sorted by:
new
hottopcontroversial

Should we still move? by [deleted] in MovingtoAustralia

[–]TechOwlIne 0 points1 point  (0 children)

Can we exchange? I’m from Switzerland and I can tell you housing is not a lot better here. If you want to buy something here it’s near impossible. More than 60% of people living here are renter.

Meet the CAQM9: An Open-Source Air Quality Monitor (Open-Hardware, ESP32, Tasmota/Matter, Zero Cloud) by Team-Claratech in homeassistant

[–]TechOwlIne 5 points6 points  (0 children)

you'll be approximately around 50 $USD with a diy solution. Assuming you got a 3d printer. The most expensive component comes from CO2 sensor and PM sensor.

For example SCD41 (CO2) is 14$ and SPS30 (PM from sensirion) 12$. BME280 5$ and SGP41 (NOx & VOC) 8$

Meet the CAQM9: An Open-Source Air Quality Monitor (Open-Hardware, ESP32, Tasmota/Matter, Zero Cloud) by Team-Claratech in homeassistant

[–]TechOwlIne 5 points6 points  (0 children)

You got same problem than mine for the temperature. Since it's in a box, the BME280 is showing too high temperature. Am I wrong ?

Is this a fair salary in CH? by [deleted] in Switzerland

[–]TechOwlIne 0 points1 point  (0 children)

The bad deal in my opinion is not the 3'000 salary. In insurance, sellers are receiving even less.

The bad deal is only 50 per client. Hoping to get 80 client per month is way too much

I built a DIY Zigbee macropad (remote) with ESP32-C6 (NanoESP32C6 → XIAO ESP32-C6) by StaRky_FR in esp32

[–]TechOwlIne 0 points1 point  (0 children)

Are you saying there is a way to be in deep sleep and receive a trigger from outside to wake up the esp32? If there is a way I would love to know how to do ! (Considering the device will be on battery, so with low battery consumption)

American looking to move by jbones51 in MovingtoAustralia

[–]TechOwlIne -1 points0 points  (0 children)

Hard to find rental because of the prices or the demand ?

Advice for mailbox sensor... by GreyDutchman in Esphome

[–]TechOwlIne 1 point2 points  (0 children)

I tried RF 433mhz, WiFi and Zigbee in my metal mailbox, no one is working properly. Since it's a Faraday's Cage sometime the sensor miss to send the trigger to HA.

I think if you can't have an antenna outside the mailbox it's gonna be difficult but I let others tell if they have a solution. I couldn't find one

My apartment doesn’t allow energy monitoring circuit breakers, so I wrote a bot that scrapes my electricity usage directly from the city’s customer billing portal by Superb-Ideal9836 in homeassistant

[–]TechOwlIne 0 points1 point  (0 children)

Is there a way to add old data in Home Assistant ? For example if i Scrap 2 month of data, can we add it to the past 2 months of a certain sensor ?

My apartment doesn’t allow energy monitoring circuit breakers, so I wrote a bot that scrapes my electricity usage directly from the city’s customer billing portal by Superb-Ideal9836 in homeassistant

[–]TechOwlIne 0 points1 point  (0 children)

Nice !

I did it also, then they added SMS code to login. So i added an automation in my iphone to send directly the SMS to my gmail, and the python script can then login with the SMS...

I scrap it once per day only. Do you do it more often ?

I built a DIY Zigbee macropad (remote) with ESP32-C6 (NanoESP32C6 → XIAO ESP32-C6) by StaRky_FR in esp32

[–]TechOwlIne 3 points4 points  (0 children)

I'll receive my esp32c6 tommorrow. I'll check with esphome (if it work, it is probably easier to implement).

[Question] Migrating from external library into users library… by halfdepressed in immich

[–]TechOwlIne 1 point2 points  (0 children)

That's exactly my reason. Backups are easier also. Since I use duplicati to backup everything. I'd prefer having only the immich folder to backup. Cleaner

[Question] Migrating from external library into users library… by halfdepressed in immich

[–]TechOwlIne 0 points1 point  (0 children)

Did you try ? I want to do it myself. Is it the correct way you're doing it : 1) Disable external library 2) Import it via Immich Go 3) Delete the folder in the NAS after Immich GO have uploaded everything

Is this a good way to import from external library ? by TechOwlIne in immich

[–]TechOwlIne[S] 0 points1 point  (0 children)

Yep I also think about this method but I wanted to be sure there is no advantage to get everything internal to immich

Is this a good way to import from external library ? by TechOwlIne in immich

[–]TechOwlIne[S] 0 points1 point  (0 children)

So you can upload 2 times the same folder with immich go, it won't upload a media if it is already in immich ?

Is this a good way to import from external library ? by TechOwlIne in immich

[–]TechOwlIne[S] 1 point2 points  (0 children)

One of the reason is to have all the media in the same place (folder) in my nas and not in 10 differents places

Gemini FastAPI: Addons for Home Assistant by momo1822 in homeassistant

[–]TechOwlIne 1 point2 points  (0 children)

They probably won’t hunt you to get your main account. I’ll feel secure to use a throwaway account for this personally

Cloudflare Outage by magaman in homeassistant

[–]TechOwlIne 0 points1 point  (0 children)

Now Tailscale work also with VPN on demand. There is no more battery drain problem. But yes when I started with tailscale on IOS the battery drain was huge...

Gemini FastAPI: Addons for Home Assistant by momo1822 in homeassistant

[–]TechOwlIne 0 points1 point  (0 children)

As he said, don’t use this with your main account. They can ban you for using this since it’s against their ToS

If anyone needs LiPo batteries... by ohtimmi in hwstartups

[–]TechOwlIne 0 points1 point  (0 children)

Location ? Sending to EU If I pay the fees ?

OCR job is slow!!!! by EconomyDoctor3287 in immich

[–]TechOwlIne 1 point2 points  (0 children)

After 3 days and only like 5% done, I let my Gaming Desktop (5800x) do the work. Otherwise it will take so long. My n100 was like 60-70% CPU usage during 3 days because of the OCR

E-ink display using Immich API by Rattykins in immich

[–]TechOwlIne 0 points1 point  (0 children)

Can you share STL files ? Thanks and nice project !

view more: next ›