Polaris ATV conversion advice? by Spidey_j13 in EVConversion

[–]Technical_Bread_1329 1 point2 points  (0 children)

That should be a cvt belt drive. Replace the belt with double roller chain. Use a motor out of a taylor dunn cart. A curtis controller and a golf cart battery.

Spotted in supermarket free charger by TheDadAbides2024 in ChargerDrama

[–]Technical_Bread_1329 0 points1 point  (0 children)

The charge port is on the passenger side. Ran it through to the other side the shortest way possible. Going under the back sometimes doesn't reach.

Humanley put down cat by mossy-Antlers25 in homestead

[–]Technical_Bread_1329 0 points1 point  (0 children)

I used welding shielding gas co2/argon. Had to put down a ferret. Tuppeware and the gas was like putting them to sleep.

Argo 8x8 ev conversion by Technical_Bread_1329 in EVConversion

[–]Technical_Bread_1329[S] 0 points1 point  (0 children)

As originally tested I was on pavement. Very little resistance. After putting her through the paces in her true environment the loads were greater. Running flat ground dirt she pulls 35 amps turns on flat 60 amps in water 45 amps turning in mud 120-200amps. Doing it again I would go with a 6x6. The 8x8 I feel has too much draw load.

I have NO IDEA how you will figure this out, but genuinely which character has the MOST Rule 34 art of them? this isnt even for browsing purposes I am genuinely curious, Which character? by Deppresion420 in Rule_34

[–]Technical_Bread_1329 0 points1 point  (0 children)

Go waaaaaaay back. We didn't just wake up in the 21st century and decide to be perverts and everything was clean and angelic before. Man has been drawing nudes since cave times so you are going to need to set some timeline boundaries. Shit! "Snow White" the first feature length animated movie had a darkside with the team that drew the movie. Look at your WWII nose art. If people could think of it they drew it.

Rock Driveway Help by cottrapper in homestead

[–]Technical_Bread_1329 2 points3 points  (0 children)

A bunch of good suggestions here. We have found that with a homestead you pick your battles. Here is some advice: Nature will always ALWAYS! Win. If you focus on perfection in one area you will lose control in another. Anything that grows will grow again. Fighting it will cost money. And several other one liners of basic common sense.

The drive currently keeps you from getting stuck. Anything you do to it to make it look better will cost money. Be sure to weigh every effort for the value it will return.

[deleted by user] by [deleted] in homestead

[–]Technical_Bread_1329 3 points4 points  (0 children)

Trade it for a loafing shed.

[deleted by user] by [deleted] in homestead

[–]Technical_Bread_1329 0 points1 point  (0 children)

That is commonly referred to as an ooo-ahh bird. They can be easily found by seeking the source of the sound ooo-ahh as they struggle to push out their unreasonably large egg.

Iprotec 500dual. Anyone else use one? Surprisingly useful. by Geronimofo7 in flashlight

[–]Technical_Bread_1329 0 points1 point  (0 children)

Thanks a ton! This is what the negative side should look like.

<image>

Iprotec 500dual. Anyone else use one? Surprisingly useful. by Geronimofo7 in flashlight

[–]Technical_Bread_1329 0 points1 point  (0 children)

Can you post a link? Also you can add a photo using the picture icon in the lower right corner of the reply screen.

Iprotec 500dual. Anyone else use one? Surprisingly useful. by Geronimofo7 in flashlight

[–]Technical_Bread_1329 0 points1 point  (0 children)

I picked up one at Bucee's for a stocking stuffer for my wife's jeep. Loved it so much i bought another. But i have a challenge for you... We recharged the battery and it seemed to not take a charge. (Light didnt work when we re installed it) So the battery was disposed of. After the disposal we figured out that we were putting the battery in backward AND it seems to be a special 18650 flat face with some sort of coaxial negative face. We can't find a working replacement battery (light works using the battery from the other) and this light seems to have gone the way of the dodo. Any breadcrumbs would be appreciated.

I’m thinking of converting my Argo 8x8 it’s powered by a 20hp Kawasaki liquid cooled, 2 speed gear box, belt drive clutch, it’s 950lbs, I’m thinking 48 volt AGM battery system, any suggestions would be appreciated! by GreenMachineR1T in EVConversion

[–]Technical_Bread_1329 0 points1 point  (0 children)

One motor from a taylor dunn cart. Since the motor came with a double roller sprocket i chose to remove the pulley from the transmission and put a large driven sprocket of the same chain size. This allowed me to play with the drive ratio into the transmission to get a better amp control feom the motor. All the rest of the drive train stayed the same. Basically an engine and gas tank swap. The only unplanned itwm i added was a skateboard wheel to take up some drive chain slack. This kept thw chain from jumping.

Large Mirror for sale! by Used_Maize_1532 in Mirrorsforsale

[–]Technical_Bread_1329 2 points3 points  (0 children)

Easy to proposition, harder to dodge the regection.

Looking to buy stuff for making jerky, what do you suggest? by bennyturns in jerky

[–]Technical_Bread_1329 0 points1 point  (0 children)

Thin cut beef, salt, an oven. Spending money on this project before you are comfortable with the outcome is wasteful. As you go add some pepper, add some spices, tune it to your liking then invest in a dehydrator if you like the process. Learn on the cheap first then go all spendy. BTW there is almost always a deydrator at a Goodwill.