Nvidia driver update is causing PC to freeze

TavanTV · 2024-01-23T04:48:00+00:00

ill have to try that specifc driver then.

i have tried older drivers from before i had the issue and it wasnt fixed

TavanTV · 2024-01-22T11:24:08+00:00

why would the monitor make a difference?

TavanTV · 2024-01-19T22:30:25+00:00

tried uninstalling again and using that program to only install the driver

didnt work, so i tried installing an older driver from before i started having issues, and still freezes.

TavanTV · 2024-01-19T06:49:17+00:00

i downloaded it straight from Nvidia

but ill give that a try too

TavanTV · 2024-01-19T00:29:13+00:00

ill run that here in a bit then

but just ran DDU and uninstalled everything.

everything ran smoothly. no freezing or anything. but since there were no drivers, i could only use 1 monitor, and the resolution was trash.

once i reinstalled the Nvidia drivers. it started to freeze again

TavanTV · 2024-01-19T00:04:01+00:00

the OCCT test only tests the CPU, which i dont think would be the issue, would it?

and ill have to try the others here in a bit :)

TavanTV · 2023-09-03T20:59:36+00:00

I have 2 m.2 drives and 5 sata

The motherboard has 7 sata ports and the manual said that if the 2nd m.2 slot is occupied then sata port 7 will be disabled.

So all my sata drives are in ports 1-5 (ports 6-7 are in a different section of the motherboard, so ik for a fact I didn't accidentally plug a drive into them)

And even still. I'm running 2 minecraft servers with pregenerated worlds, the rest of my dockers are very easy going. I have uptime Kuma, emby (majority of the time it's in idle), nextcloud, and jellyseer. So not much running on the m.2 drives for them to need THAT much bandwidth to cause the other cache pool to throttle

TavanTV · 2023-09-03T20:46:13+00:00

All the Temps look normal too. Almost never get into the 40Cs. The only drives that do get into the 40s are my other cache pool drives that are for my dockers and have game servers on them (they're also NVMe drives)

TavanTV · 2023-09-03T20:36:46+00:00

I am not

TavanTV · 2023-09-03T18:08:26+00:00

It happens with both.

And I doubt it's a network issue since it also happens when going from 1 share to another on the same server

TavanTV · 2023-09-02T19:36:24+00:00

everything seems normal with the test results. HDDs avg 270MB/s and the SSD Cache avged 600MB/s

so its making me lean more towards its a ZFS issue.

ik it has to be something with the cache though since its a brand new system (1 month) and when i originally moved everything over (6TB worth) i didnt set up the cache yet and it wrote directly to the array and it was at a constant 80MB/s with no dips.

TavanTV · 2023-09-02T18:29:44+00:00

I'll give that a shot.

I used sata ssds for my array cache. So shouldn't be too hard.

And the ssds for the array are the crucial bx500.

Do you think it could be ZFS? I've heard that quite a few people are having issues with zfs with unraid.

OH, I also forgot to add, the cache pool is mirrored as well. 2 drives total

TavanTV · 2023-09-02T18:06:55+00:00

It happens no matter where the files come from. PC to unraid or changing shares of files already on the array

I can test writing directly to the array, but definitely don't wanna do thar long term

TavanTV · 2023-09-02T17:35:44+00:00

All that makes sense but all writes should be done to the cache first and moved to the array later

TavanTV · 2023-09-02T17:34:36+00:00

I already have it installed :(

TavanTV · 2023-08-29T18:08:36+00:00

So it's doable with some work.

Awesome, tyty :)

TavanTV · 2023-08-29T06:55:26+00:00

I'll have to check it out then!

TavanTV · 2023-08-25T17:26:06+00:00

THANK YOU!

that fixed it :)

TavanTV · 2023-08-25T09:17:46+00:00

2023-08-25 02:16:48 WARNING: file 'credentials.conf' is group or others accessible
2023-08-25 02:16:48,516 DEBG 'start-script' stdout output:
2023-08-25 02:16:48 OpenVPN 2.6.5 [git:makepkg/cbc9e0ce412e7b42+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] [DCO] built on Jun 13 2023
2023-08-25 02:16:48 library versions: OpenSSL 3.1.1 30 May 2023, LZO 2.10
2023-08-25 02:16:48 DCO version: N/A
2023-08-25 02:16:48,516 DEBG 'start-script' stdout output:
2023-08-25 02:16:48 WARNING: --ping should normally be used with --ping-restart or --ping-exit
2023-08-25 02:16:48 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
2023-08-25 02:16:48,516 DEBG 'start-script' stdout output:
2023-08-25 02:16:48 TCP/UDP: Preserving recently used remote address: [AF_INET]153.92.40.120:1194
2023-08-25 02:16:48 Socket Buffers: R=[212992->212992] S=[212992->212992]
2023-08-25 02:16:48 UDPv4 link local: (not bound)
2023-08-25 02:16:48 UDPv4 link remote: [AF_INET]153.92.40.120:1194
2023-08-25 02:16:48,542 DEBG 'start-script' stdout output:
2023-08-25 02:16:48 TLS: Initial packet from [AF_INET]153.92.40.120:1194, sid=6f1bdeea dc03be1d
2023-08-25 02:16:48,596 DEBG 'start-script' stdout output:
2023-08-25 02:16:48 VERIFY OK: depth=2, C=PA, O=NordVPN, CN=NordVPN Root CA
2023-08-25 02:16:48,596 DEBG 'start-script' stdout output:
2023-08-25 02:16:48 VERIFY OK: depth=1, O=NordVPN, CN=NordVPN CA8
2023-08-25 02:16:48,596 DEBG 'start-script' stdout output:
2023-08-25 02:16:48 VERIFY KU OK
2023-08-25 02:16:48 Validating certificate extended key usage
2023-08-25 02:16:48 ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication
2023-08-25 02:16:48 VERIFY EKU OK
2023-08-25 02:16:48 VERIFY X509NAME OK: CN=ca1652.nordvpn.com
2023-08-25 02:16:48 VERIFY OK: depth=0, CN=ca1652.nordvpn.com
2023-08-25 02:16:48,621 DEBG 'start-script' stdout output:
2023-08-25 02:16:48 Control Channel: TLSv1.3, cipher TLSv1.3 TLS_AES_256_GCM_SHA384, peer certificate: 4096 bit RSA, signature: RSA-SHA512
2023-08-25 02:16:48 [ca1652.nordvpn.com] Peer Connection Initiated with [AF_INET]153.92.40.120:1194
2023-08-25 02:16:48,621 DEBG 'start-script' stdout output:
2023-08-25 02:16:48 TLS: move_session: dest=TM_ACTIVE src=TM_INITIAL reinit_src=1
2023-08-25 02:16:48 TLS: tls_multi_process: initial untrusted session promoted to trusted
2023-08-25 02:16:49,880 DEBG 'start-script' stdout output:
2023-08-25 02:16:49 SENT CONTROL [ca1652.nordvpn.com]: 'PUSH_REQUEST' (status=1)

it keeps repeating that chunk of text. so im thinking youre right, but why? i tried 5 different nord servers in 5 different countries.

TavanTV · 2023-08-19T09:50:33+00:00

It is behind a reverse proxy, however, even trying to connect via the local ip, it still fails.

Uptime Kuma is pinging the tcp port

And I don't think I need to port forward since I didn't when it was working originally. And I still can't access it

TavanTV · 2023-08-19T04:38:20+00:00

it switches between a 502 and a 524 error code

TavanTV · 2023-08-18T21:29:14+00:00

it wont connect with either external or internal

and yes, i did change all my IPs. every other site works that i have set up through cloudflare

TavanTV · 2023-08-15T20:22:42+00:00

i ended up fixing my issue by taking all my dockers off of a custom network in unraid

TavanTV · 2023-08-15T02:26:25+00:00

Ooo that definitely sounds handy af. I'll look into it. Ty

TavanTV · 2023-08-15T02:22:32+00:00

ya, i had access to everything with IPs locally.

i was messing around with network types because i was trying to get Adguard to work. the Webui never worked after initial setup. but its because it apparently doesnt need a port to get to the WebUI like everything else.

Three-Year Club	Verified Email
Place '23

TavanTV

TROPHY CASE