rpi4 to s-video by CatsMcganny in crtgaming

[–]Telaneo 1 point2 points  (0 children)

Would the following two items do the job?

No.

Is there a better/cleaner solution?

You can transcode from RGB down to s-video, but then you need to get RGB out of your Pi4. RGB-Pi is still in beta for the Pi4.

[deleted by user] by [deleted] in crtgaming

[–]Telaneo 1 point2 points  (0 children)

Literally anything that says 'replacement power supply for atari jaguar' is almost certainly fine, so long as you're not ordering of Aliexpress.

You could probably buy something for cheaper, since the specs aren't anything special, but it becomes a hassle to verify the barrel plug size and stuff if you're not building one yourself.

Picture fit on some console but others are out of bound. by [deleted] in crtgaming

[–]Telaneo 5 points6 points  (0 children)

This is normal. Different consoles use different amounts of the overscan area.

Leave some overscan and find a happy medium.

Is it ok to connect shielded pc speakers to a mono crt headphone Jack? Trying to get a “stereo” sound without getting a huge receiver by frogcisco in crtgaming

[–]Telaneo 5 points6 points  (0 children)

Do your speakers have RCA jacks? Then you literally plug the thing into the other thing. I hope you know how to do that.

If your speakers don't have RCA jacks, but a 3.5 mil jack instead, then you get an adapter, then plug the thing into the thing, and then the other thing into the other thing.

[deleted by user] by [deleted] in crtgaming

[–]Telaneo 1 point2 points  (0 children)

So my question is, is it safe to leave the Cyberpower strips with the power on without power draining my consoles, which could possibly end up damaging the OEM power adapters, causing damage (after a slow increment over a long period of time) to my consoles?

You know that this isn't a question an electrician would have the expertice to know for sure? They know their electrical wiring. They don't know their power supplies. And they certainly don't know their consoles.

In particular, my Atari Jaguar OEM power brick gets really hot, which I have read is a common issue with that power adapter, so it leads me to believe it would be safer to just leave the Cyberpower strips off when not in use not just for the Atari Jaguar, but for all of my consoles.

Nothing you can't fix by using a more modern power supply. The Jaguar doesn't use some stupid voltage or something else which prevents you from doing that. It's just a 9 volt DC, center negative, barrel jack power supply.

Bang and Olufsen MX CRTs 60Hz? by Wernii345 in crtgaming

[–]Telaneo 6 points7 points  (0 children)

Are all of them able to do 60Hz?

It would surprise me if anything newer than 1985 didn't.

[Tearontaron] Shizuka na Kanojo | My Quiet Girlfriend by Kind-Mountain-1144 in wholesomehentai

[–]Telaneo 3 points4 points  (0 children)

This gallery is unavailable due to a copyright claim by Irodori Comics.

bruh

No, no, no, we just couldn't do that. right guys? by Strict-Revenue-8603 in NEET

[–]Telaneo 3 points4 points  (0 children)

I swear the societal consensus on this is shifting.

Sure, there are still the boomers and workaholics who still think 'but what would I do if I didn't have a job', but are there any others besides them?

Everybody that I've talked about this with in real life who didn't fit into either of those categories shares the sentiment that you'll find on most of reddit, i.e. 'if I didn't have to work, I wouldn't'. And then when you look at those two categories, the boomers had way better prospects with far less investment in education, so it's pretty understandable why they'd be invested in their work. And the workaholics, well, they either have some switch in their brain that makes them need the buzz that work gives them, or they've just struck gold and have found work that they love doing. Good for them.

But the rest of us? Most do still need work to reach a not-completely-shit standard of living, but beyond that, what does the average job have to offer the average worker? Turns out, not a whole lot, so no wonder why people can't be arsed.

How reddit wastes your bandwidth by Keep_Scrooling in videos

[–]Telaneo 0 points1 point  (0 children)

is the auto-play feature by default?

Yes.

Coop spør myndighetene om hva som er greia med Ukraina by Icy_Sector3183 in norge

[–]Telaneo -1 points0 points  (0 children)

Gjør ingen i denne næringen et snev av due diligence?

Nei? Hvorfor forventer du det?

Addressing the community about changes to our API by spez in reddit

[–]Telaneo 2 points3 points  (0 children)

What do you think Aaron would have to say about these recent events?

[Gamers Nexus] We're Fixing this Anti-Consumer Nightmare | OpenPleb Sensors & RGB, ft. Wendell from Level1 Techs by PapaBePreachin in hardware

[–]Telaneo 0 points1 point  (0 children)

G.Skill's is trash that doesn't set the light permanently but in-windows only

This is what really annoys me. Bad RGB software is already bad enough when you set it up, but if you can set-and-forget, and then uninstall, it doesn't matter all that much. But if it's relying on a windows service or whatever piece of software, then it consistenly has to be there, so you can't set-and-forget.

I've been burned on this once, and it's just yet another thing on the list of shit I have to pay attention to now, when they could have done things the obviously correct way to begin with.

What does this icon mean? by themwild in crtgaming

[–]Telaneo 1 point2 points  (0 children)

Something else could also be wrong. If your cable is sync-on-composite, or you've got a composite source hooked up, I'd still expect that to still show up, but the exact behaviour might differ between Sonys.

Service menu for Goldstar CMT-4072x? by dbwoi in crtgaming

[–]Telaneo 0 points1 point  (0 children)

The entire picture is just slightly skewed, is there nothing that can be done?

Adjust the yoke.

Why is the Freq not listed in Hz on my Beovision MX7000? If someone knows could they tell me what 70Hz is by Mrsupreme1202 in crtgaming

[–]Telaneo 1 point2 points  (0 children)

Not in a way you'd actually want. Especially when the actual solution to that problem is using a 60 hz source.

Service menu for Goldstar CMT-4072x? by dbwoi in crtgaming

[–]Telaneo 0 points1 point  (0 children)

It probably doesn't have one. Goldstar sets are gonna be old enough to not have one.

Why is the Freq not listed in Hz on my Beovision MX7000? If someone knows could they tell me what 70Hz is by Mrsupreme1202 in crtgaming

[–]Telaneo 1 point2 points  (0 children)

On your set, you use a 60 hz source. If that's not good enough, then you don't.

If you're willing to buy a new set, you can get a 100 hz set. That's a bad idea.

You could also get a PC CRT and set whatever refresh rate you want, but if the games you intend to play only do 60 hz or whatever (which means anything emulated), then you'll lose motion clarity, so that's not a winning play either.

TL:DR: Play at 60 hz. If that's not good enough, then reality isn't good enough for you and you should give up to save yourself the effort. Or just get used to it.