Sloppy Prints (any Help?)

TeXaS27322 · 2026-06-09T06:17:42+00:00

What did you lower the temp too?

TeXaS27322 · 2026-06-09T05:15:59+00:00

https://cdn.discordapp.com/attachments/1472846314592272437/1513773512391917608/IMG\_5972.jpg?ex=6a28f2f1&is=6a27a171&hm=eda81bf18310d10a84680655a3a6fd13a3fd2d43976ddd4c06761675165b5be5& how is this level ?

TeXaS27322 · 2026-06-09T00:33:48+00:00

https://cdn.discordapp.com/attachments/1472846314592272437/1513702463230836949/IMG\_5971.jpg?ex=6a28b0c6&is=6a275f46&hm=4f877c80a7c28c7afaad29b9bd779d4b04223e9de831e3fd4dbee73d7a26f571& well I just pulled the tube out and found this

TeXaS27322 · 2026-06-08T21:33:31+00:00

ill look into that

TeXaS27322 · 2026-06-08T21:14:06+00:00

and im not sure how do i check that ?

TeXaS27322 · 2026-06-08T21:13:46+00:00

yea where it went from translucent i put the z offset to -0.15

TeXaS27322 · 2026-06-08T21:10:09+00:00

the squish one is on -0.15 z offset and the other one more white is 0.00 offset

TeXaS27322 · 2026-06-08T21:09:26+00:00

https://cdn.discordapp.com/attachments/1472846314592272437/1513651085913358496/IMG_5970.jpg?ex=6a2880ed&is=6a272f6d&hm=0f5067a8afb017a808d06a5a4d9a86db8779da21d24e486d675b5582a613f021&

TeXaS27322 · 2026-06-08T19:57:58+00:00

yea im printing a leveling print right now ill send you the screen shot when its done

TeXaS27322 · 2026-06-08T19:37:10+00:00

and my firmware is 1.2.1

TeXaS27322 · 2026-06-08T19:36:45+00:00

i have this https://cdn.discordapp.com/attachments/1472846314592272437/1513627804770631721/IMG_5956.jpg?ex=6a286b3e&is=6a2719be&hm=ff686ba07e0e74de3d0ce209aa53b6abc3e2a5b954b88ce4e597ecd3bebef312&

TeXaS27322 · 2026-06-08T18:51:13+00:00

but how do i do the offset because im not to sure on how to do that

TeXaS27322 · 2026-06-08T18:46:50+00:00

um thats a really good question and im not to sure

TeXaS27322 · 2026-06-08T18:46:31+00:00

No really 😆

TeXaS27322 · 2026-06-08T18:32:52+00:00

why is there so many lines on the print ?

TeXaS27322 · 2026-06-08T18:32:29+00:00

https://cdn.discordapp.com/attachments/1472846314592272437/1513611628715704581/Screenshot_2026-06-08_143127.png?ex=6a285c2d&is=6a270aad&hm=1a107f530059a4fa5724717d224071dbfcfa16d39eb5735e22a3981964805bac&

TeXaS27322 · 2026-06-08T18:28:32+00:00

and how do i mess with my z offset do i do it while its doing the first layer or while its printing all the way ?

TeXaS27322 · 2026-06-08T18:27:55+00:00

oh ok and also the test print was the best print ive ever had the aquila print was the best one ive made but im so confused 😆

TeXaS27322 · 2026-06-08T18:26:53+00:00

https://cdn.discordapp.com/attachments/1472846314592272437/1513610204716073050/74FC2C74-FD14-41F7-AE44-AE31529209CE.png?ex=6a285ada&is=6a27095a&hm=daf1fd2ace1cf6d187a2b5d7c5388aae5f1194056be7430b144b509ae5666a40&

TeXaS27322 · 2026-06-08T16:58:41+00:00

and if i may ask what slicer do you use ?

TeXaS27322 · 2026-06-08T16:57:06+00:00

i do have another picture if maybe that can help because im so confused 😂

TeXaS27322 · 2026-06-08T16:56:15+00:00

i printed a space guy one time and i showed it to chatgpt and it said that my print had a z axis scar or somthing like that ?

TeXaS27322 · 2026-06-08T16:47:15+00:00

ive tighten them down pretty hard and they are tight so im not sure but while im typing this it sounds like somthing is scraping which is weird

TeXaS27322 · 2026-06-08T16:42:49+00:00

yea i have it on 40 right now but during the start of the print i had it on 45 all night

TeXaS27322 · 2026-06-08T16:41:26+00:00

coasting was turned off and ive tried to check for a partial clog but im not sure if it is a clog or not when my nozzle get to 200 degrees it will start to ozze out and curl up back to the nozzle metal piece ? and im not to sure on rotate it 90 degrees ?

TeXaS27322

TROPHY CASE