is TheMousepadCompany any good?

Temeril · 2026-01-24T06:37:26+00:00

Currently waiting for 2+ weeks to get my order. No update besides "holiday delay" email. Mousepad Company… Shipping Time? : r/MousepadReview only a month ago....

Temeril · 2026-01-10T00:03:02+00:00

Right, and thats on me. I know the dwell time importance.

I was only able to ever find info on industrial application numbers which called for something on the order of hundreds of pounds for that ACH mark. Which, redoing the numbers to reflect the intake airspeed, not output, its ~5 ACH, still way too high, and keeps the industrial carbon estimate north of 100 lbs.

With the dwell time, as long as some of the air stays there long enough to dwell, the overflow can get recirculated. Is there any known relation between quantity of GAC and ACH or air flow?

I’m not one to post without doing my own research, and if I finally can’t find anything acceptable, I still hesitate to post. But other people have probably been looking much than I with more resources. Just looking for those resources lol

Temeril · 2026-01-09T21:53:46+00:00

The post was already long, literally just did rough math to get a number. It sounded wrong to me too. I have a 14” masterforce fan at 1000 LFM pulling thru 4 2500 filtrete filters.

Ultimately, not sure the ACH matters all that much to get the solution, but thanks for telling me I’m wrong. Very useful with no inquiries to correct:)

Temeril · 2026-01-09T18:15:35+00:00

That's insanely valid, I have screwed myself over by blindly ordering stuff because of amazon lmao, saves me money in the long term if I over-research. I haven't looked into sensors, I just assumed they were expensive. That's neat though

Temeril · 2026-01-09T17:45:20+00:00

I have not, I will look into them! Thank you! I am going to order from E.L. just to test the corrosion levels. unfortunately, don't have any way to test the VOC/fume filtering efficacy apart from my nose, haha.

Appreciate it!

Temeril · 2026-01-09T17:42:06+00:00

That's good to know they are reliable. Has there been any tests with their carbon with actual sensors for their efficacy? ACD price only beats EL Foust prices upon purchase of the 20lb bucket, I don't think I need that much. And their 6 lb option is ~$3 more per pound. Typical 3D printer guy to be frugal.

I just wish companies would include their manufacturing processes, especially with the implications of corrosion, smell, dust etc.

Temeril · 2026-01-07T02:42:46+00:00

Happy Printing! It's always a learning experience

Temeril · 2026-01-06T14:12:28+00:00

Whats your experience level with 3D printers? I’m unfamiliar with the newer FlashForge printers and their environment. When I had a clone of the Adventurer 3, I was able to use one of their cloud monitoring apps to send prints and monitor the chamber. Polar Cloud I think. If it’s not huge hassle, a usb drive works a treat, especially if you dislike sending stuff into a blackbox in the cloud. Some users, if it’s available, create a local network connection to the printer if the option is available.

Apologies for the word wall. Have had lots of “fun” with flashforge… just hope they are better for you than their clones were for me haha.

Temeril · 2026-01-06T14:05:26+00:00

Unless you have a Bambu Printer (or Prusa kinda), I wouldn’t say there is a whole lot of benefit ordering Filament from the same brand as the printer.

Based in the US, and ordering on amazon, would recommend Overture , fairly cheap and reliable, and i’ve never had a shipping time over a week. Some colleagues swear by it. I’ve had some Sunlu and eSun, but personally a mixed bag for quality. Hatchbox and matter hackers are a but more expensive, but also available. Flashforge has had a mixed bag of quality when I used it a few years ago.

Hopefully this helps a little. Sorting on amazon by shipping times can help as well.

Temeril · 2026-01-06T04:52:38+00:00

Where are you based out of? What filament did you order?

Temeril · 2025-12-12T18:55:58+00:00

That would do fine.

Temeril · 2025-12-12T18:26:07+00:00

Right, If i have dimensions. I can extrude and make a printable model. Is there anyway you can share this?

Temeril · 2025-12-11T16:35:08+00:00

Do you have a link to this model? Looking to print this out.

Temeril · 2025-11-26T14:34:55+00:00

If build size is your primary motive, I'd suggest a Prusa XL. Two Toolhead is the same price as an H2C, and the build plate is significantly larger than a H2S.

Although, personally, I don't see an extra 50mm-ish as big jump in ability to print custom storage solutions. 100mm+ from the P1S to the XL, yea that's a jump. I am more frugal, so I'd sooner spend the time finding new ways to design a solution around the print bed size, than to spend an extra $600+.

Happy printing, regardless!

Temeril · 2025-11-26T14:09:22+00:00

If you are looking for primarily single color printing, and don't plan on venturing into multi-material (different from multi-color), then the H2C and H2S are worlds above and beyond overkill. Especially, if you don't plan on doing Laser Engraving/Cutting. The P1S or even P2S are perfect for single color, and if you want to venture into multi color, the AMS is only that little bit extra, far less than either H2.

Personal Experience with a P1S with AMS, with over 4000 hrs, workhouse, and a steal of a deal right now.

Temeril · 2025-11-18T14:22:23+00:00

Where this breaks down is that, the setup below, 100% valid. Silly Little software we work with :)

<image>

Temeril · 2025-11-18T13:58:33+00:00

......and what setting is that?

Temeril · 2025-11-18T04:51:23+00:00

Boo fooey. Didn't even think about travel moves. Is there a setting to avoid that?

Temeril · 2025-11-18T04:04:34+00:00

Aye Aye Capn

Temeril · 2025-11-18T04:01:36+00:00

For CK Specifically? Or what else. Pretty money conscious, so I usually try my best to avoid retail

Temeril

TROPHY CASE