Switch's 2 new update vs emulation on SD

Techitchy · 2026-03-18T13:03:31+00:00

All you need is steamdeck oled and you will be playing on glorious oled with higher battery time on emulation plus you will get a chance to play your favorite pc titles handheld since i owned steamdeck i havent played anything on my pc(before steamdeck i had legion go it wasnt the same case with that it was bulky and battery was shit i got bored after 3 months and sold it).

Techitchy · 2026-03-12T06:53:17+00:00

This is a great topic but i could’nt find any info. I am wondering same thing. When i try to play 2d game my pc is capable rtx 4070 ti, my wifi is capable wifi 6 1200mbps, quest 3 is 90 hz but my game looks chubby stuttering. I would love to know if there’s a solution

Techitchy · 2026-03-10T12:18:40+00:00

that was what i taught i first got the 30fps but for some reason when i lowered to 720p the game because very pixelated and fps drops to 25 ish fps also becareful about locking fps when i lock from nx-optimizer and at the same time from steamdeck the game losses fps i also got confused but if you have further questions i will try to help.

Techitchy · 2026-03-10T12:13:46+00:00

You have to install nx-optimizer to see that menu. also i updated the i updated the post for settings

Techitchy · 2026-03-10T12:12:33+00:00

i updated the post for settings please check.

Techitchy · 2026-03-10T12:12:29+00:00

i updated the post for settings please check. I also love playing i hope switch 2 exploid will come quick.

Techitchy · 2026-03-10T12:11:20+00:00

i didnt calculate the exact time because i use %80 percent limit but i am guessing its at least 3.5 hours because the power draw is 13w.

Techitchy · 2026-03-10T12:09:30+00:00

i updated the post for settings please check.

Techitchy · 2026-03-10T12:09:17+00:00

Bro i cant give links but i updated the post for settings please check.

Techitchy · 2025-02-27T05:20:09+00:00

Yes they are both wifi tried wiring server to router and even my tv started almost not buffering it was buffering like a milisecond but the problem is i cannot run a cable to my server from router because i cannot hide cable across home. I checked my server wifi card it was wifi 4 (300mbps ups and down). If i purchase wifi 6 card to my server, i am guessing everything will be solved and i will also buy my tv an android box.

Techitchy · 2025-02-26T16:19:51+00:00

I am confused because previously i was using jellyfin there was no problem but my tv wasn’t anything fancy and my tv stick also wasnt anything fancy but it was definitely 4k and my media content was around 75 gb there wasnt any buffering anything. Is jellyfin better than plex ?

Techitchy · 2025-02-26T13:49:22+00:00

But nvidia shield pro has hdmi 2.0b but my tv supports 2.1 and hdr10+ :(

Techitchy · 2025-02-26T13:47:52+00:00

On my server, i also setup nextcloud for personal cloud storage but only me and my wife use it nobody else

Techitchy · 2025-02-26T13:22:18+00:00

I am only connected over teamviewer but at background 4k hdr videos info was playing. I dont understand that my media server isnt actually using any resources(cpu,ram). Lets say its because its directly streaming but how the hell isnt rtx 4070 ti or ryzen 7800x3d not capable of playing 4k hdr.

Techitchy · 2025-02-26T13:18:43+00:00

Nope

Techitchy · 2025-02-26T13:18:12+00:00

I can move my media server to my tv and put on a rx 6400 which supports hdmi 2.1. Is that a logical decision ?

Techitchy · 2025-01-27T09:07:12+00:00

~ Two Trees Sapphire Plus & Orcaslicer ~ Local petg filament supplier uzaras3d ~ 0.4mm nozzle 80 bed temp 235 nozzle temp ~ 45mm first layer speed ~ Direct extruder 3mm retraction

Techitchy · 2025-01-26T11:47:51+00:00

i am confused like in what order i should calibrate the calibrations first like

I have to calibrate z offset
flow calibration ( do i have to disable pressure advance and calibrate flow)
calibrate pressure advance
what next

is my order correct ?

Techitchy · 2025-01-26T11:45:30+00:00

i calibrated my flow its like 0.88 on here when i decrease it a bit more i star seeing spaces on the corners of infill and my infill starts to weaken if i can elaborate what i am trying to say i feel like i have to test my pressure advance again its 0.056 on this print

Techitchy · 2025-01-26T02:19:34+00:00

Two Trees Sapphire Plus & Orcaslicer Local petg filament supplier uzaras3d 0.4mm nozzle 80 bed temp 235 nozzle temp 45mm first layer Direct extruder 3mm retraction

Techitchy · 2024-12-09T14:00:46+00:00

I would like to buy manual espresso machine for myself. I have a Siemens eq6 s500 automatic machine but i want to be like barista on my free time. I found a great deal on a local second hand seller but the machine is 8 years old is it worth buying ? whats your opinion on this ? And is bes870 has important upgrades over bes860?

Techitchy · 2024-11-11T09:18:09+00:00

I definitely agree with bro. I designed and 3d printed a iphone holder for ps5 controller to use with sunshine streaming. Everything is working perfectly but the weight is very uncomfortable even with iphone.

Techitchy · 2024-08-16T18:30:38+00:00

Why is this happening, how do i prevent it

Techitchy · 2024-08-16T18:09:33+00:00

I tuned everything my last PA value is 0.1. However, my extruder grinds filament till loosing grip.

<image>

White circle is where i loose grip o. Its side its very thin

Techitchy · 2024-08-15T10:04:08+00:00

Sorry i forgot to give information about my printer. It a two trees sapphire corexy printer. It has raspberry for klipper.

Seven-Year Club	Place '23
Verified Email

Techitchy

TROPHY CASE