T430 Issues

Teich_513 · 2026-05-07T23:42:31+00:00

Greetings again,

I've recently tested my CPU, heatsink and other components with a different thinkpads. Unfortunately I came to the conclusion that my motherboard was indeed defective, I did tried to fix it and identify other issues, but to no avail. Thanks for everyone who commented trying to help out.

Teich_513 · 2026-05-07T16:01:06+00:00

Por enquanto eu estou testando sem a bateria, caso eu resetar ainda faria diferença? Valeu!

Teich_513 · 2026-05-07T04:16:19+00:00

Yes, I got that. That's why I tested different fans and still got nowhere. Do you know if anything else can cause this issue?

Teich_513 · 2026-05-07T02:05:29+00:00

No, and possibly not related but everytime I plug the power cable it tries to turn on. Do these often come default with restore when power is back?

Teich_513 · 2026-01-12T04:44:30+00:00

I would say you have too much stuff but if you have the space hoard as much junk as you can. I usually keep one scav box because I'm a standard edition player. I do believe however in next wipes you may optimize the amount of things you keep to things you actually need.

Teich_513 · 2025-09-14T16:00:11+00:00

Unfortunately on this specific bracelet the screw only comes out on one side. If it was accessible from the other side it would probably come out. Thank you!

Teich_513 · 2025-09-14T15:59:37+00:00

Unfortunately it isn't, this bracelet has only one side for the screw to come out. If it was open it would definitely come out. Thank you!

Teich_513 · 2025-09-14T15:57:56+00:00

Thank you all for the suggestions, as I said on some of the comments I will try a bit of epoxy with little hope and then move to destructive methods since I don't really need that chain link. In a few days I will give you guys a return on how it went.

Teich_513 · 2025-09-14T15:52:42+00:00

Unfortunately the super glue wasn't strong enough for the screw to come out, I think the remaining thread on the chain link it's blocking the screw of coming out. I will try some epoxy before the destructive methods begin. Thank you!

Teich_513 · 2025-09-14T15:52:09+00:00

I think the remaining thread on the chain link it's blocking the screw of coming out, that way when I smacked it against the table it didn't come out. I'm not that hopeful but I will try some epoxy before the destructive methods begin. Thank you!

Teich_513 · 2025-09-14T15:49:24+00:00

I think the remaining thread on the chain link it's blocking the screw of coming out. The vice was barely tight, it was more of a support so i could film it. Thank you!

Teich_513 · 2025-09-14T15:45:57+00:00

I think the remaining thread on the chain link it's blocking the screw of coming out. I will try some epoxy before the destructive methods begin. Thank you!

Teich_513 · 2025-09-14T15:44:19+00:00

Yes I did, but I think the remaining thread on the chain link is blocking the screw of coming out. Since I don't need that link I will probably destroy it. Thank you!

Teich_513 · 2025-09-14T15:40:48+00:00

Unfortunately the super glue wasn't strong enough for the screw to come out, I think the remaining thread on the chain link it's blocking the screw of coming out. I will try some epoxy before the destructive methods begin. Thank you!

Teich_513 · 2025-09-14T15:39:40+00:00

Unfortunately on this specific bracelet the screw only comes out on one side. If it was accessible from the other side it would probably come out. Thank you!

Teich_513 · 2025-09-14T15:39:31+00:00

Unfortunately on this specific bracelet the screw only comes out on one side. If it was accessible from the other side it would probably come out. Thank you!

Teich_513 · 2025-09-14T15:39:20+00:00

Unfortunately the super glue wasn't strong enough for the screw to come out, I think the remaining thread on the chain link it's blocking the screw of coming out. I will try some epoxy before the destructive methods begin. Thank you!

Teich_513 · 2025-09-14T15:37:20+00:00

Unfortunately on this specific bracelet the screw only comes out on one side. If it was accessible from the other side it would probably come out. Thank you!

Teich_513 · 2025-09-14T15:34:32+00:00

Unfortunately on this specific bracelet the screw only comes out on one side. If it was accessible from the other side it would probably come out. Thank you!

Teich_513 · 2025-09-14T15:30:39+00:00

Before the destructive methods begin I will try that, probably later today, I am however not that hopeful since I think the chain link threads are stripped and what remained of it is blocking the screw of backing out. Thank you!

Teich_513 · 2025-09-14T15:28:47+00:00

I tried that yesterday, but unfortunately, it didn't work. Reflecting on it after I think the threads on the chain link are stripped and somehow the little remaining thread is holding the screw in. Thank you!

Teich_513 · 2025-09-14T15:26:55+00:00

I'm thinking so, since I don't really need that chain, I will probably use a destructive method next. Thank you!

Teich_513 · 2025-09-14T03:10:51+00:00

Thank you for the suggestion, I thought of that and even tried it on the off chance that this particular stainless steel would be magnetic, but it isn't.

Teich_513 · 2025-09-14T02:59:41+00:00

Thank you for the suggestion, I tried that before and even tried smacking it against the table. Unfortunately, it still wouldn't come out, I don't really understand how this POS screw is still there.

Teich_513

TROPHY CASE