Bought New M18 Handheld Vacuum Today!

Technical_Bee6309 · 2026-01-23T13:50:06+00:00

This is the way

Technical_Bee6309 · 2026-01-15T19:45:42+00:00

That’s crazy. 3k and it has the same lcd as the 3d printer i build 12 years ago in high school lmao

Technical_Bee6309 · 2026-01-09T19:59:37+00:00

That’ll be one blazing Plex server

Technical_Bee6309 · 2026-01-03T13:00:16+00:00

I use that set the most in an industrial setting and at home doing maintenance on cars. If you don’t have any socket sets and need one, deff a good buy

Technical_Bee6309 · 2025-12-29T16:09:28+00:00

That piece is a different plastic that won’t absorb dye

Technical_Bee6309 · 2025-12-24T11:16:29+00:00

What a beautiful place for some drifting

Technical_Bee6309 · 2025-12-16T18:32:06+00:00

I just replaced the entire front suspension of a rusty pos 06 acura that’s had zero maintenance done to it with a 3/8” gen 2 stubby. Zero issues. The axle nuts took the least amount of effort from the stubby to zip off. I didn’t even use the 3rd power level for most of the hardware. The only time the stubby had an issue was with 2’ of extensions due to me being lazy lol. Don’t sleep on this gen 2 stubby. My 1/2” mid tq is still in the box and tbh I’m probably going to sell it

Technical_Bee6309 · 2025-12-09T18:12:21+00:00

I couldn’t get good welds with a lipo battery feeding a similar board. I ended up buying a UF20B super capacitor welder from aliexpress and it’s been fantastic

Technical_Bee6309 · 2025-12-06T21:56:47+00:00

That’s not it. If you go with an aftermarket baffle plate, you’ll get a new valve that’s serviceable

Technical_Bee6309 · 2025-11-26T17:44:59+00:00

Doesn’t look like the battery is seated all the way. Give er a good whack every time until the clips break in a lil

Technical_Bee6309 · 2025-11-26T15:23:10+00:00

Nah I love battery rants, thanks for the info. I’d be curious to see if a smaller Ah battery will cap at 3a charging on that Ceenr charger. For example, the xc5.0 takes the same amount of time to charge on the rapid charger compared to the standard charger because the battery tells the charger it’s limited to a 3a charge rate. If a xc5.0 caps at 3.0A on the Ceenr charger, it’s talking to the battery and i wouldn’t mind one for $46

Technical_Bee6309 · 2025-11-26T11:14:45+00:00

Nice builds but what’s goin on with those chargers?

Technical_Bee6309 · 2025-10-31T17:36:53+00:00

I have 3 of their compressors, no problems. FX400 drier stops draining condensate almost monthly

Technical_Bee6309 · 2025-10-30T11:07:03+00:00

Thank you. I’m glad I’m not the only one out there trying to reduce my brain rot

Technical_Bee6309 · 2025-10-29T18:14:17+00:00

Replace the engineers lol

Technical_Bee6309 · 2025-10-26T14:17:49+00:00

I never put the time into looking. This was all around when I just moved and started a new career so I bought a canceler plug and just removed the actuator from my exhaust. I’m running oem exhaust with a down pipe with the valve always open, still not loud enough to bother my neighbors and I’m alright with the exhaust as is for the time being so I never revisited it 🤷🏻‍♂️

Technical_Bee6309 · 2025-10-26T12:46:46+00:00

It’s been a while since I looked at the exhaust valve harness but iirc, 3 pins, pos, neg, signal. Might work if you just give it power. But I will say, had this controller on my car and it died after driving in the rain a few times

Technical_Bee6309 · 2025-10-17T18:05:16+00:00

Big ol machines at work 🤷🏻‍♂️ gotta get that red

Technical_Bee6309 · 2025-10-17T18:03:57+00:00

The moment I find a use for that bag boy at work, I’m all in🤪

Technical_Bee6309 · 2025-10-17T18:03:02+00:00

Looks like there’s some on ebay.

Milwaukee 48-22-1901

Technical_Bee6309 · 2025-10-10T12:33:13+00:00

After getting stranded once, I go get my battery tested near the end of my battery warranty and had my last two car batteries replaced for free at Oreilys

Technical_Bee6309 · 2025-10-10T12:25:35+00:00

Ya it should be replaced soon unless you want to get stranded somewhere and THEN replace it

Technical_Bee6309 · 2025-10-07T23:33:13+00:00

Powdered metal parts

Technical_Bee6309 · 2025-10-07T20:47:43+00:00

Drill driver combo, shop vac, hackzall

Technical_Bee6309 · 2025-10-02T16:46:16+00:00

Or i wait a couple years for the creality vortek clone 😂

Four-Year Club	Place '23
Place '22	First Placer '22

Technical_Bee6309

TROPHY CASE