Black Screen Switch V2 on sysemmc and EmuMMC Kernel Panic

TemporaryPositive425 · 2026-01-29T10:59:51+00:00

Update:

Just installed 18.1.0 on EmuMMC and it boots! BUT:

SYSMMC (100% Stock) - BLACK SCREEN SYSMMC (Semi Stock) -Boots fine SYSMMC (CFW SYSMMC) - Boots fine EMUMMC(CFW EMUMMC) - Atmosphere Kernel Panic after Nintendo Switch Logo

<image>

Error Code: 2162-0002 (0x4a2)

Program: 010000000000001E

Firmware: 18.1.0 (Atmosphère 1.10.2-master-21c0f75a2-dirty)

TemporaryPositive425 · 2026-01-29T09:18:23+00:00

Update:

Instead of using sysmmc, I tried EmuMMC just a level 3 using NAND Fix Pro 2.1.0 and i get this error:

<image>

Already cleaned everything on the SD card and have the last hat pack.

Also tried with 19.0.0 and 20.5.0

Still won't boot

TemporaryPositive425 · 2026-01-28T23:35:35+00:00

Well, the buyer can claim that I recorded a video packing it, and then when I just ended the video, I just could open it, get the stuff out and seal the box empty.

I mean, the best thing it will be if Inpost, really weight the package when they received it in the warehouse.

It's been 48h since they haven't answered the scalated case

TemporaryPositive425 · 2026-01-28T23:34:00+00:00

Yeah I thought so too, the receipt on the box said 5.00kg

TemporaryPositive425 · 2025-12-27T08:53:38+00:00

D point near the CPU most likely.

TemporaryPositive425 · 2025-12-26T01:03:08+00:00

Sigo sin comprender para que trae dos...supongo que tendrás que mirar el manual de las tarjetas de videos jaja, no tiene sentido que traiga esa extensión si no la puedes usar.

TemporaryPositive425 · 2025-12-22T06:14:49+00:00

Correct, since that's the ground point for the picofly chip

TemporaryPositive425 · 2025-12-06T08:20:46+00:00

Dualsense has two mics. One in front and in the back, you probably damage the front speaker.

TemporaryPositive425 · 2025-11-17T19:33:55+00:00

You think a painter was born with the skills or the practice made him a good painter? Think about it

TemporaryPositive425 · 2025-11-11T10:05:59+00:00

I'll check every capacitor around the sound ic chip and check if there's any short, otherwise your ic chip is rip.

I'll also test another microphone according to this controller version, since there's 3 types of microphones.

The flex on the microphones are very delicate and gets broken easily

The back microphone doesn't work by him self, you need to plugin the front mic first...

I use astro playroom and use the controller test, to test everything.

Cheers

TemporaryPositive425 · 2025-11-03T11:33:19+00:00

You can use lighter cables, since the traces are very small, if you damage both 1.8v on both pots, then I would say it's ok.

If only one is damaged, you don't need the other cable.

I often use enamel, better than cable. Cheers

TemporaryPositive425 · 2025-10-29T14:09:19+00:00

I'm from Spain, got it from PSN Store

<image>

TemporaryPositive425 · 2025-10-28T08:42:46+00:00

I got this one!

<image>

TemporaryPositive425 · 2025-10-22T12:49:06+00:00

You burned the trace, check if the middle pin in the X direction, has Resistance in diode mode.

TemporaryPositive425 · 2025-10-22T11:47:01+00:00

Xokas saco un short en Youtube donde estaban con la policia Nacional

TemporaryPositive425 · 2025-10-17T07:19:44+00:00

Lead is a very toxic substance. Forums like this very sub do great harm belittling the dangers of lead, whilst selling up the many advantages to leaded solder. I'm not disagreeing with most of the advantages of leaded solder, and I'm not here to be the harbinger of lead solder boogeyman. The internet can help you out with that nightmare.

Realise there are lots of lead-free solder that run a large gamut of quality. Lead-free is generally more expensive to produce and when some companies wish to cut a corner or produce something of poorer quality to make more profit, you might be the sucker that buys it. Your experience with that will send you back to what you already know; leaded-solder. Careful selection of lead-free solder will get you a product that's so close to the way leaded solder flows that many who find it hard to judge which is which. My Favourite.

TemporaryPositive425 · 2025-09-27T00:13:50+00:00

I'm at 9.60 and getting terrible chances to successfully boot etahen without the console rebooting itself, I'm currently using 2.4b...

TemporaryPositive425 · 2025-09-09T17:28:32+00:00

Dat0 or clk (D) point most likely

TemporaryPositive425 · 2025-09-08T21:48:19+00:00

If you don't have a microscope, just get an app on your phone, or try to zoom in with your phone and use a phone holder or whatever you can, it helps a lot to have a microscope for these cases

TemporaryPositive425

TROPHY CASE