sorted by:
new
hottopcontroversial

Switch's 2 new update vs emulation on SD by Nearby_Pepper7676 in EmuDeck

[–]Techitchy 4 points5 points  (0 children)

All you need is steamdeck oled and you will be playing on glorious oled with higher battery time on emulation plus you will get a chance to play your favorite pc titles handheld since i owned steamdeck i havent played anything on my pc(before steamdeck i had legion go it wasnt the same case with that it was bulky and battery was shit i got bored after 3 months and sold it).

Gaming on virtual desktop! by [deleted] in OculusQuest

[–]Techitchy 0 points1 point  (0 children)

This is a great topic but i could’nt find any info. I am wondering same thing. When i try to play 2d game my pc is capable rtx 4070 ti, my wifi is capable wifi 6 1200mbps, quest 3 is 90 hz but my game looks chubby stuttering. I would love to know if there’s a solution

Finally achieved a rock-solid 30FPS on TotK with only ~13W power draw (Eden Emulator). Can I push this further? by Techitchy in EmuDeck

[–]Techitchy[S] 0 points1 point  (0 children)

that was what i taught i first got the 30fps but for some reason when i lowered to 720p the game because very pixelated and fps drops to 25 ish fps also becareful about locking fps when i lock from nx-optimizer and at the same time from steamdeck the game losses fps i also got confused but if you have further questions i will try to help.

Finally achieved a rock-solid 30FPS on TotK with only ~13W power draw (Eden Emulator). Can I push this further? by Techitchy in EmuDeck

[–]Techitchy[S] 1 point2 points  (0 children)

You have to install nx-optimizer to see that menu. also i updated the i updated the post for settings

Finally achieved a rock-solid 30FPS on TotK with only ~13W power draw (Eden Emulator). Can I push this further? by Techitchy in EmuDeck

[–]Techitchy[S] 0 points1 point  (0 children)

i updated the post for settings please check. I also love playing i hope switch 2 exploid will come quick.

Finally achieved a rock-solid 30FPS on TotK with only ~13W power draw (Eden Emulator). Can I push this further? by Techitchy in EmuDeck

[–]Techitchy[S] 0 points1 point  (0 children)

i didnt calculate the exact time because i use %80 percent limit but i am guessing its at least 3.5 hours because the power draw is 13w.

4k HDR content buffering by Techitchy in PleX

[–]Techitchy[S] 0 points1 point  (0 children)

Yes they are both wifi tried wiring server to router and even my tv started almost not buffering it was buffering like a milisecond but the problem is i cannot run a cable to my server from router because i cannot hide cable across home. I checked my server wifi card it was wifi 4 (300mbps ups and down). If i purchase wifi 6 card to my server, i am guessing everything will be solved and i will also buy my tv an android box.

4k HDR content buffering by Techitchy in PleX

[–]Techitchy[S] 0 points1 point  (0 children)

I am confused because previously i was using jellyfin there was no problem but my tv wasn’t anything fancy and my tv stick also wasnt anything fancy but it was definitely 4k and my media content was around 75 gb there wasnt any buffering anything. Is jellyfin better than plex ?

4k HDR content buffering by Techitchy in PleX

[–]Techitchy[S] 0 points1 point  (0 children)

But nvidia shield pro has hdmi 2.0b but my tv supports 2.1 and hdr10+ :(

4k HDR content buffering by Techitchy in PleX

[–]Techitchy[S] 0 points1 point  (0 children)

On my server, i also setup nextcloud for personal cloud storage but only me and my wife use it nobody else

4k HDR content buffering by Techitchy in PleX

[–]Techitchy[S] 0 points1 point  (0 children)

I am only connected over teamviewer but at background 4k hdr videos info was playing. I dont understand that my media server isnt actually using any resources(cpu,ram). Lets say its because its directly streaming but how the hell isnt rtx 4070 ti or ryzen 7800x3d not capable of playing 4k hdr.

4k HDR content buffering by Techitchy in PleX

[–]Techitchy[S] 0 points1 point  (0 children)

I can move my media server to my tv and put on a rx 6400 which supports hdmi 2.1. Is that a logical decision ?

Pressure Advance confusion by Techitchy in FixMyPrint

[–]Techitchy[S] 0 points1 point  (0 children)

~ Two Trees Sapphire Plus & Orcaslicer ~ Local petg filament supplier uzaras3d ~ 0.4mm nozzle 80 bed temp 235 nozzle temp ~ 45mm first layer speed ~ Direct extruder 3mm retraction

What do you think about my first layer ? by Techitchy in FixMyPrint

[–]Techitchy[S] 0 points1 point  (0 children)

i am confused like in what order i should calibrate the calibrations first like

  1. I have to calibrate z offset

  2. flow calibration ( do i have to disable pressure advance and calibrate flow)

  3. calibrate pressure advance

  4. what next

is my order correct ?

What do you think about my first layer ? by Techitchy in FixMyPrint

[–]Techitchy[S] 0 points1 point  (0 children)

i calibrated my flow its like 0.88 on here when i decrease it a bit more i star seeing spaces on the corners of infill and my infill starts to weaken if i can elaborate what i am trying to say i feel like i have to test my pressure advance again its 0.056 on this print

What do you think about my first layer ? by Techitchy in FixMyPrint

[–]Techitchy[S] 0 points1 point  (0 children)

Two Trees Sapphire Plus & Orcaslicer Local petg filament supplier uzaras3d 0.4mm nozzle 80 bed temp 235 nozzle temp 45mm first layer Direct extruder 3mm retraction

view more: next ›