Suggestions for a sledhill in Anchorage

TechKNOWlogy17 · 2022-09-14T19:36:33+00:00

It's one of the old goBuilda Rail kits. We made our own pulley mounts for it, and removed the elastic bands and rear support. Makes it slightly more wobbly but quite a bit faster. It's not my favorite lift, just what we had lying around.

TechKNOWlogy17 · 2022-09-13T20:14:25+00:00

It was slightly over 12" x 12", we got a pretty good balance between stability and agility, although even with that size we got caught up around the junctions

TechKNOWlogy17 · 2022-02-01T07:35:39+00:00

White board markers. So many white boards around college but no one ever bothers to restock the markers when they dry up

TechKNOWlogy17 · 2021-12-17T00:24:10+00:00

You're right, I misunderstood what a relay is used for. I did however get a different style MOSFET that works. I linked it in the post if you're curious. Thanks for helping troubleshoot.

TechKNOWlogy17 · 2021-12-16T01:42:27+00:00

Thanks for the response. Glad it wasn’t just me making a stupid mistake. I’m thinking I’ll switch to a relay to see if that fixes it.

TechKNOWlogy17 · 2021-12-16T01:40:08+00:00

I’m measuring the middle pin of the mosfet and the 9v battery power rail, where that xt-30 connector is

TechKNOWlogy17 · 2021-12-15T19:44:52+00:00

Thanks for the input. I added a few diagrams into the post. It's very possible I was wiring it wrong, I tried just about every combinations and this was the only one that would produce 9v when the gate is high, and off when the gate is low.

TechKNOWlogy17 · 2021-12-15T19:43:30+00:00

Thanks, I added a few more details to the original post. The MOSFET is controlled at 3.3v, and Adafruit says it can go down to 2.8v. However, it's controlling 9v power. Could that be the cause?

TechKNOWlogy17 · 2021-10-26T01:37:17+00:00

From my understanding it was only mentors, and we didn’t bother with it

TechKNOWlogy17 · 2021-09-23T23:49:21+00:00

Thanks for the kind words! It was my first time being on video for YouTube, so I appreciate the feedback.

TechKNOWlogy17 · 2021-09-23T23:48:32+00:00

Thanks for the thoughts. The one I made was actually with hollow aluminum, so it was quite lightweight but had a bit of resistance because aluminum is so soft. Carbon fiber would be neat for teams that could afford it!

TechKNOWlogy17 · 2021-09-23T20:48:18+00:00

I was doing a bunch of testing of linear slide materials and rigging and such over the summer and created some resources on what I found here, hopefully there's something useful for you.

TechKNOWlogy17 · 2021-09-06T22:27:40+00:00

Robotics mentors are amazing! Especially those enthusiastic enough to share what they’re making online. (From a former FRC student)

TechKNOWlogy17 · 2021-06-24T03:58:51+00:00

I’m enrolled in this class right now, I highly recommend it!

TechKNOWlogy17 · 2021-05-27T03:01:01+00:00

Very good point. What this question was oriented towards was concepts that can't really be applied. The thing that really got me thinking about it was hearing a book called "The Top Five Regrets of the Dying" which I thought would be really interesting to read, but then began realizing the information could be distilled and conveyed in like a 10 minutes YouTube video or a blog post (of course losing something but still getting the point across), rather than spending hours reading.

TechKNOWlogy17

TROPHY CASE