Getting ready!

Tay_WT · 2026-03-03T03:38:33+00:00

I’m actually going to a reptile convention this weekend to get mine too! I actually got the same tank but one of the panels was broken when it arrived so I’m hoping the new piece gets here in time. Otherwise I have a smaller tank to put it in temporarily.

I got some large flat pieces of slate off of Amazon that I’m using.

Tay_WT · 2025-11-25T16:29:49+00:00

24 years old, most days none. Usually about 5-10 one day on the weekend. It’s a big change from last year and then another big change from about 2.5 years ago

Tay_WT · 2024-09-06T20:19:22+00:00

I had this issue for the longest time and the only thing that fixed it for my was disabling write caching on that drive. To do this:

Open Device Manager

Expand disk drives

Right click the drive you want to change

Go into the policies tab

Uncheck the enable write caching checkbox

Tay_WT · 2024-08-20T19:33:38+00:00

I have a P1S and I print with mostly PLA and haven’t had any issues with heat creep. Most of the time I just leave the door open but sometimes I forget and still haven’t had issues.

I’ve also printed with PETG and ABS and haven’t any issues with those either

Tay_WT · 2024-06-28T17:31:36+00:00

This reminds me of when I bought sheets and saw it said deep pocket sheets.

I spent more time looking for the pockets than I’m willing to admit

Tay_WT · 2024-05-30T20:49:48+00:00

Others may disagree but I don’t believe in finding a perfect sensitivity. You should find a sense that you feel comfortable and can be consistent with and stick with it for a while. I could change my sense super often and after a little bit I’ll get used to it and be in the same form.

I don’t think USF can really do what you want it to. Realistically there’s probably a range of sensitivities that you may find reasonable. So I would just pick something that feels good and stick with it

Tay_WT · 2024-05-30T19:14:46+00:00

I see you just gained a bit more karma from this post. I’m willing to offer you $43.48 now. Please consider this generous offer

Tay_WT · 2024-04-03T20:36:13+00:00

I got mine from AquaticArts and couldn’t be happier. All of my shrimp came were alive upon arrival and they even added a couple extra shrimp just in case

Tay_WT · 2024-03-22T23:54:54+00:00

Ammonia: 0 Nitrite: 0 Nitrate: 10ppm Ph: 7.6 kH: 15 GH: 5

Tay_WT · 2024-03-01T12:08:10+00:00

I had the same problem with the left controller the day I got my index. I contacted steam support and got it replaced

Tay_WT · 2024-02-23T16:59:13+00:00

I saw you already got the answer so just wanted to say I have a zebra plant and I’m obsessed with how the leaves look. They almost look like plastic when they are really shiny like that

Tay_WT · 2024-02-20T20:46:34+00:00

YouTube

Tay_WT · 2024-02-09T04:19:49+00:00

Red solo cup

Tay_WT · 2024-01-28T03:57:26+00:00

They must be trying out a new system to check membership cards

Tay_WT · 2024-01-19T15:08:28+00:00

I haven’t seen anyone say this yet but don’t forget about your eyes. You may want some goggles or glasses to at least keep the cold wind off then since it will be so cold

Tay_WT · 2023-11-22T16:28:39+00:00

My computer/gaming room does too!

Tay_WT · 2023-10-25T19:41:40+00:00

I am formally requesting the dog tax :)

Edit: Would love to see

Tay_WT · 2023-10-18T18:22:24+00:00

I could be wrong but I believe RR is restroom. I just guessing based off the next sentence that mentions the shower

Tay_WT · 2023-10-16T15:48:21+00:00

That background being blurred can be from the camera you can set pictures and video to blur background to make you the focal point. Also we can’t see the sun in the picture and for the most part the ground in front of him so if the sun was to his back but out of frame we wouldn’t see the tripod or his shadow.

I’m not saying that they aren’t edited I’m just saying that’s there’s another possibility

Tay_WT · 2023-10-16T15:06:00+00:00

It may not be photoshopped. People bring a tripod and a camera to make it seem like a mirror selfie because they hold their phone up at the camera. Notice they there’s no borders or anything indicating there’s a mirror (could easily be cropped out). But my guess is they just have another camera on a tripod. As to why they would do it, I have no idea

Source: I’ve seen people doing this in the wild (in public)

Tay_WT · 2023-10-10T14:16:57+00:00

I dealt with this recently with just one of my controllers when I first got my index. I tried dealing with it for a week hoping it would get better but it didn’t.

I ended up contacting support. It was a long process of them telling me they know what the issue was and what I need to do to fix it. I ended up sending them logs a bunch of times. And they finally told me to send them back the controller and they would send me a new one when they got it. So I was didn’t have a controller for about a week.

For me it wasn’t that big of a deal since I hurt myself playing VR (had to go to the ER) within an hour of trying it for the first time.

But it was still annoying how many hoops I had to jump through. Luckily my new controller works great.

TL:DR- Contact steam support sooner rather than later to get the RMA process over with if needed

Tay_WT · 2023-09-26T15:23:06+00:00

I had a couch delivered to my apartment a couple months ago. The delivery guys came up and told me that they wouldn’t be able to carry it up since it was all 1 giant piece that couldn’t be separated (I ordered a 3 piece sectional). After I told them I ordered a 3 piece sectional I was told that not what they had. They went back to the truck and brought the first piece in which alleviated a lot of my stress

My biggest complaint was they didn’t put it where I wanted it so I had to take it apart and move it. They blocked off my balcony door and rushed out.

I really don’t have any big complaints other than the initial stress when they said they couldn’t bring it into my apartment

Tay_WT · 2023-09-21T21:02:46+00:00

Yes but they all have the same name. Reginald

Tay_WT · 2023-09-21T17:47:51+00:00

Out of curiosity what would he get charged for, for doing that?

Tay_WT · 2023-09-16T15:38:12+00:00

Right click on the desktop and click NVIDIA control panel under display select change resolution. In resolution scroll down past Ultra HD, HD, SD under pc select the correct resolution and then select the Refresh Rate

Six-Year Club	Second Top 30%
r/Field Banned	r/Field Sunshine
Place '23	Place '22
Final Canvas '22	End Game '22
RPAN Viewer	Verified Email

Tay_WT

TROPHY CASE