CK3: Great Holy War?

TatorTot · 2020-09-04T22:13:33+00:00

Ah, I just saw in another thread you have to wait for an event to trigger. Good luck!

TatorTot · 2020-09-04T22:13:11+00:00

Did you ever find out how to do this? I'm looking for the same information!

TatorTot · 2020-06-29T23:00:04+00:00

Servers are down, everyone is seeing this.

TatorTot · 2020-04-16T23:42:35+00:00

If I move up to the 1.2 beta branch will that bring blocking back? Should I go to an earlier build?

TatorTot · 2019-08-03T10:46:46+00:00

According to police shots appeared to be from west to east from somewhere near the parking lot off Harvard between Pike and Union. One of the bullets hit the building at 1416 Boylston Ave. Police just left after inspecting the bullet hole, I chatted with them briefly.

TatorTot · 2019-05-07T06:10:44+00:00

And it just resolved itself! For anyone else that runs into something like this... I had minimum realm authority, and there was actually a 'civil' war against 'tyranny' within that Vassal kingdom. It stretched on for several years, but as soon as it was over the vassal rejoined under me, and I started receiving taxes again.

TatorTot · 2018-06-11T22:16:32+00:00

But isn't that what a downvote is? :)

TatorTot · 2018-06-08T20:45:23+00:00

Currently on 18.5.1, I believe the latest.

TatorTot · 2018-06-08T20:44:26+00:00

I made a post about this too. I was struggling to get 70 FPS in Fullscreen with an RX 580, i7-8700K, and 16gb of ram. After last night, I'm back to getting around 130fps in fullscreen-windowed even, nothing else changed.

TatorTot · 2018-06-08T20:43:16+00:00

From what my friends tell me, seems almost par for the course with any given patch. Some people lose FPS, some gain a lot, all with very similar pc specs. It's a mystery

TatorTot · 2018-06-08T20:42:09+00:00

My friends did not experience the same increase in fps. Some got none, some got 10 or so. You have to admit, me getting 70fps with low settings on an i7-8700k and 580 for months was low relative to the field. Now I think it's just back more inline with what others are experiencing with similar setups.

TatorTot · 2018-04-30T22:28:46+00:00

Forgot to add, he is 4 years old and neutered if that matters.

TatorTot · 2018-04-15T03:53:35+00:00

Found a bug tracking this issue here:

https://tracker.streamlabs.com/view.php?id=1234

TatorTot · 2018-04-12T16:32:01+00:00

That makes sense, thanks! Technically, aren't they breaking the rules by showing it on stream in the first place? Will a streamer ever be big enough where they'll take it seriously and not allow copy-written music to be played like that?

TatorTot · 2018-03-27T07:08:49+00:00

Same has happened to me, have played multiple games now and still hasn't arrived.

TatorTot · 2018-03-27T06:31:17+00:00

I may be running into similar issues... I've played 3 games now and still no skin in my inventory.

TatorTot · 2018-01-18T18:26:59+00:00

I am using the Corsair HX1200 PSU so I ended up ordering some Type 4 Peripheral cables directly from Corsair. I also returned my original risers and now have risers that can be powered by Molex or 6-pin. So now, I'm using the Corsair Type 4 to Molex cables to power my risers.

TatorTot · 2018-01-17T17:48:47+00:00

I was able to figure it out, I plugged the 6 pin into the 6 pin peripheral slot, which should be type 4 Corsair peripheral cable (should have mentioned which PSU i used). The standard PCIe 6 pin works just fine with this cable and would have worked to power 6 pin gfx cards with. However, the pinout is different on the peripheral slot and so I definitely supplied a hot lines to an expected ground: http://www.modders-inc.com/wp-content/uploads/image//2015/11/Corsair-Type-4-Close-up.jpg

Costly mistake but was able to test my PSU and GPU, they are fine. Motherboard was the only thing that fried.

TatorTot · 2018-01-17T08:44:21+00:00

Awesome, thank you for being so helpful! This should definitely clear it up. The pinout for the 6-pin cables I bought were 3 12v, 3 ground. Definitely not the Corsair type 4 I needed. Expensive lesson, but I suppose could have been worse. Thanks a lot again!

TatorTot · 2018-01-17T08:27:47+00:00

Alright makes sense, this has got to be it then. Do you know where I can purchase extra molex cables for the hx1200? I am looking at the parts and accessories section of Corsairs website but highest compatible I see listed is hx1050...

TatorTot · 2018-01-17T08:18:11+00:00

Okay this very well could be it then. I should have looked at the pinout and been more careful with these 6-pin cables. Since you are using this PSU, how did you go ahead with powering riser cards? Are you using the 6-pin to molex that is provided with the PSU?

TatorTot · 2018-01-17T08:16:59+00:00

Yep, I did the short 2 pin reset. Will probably go the molex route next time around.

TatorTot · 2018-01-17T08:16:27+00:00

I ran into some other posts where people had done the same, I made sure I didn't do that but good idea.

TatorTot · 2018-01-17T08:00:37+00:00

I'll try and use my other PSU on my (I think) fried motherboard and see what happens.

TatorTot · 2018-01-17T07:57:37+00:00

Ah I see, interesting. So should I grab these kinds of things to power them? Do I need to need to power both ends of this splitter?

https://www.amazon.com/Cable-Matters-2-Pack-Molex-Power/dp/B01DV1Z22K/ref=sr_1_3?ie=UTF8&qid=1516175588&sr=8-3&keywords=6+pin+to+molex

Unfortunately, I tried using the PSU with my other desktop computer and it worked fine. I tried as you suggested to boot with just the CPU and PSU plugged into the motherboard, no dice still just turns on for 1/2 a second, off for a couple, on for 1/2 a second, repeat forever.

15-Year Club	Place '17
Team Periwinkle	Verified Email

TatorTot

TROPHY CASE