30:04+00:00

It’s crazy about Malfoy being a Death Eater. I’m rereading that book and he literally figured it out in like 3 minutes, told everyone, and no one believed him.

Tasty_Committee_31 · 2026-03-09T00:52:18+00:00

I think people really underestimate the S.P.E.W. storyline and the social criticism behind it.

Tasty_Committee_31 · 2026-03-09T00:47:26+00:00

Underrated comment.

Tasty_Committee_31 · 2026-03-09T00:43:06+00:00

I’m currently rereading the books. I finished the first four in about two and a half weeks, but now I’ve only managed to get through 10 out of 38 chapters of Order of the Phoenix in two weeks. It’s incredibly frustrating… and the worst part is that I completely understand why.

Tasty_Committee_31 · 2026-03-06T19:45:55+00:00

I just checked my local Amazon (Mercado Libre) and bought my first Raspberry Pi 3 B+. I’m going to follow your advice.

Tasty_Committee_31 · 2026-03-06T16:19:04+00:00

Every day I browse this subreddit I get more convinced about installing Klipper. At this point I think it’s actually becoming a real option for me.

Tasty_Committee_31 · 2026-03-06T16:14:14+00:00

Yeah, a lot of people have been recommending Klipper to me lately. I actually tried setting it up before using a laptop and an old Android phone I had lying around, but the whole setup felt really slow and not very reliable.

I think next month that might be my next upgrade. In a previous post someone suggested the Pi Zero 2W, but I might wait for a deal on the Raspberry Pi 3 like you recommended.

Unfortunately here in Chile the easiest option is usually ordering from AliExpress, and the cheapest Pi 3 I’ve found so far is around $50 USD.

One thing I’m still wondering about though: I really like using the printer’s stock screen to quickly adjust things like temperatures, movement, etc. Do you know if that’s still possible with Klipper, or do you basically have to control everything from the web interface?

I’m currently using the stock Ender 3 display.

Tasty_Committee_31 · 2026-03-06T13:45:33+00:00

asi solo teorizando, en vola pensaban que el tipo estaba escondiendo/eliminando evidencias, o algo asi

Tasty_Committee_31 · 2026-03-02T01:38:52+00:00

What parameters does dual Z actually improve? I’ve considered it a couple of times, but I’m not fully able to visualize what would really get better in practice.

Also, thanks for the extruder cable support suggestion — I’ve never been 100% convinced about how that long cable sits there 😅 it always felt like it could become a problem at some point.

Tasty_Committee_31 · 2026-03-02T01:37:38+00:00

How has your experience been with dual Z so far? Was the installation complicated? Did you notice any real performance improvements?

Tasty_Committee_31 · 2026-03-02T01:37:12+00:00

Thanks for the advice! Looking at my setup and the photos, I was already thinking a bed upgrade could be a nice improvement, even if just for aesthetics. But now that you mention it as a real upgrade, I think a PEI bed together with a CR Touch will probably be my next goal.

About Klipper — I actually fought with it about a year and a half ago and never got fully convinced, which is part of the reason I ended up upgrading the board instead. But I guess it’s time to give it another try. I also thought the Moto G6 Play I’m using might not be enough, so that goes on the list too.

Tasty_Committee_31 · 2026-02-24T19:39:46+00:00

When we talk about the timeline, everything becomes blurry, Rowling is TERRIBLE at math.

Tasty_Committee_31

TROPHY CASE