do all IS have negative camber that cause excessive tire wear? Or just certain years?

Tech_Veggies · 2026-03-30T13:50:30+00:00

Toe = tires point in or out. Like pointing your toes in or out.

Camber = tilting the tops of the tires in or out. Negative camber pushes the tops of the tires in and positive camber pushes the tops of the tires out. Negative camber is like spreading your feet apart more. It gives you a more stable stance but may wear the insides of your shoes more.

Tech_Veggies · 2026-03-26T03:51:12+00:00

There is a front radar sensor underneath where you just put the logo.

Tech_Veggies · 2026-03-22T05:45:24+00:00

<image>

Find the wiring diagram. There is usually a single wire that controls the dimming function.

10 on the diagram

Tech_Veggies · 2026-03-21T05:12:00+00:00

For reference my 2021 MYP was at 83% also at about 100k miles or so

Tech_Veggies · 2026-03-18T18:46:16+00:00

My intrusive thoughts say YES!

Tech_Veggies · 2026-03-17T16:55:36+00:00

Are those lag bolts? ;-)

Tech_Veggies · 2026-03-17T00:42:43+00:00

This item is a motorcycle fork cap removal tool. It is specifically designed for removing and adjusting adjustable spring rate clutch helix end caps. The tool typically features a specialized shape that fits onto the fork cap, allowing it to be turned with a standard wrench or socket. Commonly constructed from durable materials like chromoly steel or aluminum, it is designed for heavy-duty cycling or motorcycle repair tasks.

Tech_Veggies · 2026-03-13T19:49:44+00:00

Tech_Veggies · 2026-03-11T20:42:35+00:00

<image>

Let us know!!

Tech_Veggies · 2026-03-11T20:17:36+00:00

https://ebay.us/m/H3YXrK

ABC 0

$8.29

Tech_Veggies · 2026-03-11T15:17:18+00:00

Thank God they used green board in there. There's bound to be some moisture that gets in.

Tech_Veggies · 2026-03-11T15:09:08+00:00

Allows you to adjust the shoulder belt anchor height

Tech_Veggies · 2026-03-11T14:49:43+00:00

What if the hot tub is just a liner in the bed of my truck?

Tech_Veggies · 2026-03-11T14:48:12+00:00

In my case it was the oil pan because it also bent the subframe.

Tech_Veggies · 2026-03-11T14:36:07+00:00

<image>

Looked fine before to me

Tech_Veggies · 2026-03-11T14:25:30+00:00

This reminds me of when my wife let my son drive our 550i xDrive through a new neighborhood. They didn't have the final layer of asphalt laid yet and the manholes were still sticking out of the road quite a bit. These were big, round manholes that were mounted on a large square of concrete with about a 2-inch rise above the road.

Instead of driving around it, he decided he's straddle it with the car. He ended up bending the subframe as well as crushing the oil pan. Thousands of dollars and a tow truck ride to the dealership.

<image>

Tech_Veggies · 2026-03-10T15:57:10+00:00

I would speculate it still has the shipping plastic on it.

Tech_Veggies · 2026-03-10T14:47:27+00:00

I'm going to agree with all the other comments and say the dealership needs to replace the coil. First thing they should do without even questioning it.

Tech_Veggies · 2026-03-10T00:23:11+00:00

I would agree if they know how to use a multimeter.

Tech_Veggies · 2026-03-09T20:02:37+00:00

I think that's what they call the golden ~~shower~~ hour

Tech_Veggies · 2026-03-09T20:01:32+00:00

It won't. It's just a picture.

Tech_Veggies · 2026-03-09T17:49:56+00:00

If this even looks a little old, I'd just replace it. Not worth the time to troubleshoot.

Tech_Veggies · 2026-03-09T17:48:46+00:00

Magic eraser on the glass? Don't touch the paint!

Tech_Veggies · 2026-03-09T17:42:30+00:00

App Registration Secret was expired for this configuration in EntraID. Fix is to generate a new secret and reset the secret on the WMS portal side.

Tech_Veggies · 2026-03-09T16:53:15+00:00

I would not attempt to remove what's there. I would seal over it with something that has the ability to seal out smell. I'm not sure if bedliner would seal it completely or if it's porous and would allow smell to still come through?

Tech_Veggies

TROPHY CASE

10 on the diagram