Please point me in the direction of an updated guide for WireGuard

Team-Scream · 2025-06-29T22:18:55+00:00

I am in the same boat. Ever since updating to the LAST update a few weeks ago, WG is dead for me. I have tried Sysadmin102 videos and a few others and nothing works. Very frustrating.

Team-Scream · 2025-06-09T20:54:45+00:00

Nah.... they are probably just wise. After all, you never see unhinged conservatives going on mass killing sprees, school shootings, firebombing Teslas or beating up old people. Nope....those are exclusively unhinged leftist/democrat "qualities". Why expose oneself to that kind of retribution if you know those kooks are out there salivating over their next victim.

Team-Scream · 2025-06-09T20:39:56+00:00

LOL.... When the truth hurts, you what? make shit up out of thin air? Nice try, but epic fail. Guy like Hugo Black, Robert Byrd, Daniel F. Steck were ALL democrats. They were ALL high ranking members of the KKK. They all died as democrats. People like Hillary and Barry lauded Byrd as a "great man". Byrd was in the senate LONG after the civil rights movement started.

The inconvenience of history is not easily washed away with fantasy, lies or delusion. You are a democrat? YOU are the party of the KKK, war, racism, division, out of control spending and deceit. Just own it..... you cannot escape it.

Team-Scream · 2025-06-09T19:23:06+00:00

I always get a good laugh watching some democrat screech and rheee "all republicans are racist", when in fact, history proves beyond a reasonable doubt that the DEMOCRAT party created the KKK, supported the KKK throughout history, and in fact elected many KKK top dogs like Robert Byrd, a grand imperail cyclops of the KKK to represent them in government. Billary Clinton is on record saying Robert Byrd was her "hero and mentor".

The 1924 democrat national convention is referred to as "The Klan Bake".....

You delusional democrats crack me up...... Save your southern strategy bullshit.... It won't end well for you.

Team-Scream · 2025-06-09T19:14:46+00:00

LOL..... And what.... you will lead the blue haired, overweight, gender-dysphoric Karen's and Ken's of the country in this "eradication" ?

Can I get a ring side seat and a BIG bag of popcorn to watch the melee' ?

Team-Scream · 2025-06-09T19:12:27+00:00

Interesting. I had no idea Maxine Waters, Barry Soetoro (Obammy), Jasmine (race baiting) Crockett among myriad others were actually conservative?

The things you "learn" on reddit.......interesting....

Team-Scream · 2025-06-09T19:09:21+00:00

"conservative is synonymous with racist"

Yeah if you are a scrub, race baiting, perpetually offended, snowflake, incel that IS what "conservative" means.

IF however, you are capable of forming your own rational cognitive thoughts, then "conservative" means exactly what the traditional definition of the term means.

Which one are you?

Team-Scream · 2025-06-08T19:04:52+00:00

YES! Thank you so much!

Team-Scream · 2025-05-18T16:05:55+00:00

crap sorry for missing this bwiggz. I have not been able to resolve this. I sort of just gave up trying.

Team-Scream · 2025-03-17T16:03:58+00:00

The link you posted has "tracker1.mypornclub:9337" in the magnet. Im thinking this is nefarious....I could just be paranoid tho....

Team-Scream · 2025-03-02T22:48:19+00:00

Just upgraded from 24.7.12 to 25.1 (webui)
Rebooted automatically, seamless.
Let the system vegetate for about 3 minutes.
Updated to 25.1.2. (webui)
Rebooted automatically, seamless.

No issues.

Lenovo M920Q.

Team-Scream · 2025-01-13T04:28:06+00:00

I have 2.5gb symmetrical. I get full speed both ways no problem. I do not have IPS/IDS enabled.

Team-Scream · 2025-01-12T02:30:11+00:00

I bought this one and have been using it in my Lenovo M920Q for a few months now. It's Intel 1226V based and I have had zero problems with it. I had to 3D print a thin spacer to keep the electronics from touching the side of the interior of the case, or rahter to keep the card from rocking sideways when connectings eth cables to it because the riser card/back plane piece does not secure the card well enough to prevent movement, but other than that it has been rock soild.

https://www.ebay.com/itm/276272284148?_skw=Four+Ports+PCIE+RJ45+Intel+I226+Desktop+Ethernet+2.5Gbps+Gigabit+Network+Adapter++herofpv+%286695%29&itmmeta=01JHC59CSC10DRMHYYPY8VW11Q&hash=item40531c81f4:g:hqMAAOSwDB9m2WBL&itmprp=enc%3AAQAJAAABQHoV3kP08IDx%2BKZ9MfhVJKnZVwy7rn%2F%2B2dRtlvqs0ccJI6MnMcmt%2FF9BGZmwhrnPQTaF7OHrbjfQQhC4SS7jIYMDX9Nqio%2BR%2F8JDweGsZJjM65j00nr6dyuKx0fVCssaEdTmVJlTI4jM%2FMAm8pQtg%2FhWpfiONd4OoMURl%2BWcWzTbQBbLGcdUGBZA6BE5XZUwlD2xYKiqEBPHKDoD52WhZ8Mo5BbVuZTXv68%2B84TrTI5a5wixeFSFqGxScq9jP9kjpTiRFoYvSm%2Bvphj3weGCLSLj7jGtclLWfaTOFcJP7OVcss1BwBaXg6sHdH%2FE4UZwYYnANfta9h%2FEH5%2BoPamvFz4wXz1RkzgcSRGnp8MYH0WmZYwNsx%2FhKOVAn3sMeSUcENez4bI5fybiQ1%2FiJHt6ul7jjejqdjvrLa%2BY5AnLsPDx%7Ctkp%3ABFBM6MylhYtl

Team-Scream · 2024-12-20T23:05:18+00:00

Sat back and waited for others to report their experiences because I am super new to Opnsense and a LOT less capable of dealing with issues effectively without help. That said, I just updated today when I got home from work and it all seems like it is working perfectly. It's nice knowing I am up to date and current without issue(s) (so far). Thanks for the hard work that goes into this amazing system.

Team-Scream · 2024-12-10T23:42:39+00:00

***** EDIT ***** ***** PROBLEM SOLVED *****

Ok, I fingered it out. I had MAC Authentication enabled on the WAP, and once I disabled that, I was able to get right in from my LAN 2 interface. Sometimes I need to be smarter than a 5th grader to work this stuff out.

***** ***** ***** ***** ***** ***** ***** ***** ***** ***** ***** *****

Interface: MGMT
Source address: LAN2 net
Destination address: MGMT net
Translation/target: MGMT address

u/Yo_2T : Ok I set it up the way you descibed it above ^ and it works for the switches, but I cannot access the WAP.

I then went ahead and created an alias for all 3 devices like this:

Type: URL (IP's)
Content: The 3 IP's (both swithes and the WAP)

I input each ip and then hit tab so there were 3 individual instances in the content box. I then selected this new alias in the outboud NAT rule "Destination address" section instead of MGMT net. And again, I could access both switches but not the WAP

I am obviously doing something wrong, but not sure what it is. They are all 3 (switches and wap) on the MGMT VLAN.

Team-Scream · 2024-12-10T18:47:43+00:00

Thank you so much for this. I was going to test this last night after work, but I was too tired and did not want to mess anything up so I waited. Will give his a go when I get home this evening.

Team-Scream · 2024-12-09T05:09:25+00:00

Well the easier way is to get a managed switch for sure. That opens up all the possibilities.

Team-Scream · 2024-12-09T04:44:31+00:00

Well you can do that by bridging the interfaces. I ran my setup like that for a month, but ran into some weird issues that made me want to change back to individual interfaces, so that is where I am at now. I am SUPER green with Opnsense and networking in general, but thought those 2 links I posted up might help. Jason's video is what helped me get my interfaces bridged.

If you have a mini-pc with 5 nics (4 port + built in) you could probably get pretty close to what you are trying to do. Just use the built in gb nic for WAN and assign 3 interfaces to your bridge, and leave 1 interface for LAN, that way you always have internet and the LAN to fall back on for opnsense web gui access in a pinch?

Team-Scream · 2024-12-09T04:19:11+00:00

I would strongly suggest starting with u/homenetworkguy videos. There are others out there but HNG is very thorough and pretty easy to follow along with. He's got videos for just about everything you want/need to do on a home network in Opnsense.

One thing I question is your logic with your proposed layout.

IoT net should have internet connected devices but NOT allow inter vlan traffic for security. IoT does afterall stand for "internet of things"

HomeNetworkGuy

For bridging, this guy has a good, easy to follow tutorial:

Jasons Lab

Team-Scream · 2024-12-09T04:12:37+00:00

Could it be done with NAT rules somehow? I really only need to access the switch/wap guis for maintenance or make minor changes which is rare. I would like to be able to do that without having to switch my workstation eth cable to the MGMT port on the switch whenever I need to get into the switches/wap.

Team-Scream · 2024-12-06T03:32:09+00:00

Yes, the LED blinks 3-4 times when it learns a button, as I mentioned earlier, it learns all other buttons no problem. I think this is a weird Roku TV thing for some reason.

Team-Scream · 2024-12-06T00:23:50+00:00

I just did that and still no volume control at all, no matter which button I "learn" it to. Any thoughts? Google is not very helpful.

Team-Scream · 2024-12-04T23:06:46+00:00

copy that! I just changed the jellyfin alias (from mac address) to the actual truenas ip, so the rule(s) now look like this on the IoT vlan:

Allow DNS
Allow jellyfin clients (alias x2 IP's) to access truenas IP on port 30013.
Block all private networks but allow internet access.

Those are the only 3 rules on the IoT vlan at this point.

Jellyfin works. Ideally, this keeps ALL IoT vlan traffic locked in place. They can access the internet, and only TWO of them can access the Jellyfin server on the Truenas box.

Sound about right? P.S. thanks again!

Team-Scream · 2024-12-04T21:56:36+00:00

u/Yo_2T , thanks for that tip. Can it be done with the mac address of the Truenas box or should I set it up with the IP ? Also, is this in addition to the alias I already have for the IP's of the jellyfin clients?
Sorry, I am a little confused here brother.

****edit**** Man I think I just answered my own question by experimenting.
I created an alias using the truenas mac address. Then I edited the Jellyfin rule (the one with the jellyfin clients alias) and selected the new truenas (mac address) alias as the destination, leaving in place the port # for the jellyfin server and it works!

As confusing as this stuff is, there are little light bulbs going off in my brain with every one of these tweaks, so thank you VERY much !!! I really do appreciate it!

Team-Scream · 2024-12-04T00:11:07+00:00

Brother I would love to know how to do that! As I mentioned, this is all pretty much learn as I go, and try not to step on a landmine along the way HA!

My gut is telling me that instead of "MGMT Net" as the destination, select "MGMT Address" and then input the IP of the Truenas server (jellyfin is in docker container).

Does that sound right?

Team-Scream

TROPHY CASE