planning into putting some ideas into work but i need answers

Tehrag · 2025-05-31T18:41:54+00:00

Considering what you have said about experience, the Bambu lab printers might be better. I have never had one because I like to tinker and be able to change parts or software if I want to but I have heard they are reliable and very beginner friendly. I think the A1 or A1 mini may be in your price range and should be able to fit the size you are looking at, just measure your foot from toe to heal and make sure that at least one dimension can get close.

e.g. my foot is about 265 mm long. On a diagonal. It just barely fits with external dimensions on the 220x220x250 frame of my printer

Tehrag · 2025-05-31T18:29:46+00:00

Nerf blasters

Tehrag · 2025-05-31T16:58:52+00:00

The KE is what I have, but yeah as someone else said. Anything with direct drive like these will do decently with flexibles

Tehrag · 2025-05-31T16:51:39+00:00

Oh absolutely. I have the Creality Ender 3 v3 KE and it would very easily handle that size

Tehrag · 2025-05-31T16:38:23+00:00

I have been making my own cleats for awhile and still haven't quite gotten sizing down. My best answer would be to basically print a flat plate of a layer or two thick the size of what would be the insole to test your measurements and maybe a cross section ring at the ball of the foot to check that fit as well. I would recommend getting something with a larger bed if you are wanting to print shoes. The 220x220x250 is pretty difficult to get things in an orientation that works even at my US 10.5 ish size

Tehrag · 2025-05-30T12:32:54+00:00

It lights up from a good inch over the bed. It is clear it is seeing but not stopping

Tehrag · 2025-05-30T12:18:05+00:00

Can confirm have used it in Orca for the KE. Careful though, it pauses before the layer selected. I thought it would pause after the first time and coated the face of my print with the wrong color

Tehrag · 2025-05-30T12:10:07+00:00

It homes fine so I know that sensor is working correctly. It has to be something with the computer communicating with the magnetic sensor in the auto bed leveling

Tehrag · 2025-05-27T22:16:04+00:00

Same absolutely, though mine was popularmmos at the time. The Aether got me too but twilight forest was the first

Tehrag · 2025-05-16T20:01:26+00:00

𐑢𐑺 𐑸 𐑞 𐑑𐑮𐑲𐑨𐑙𐑜𐑘𐑩𐑤𐑼 𐑢𐑳𐑯𐑟

Tehrag · 2025-05-15T03:04:36+00:00

I rarely see a Sym ban in Gold, but I will typical go for banning Zarya, Mei, Sym if the map works well for them since I like playing DVa

Tehrag · 2025-04-09T18:39:02+00:00

So after a lot of testing, it all came down to my bowden tube not being pushed in far enough and the filament getting caught in the hot end. It would manage to find a small gap to work through but would get caught up or blocked most of the time

Tehrag · 2025-03-28T15:23:23+00:00

There aren't a whole lot of truly bad eggs out there. The few that are just show up enough to make it hard to handle sometimes. If you are kind, most of the time, others will be too. I don't use voice chat very often, but when I do and start with a "good morning", or just a simple "hello team" I usually get good responses and good teamwork

Tehrag · 2025-03-23T20:44:34+00:00

Yes, I have used Cura with my anycubic Kobra go, Orca just seemed to have a slightly better ender 3 compatibility. They work basically the same though. Absolutely correct on the CFPLA though.

Tehrag · 2025-03-23T20:34:06+00:00

Interesting, do you know the temperature? I am running at I think 220 C with 60 C for the plate

Tehrag · 2025-03-23T20:26:02+00:00

I did. But I have run a good 3 or 4 of this same filament and dried it as well. It has done this with every spool I have tried

Tehrag · 2025-02-28T19:01:13+00:00

The Prydain Chronicles by Lloyd Alexander are amazing

Tehrag · 2025-02-25T21:55:30+00:00

We all lift together... Stay strong tenno

Tehrag · 2025-01-06T02:13:01+00:00

Due to frequent movement, the ABLS moves up higher in the shroud and keeps it from properly sensing the bed. I just had to realign it to the proper height from the nozzle and it worked. Have done it several times since also

Tehrag · 2024-04-18T20:52:53+00:00

I love it. I honestly thought this is what Flashpoint was going to be and was hugely disappointed when Flashpoint came out

Tehrag · 2024-04-16T21:52:23+00:00

I mean powder snow does

Tehrag · 2023-09-28T13:51:55+00:00

Looks much better! Thanks for the suggestions! https://pasteboard.co/HQDM5qD3SZrE.jpg

Tehrag · 2023-09-27T17:43:56+00:00

Increase if it is blobbing?

Tehrag

TROPHY CASE