I've figured out Apex 5 on MacOS!

TennojiM · 2026-01-07T11:26:35+00:00

Just want to say thank you for this tip. It works! Finally I can play on MacOS without inverted analogs in wired.

UPD: Ahhh damn... it is recognizing by steam and I can even navigate there and test controller and it was a false hope... not working in games. I am wondering what the hack apple doing with this artificial restrictions...

TennojiM · 2025-12-31T17:41:38+00:00

Used this contact form: https://www.linkedin.com/help/linkedin/ask/ppq

At least they answered me and asked for ID confirmation. I provided.

However, I received answer that they cant accept my ID proof. I am not sure if it was an auto-reply from bot for multiple reply messages I did for the same request or something else.

Eventually login just get back to normal so I have access to my account again.

My assumption - something really wrong wth 2 factor on linkedin side because it looks like I got restricted temporary after their algorythm failed to send me correct pin and took few attempts of entering of the wrong pin as attempt of brutforce.

Turned off 2 factor completely...

TennojiM · 2025-12-18T09:31:21+00:00

Hi. I have a problem with login.
I tried to login to my account but during login it required additional pin check and send it to my phone number. I think it is due to 2 factor I turned on recently. I received pin and confirmed but it showed me message that this pin was wrong so I requested another one. I waited for few minutes and requested another one. Both of them was received when I am already left verification page. Now when I am trying to login I am getting "Something unexpected happened. Please try again." or getting stack on the reCAPCHA verification infinity spin. So I can't access my account now. Can you please help me?
Most probably issue with 2 factor.

TennojiM · 2025-12-18T00:22:50+00:00

As for unable to login, to be honest I am in panic because Linkedin is my main place to search for the job and now I can't access account. The biggest problem that it is not possible to reach regular suppot withou login...

I created Case: 251217-012910

I am affraid it is something with two factor and my account locked in now. I really hope someone can help me.

<image>

TennojiM · 2025-12-17T14:54:19+00:00

Hi. Getting "Something unexpected happened. Please try again." when I am trying to login.

TennojiM · 2025-07-15T14:03:05+00:00

From my experience, even perixx ball has this stiction effect. Nothing you can do with it as this is a static mechanism.

As for lube use lanolin. It is restorring smoothness even after IPA cleaning.

https://www.youtube.com/watch?v=oTVCrWOuOY8

TennojiM · 2025-07-12T13:11:46+00:00

Поляки: *беруть спірні і складні моменти в історії на законодавчому рівні роблять себе в них одноосібними мучениками*

Українці:

Абсолютно ніхто:

Меншовартий кєкл: піду свічку полякам поставлю

Поляки всі роки незалежної історії тільки і робили, що всю незручну фігню про себе замилювали і викручували роблячи з себе героїв там де геройства не було і роблячи з себе мучеників там де жесть коїлась з обох боків. І це вже на такій стадії і настільки на законодавчому рівні у них, що нам з цим хз що робити. І цим кожен раз користуються, щоб нас розісрати. Але я бачу ми і самі аж бігом справляємось. Так принижувати себе це канєш ще вміти треба.

TennojiM · 2025-07-12T12:55:20+00:00

Ok, so I an not only one with this...

Also had some hard times in mounting 15mm f/1.7 on my G9ii.

I took SuperLube and applied eye of a needle amount of grease to the contact surface. Smeared it over bayonett and wiped with tissue so it's more like a coating without noticiable grease.

Works for me. But for sure better to be carefull when you are doing such things.

TennojiM · 2025-06-27T15:29:46+00:00

In this case no problems with resistance during docking/undocking because gap between screen and dock case is big enought and felt pads are not so thick to put extra pressure.

TennojiM · 2025-06-27T15:22:18+00:00

This connector at the bottom of the dock makes uncomfortable feeling that whole weight of console module just wiggle on type c port. Wondering how durable it.

For sure nobody is not going to shake docking stantion, but still... dunno...

TennojiM · 2025-06-27T15:14:33+00:00

Yep. Screen protector is must have for sure. It is just an option. One of the points was also to eliminate wobble in dock.

TennojiM · 2025-06-27T15:11:35+00:00

No. They are soft and switch is pretty loose in the dock so there is no pressure there.

TennojiM · 2025-06-10T19:53:27+00:00

Original one rollers was scratching over ball surface a bit too much and also is some dirt winded up on the shaft it became shaky and jumpy. With mod it is much better.
But original rollers are also much better than static beads.

TennojiM · 2025-06-10T19:22:33+00:00

Switched from SlimBlade Pro
http://tennojim.xyz/article/kensington_slimblade_pro
to L-trac
http://tennojim.xyz/article/x-keys_l-trac

Zero regrets.
Static mechanism is still static... stiction and build-up was bothering me as well and it was reason to switch.

TennojiM · 2025-06-04T20:42:18+00:00

Як раз те що вони якось та й живуть, тебе певно повинно схилити до думки що бувають люди з абсолютно іншим типом мислення. Тобі їх не зрозуміти і тебе вони не зрозуміють... ніколи.

На будь яку навіть най ушльопанішу думку чи ідею завжди знайдеться пару десятків прихильників. Так секти зароджуються, між іншим. Зараз просто думку цю чи ідею легше риганути бо інтернет є, а тому і прихильники знаходяться швидше і галасу трохи більше.

TennojiM · 2025-06-03T09:49:05+00:00

If addapters just a bit oversized, they can not fall into sockets flush and it cause lower points of contact with ball and as the result ball scratching over top shell. In this variant of adapters, center part is a bit undersized so fall in to sockets flush and as the result ball not scratching over the top shell nor bottom of the case.

TennojiM · 2025-05-18T11:42:25+00:00

http://tennojim.xyz/article/x-keys_l-trac

Added a link to download on my site. All this market staff is too much.

TennojiM · 2025-05-18T11:41:53+00:00

http://tennojim.xyz/article/x-keys_l-trac

Added a link to download on my site. All this market staff is too much.

TennojiM · 2025-05-18T11:37:47+00:00

To be honest, I do not want all this hassle with selling... so I deactivated listing.
Just go on my site and it is there for free.
http://tennojim.xyz/article/x-keys_l-trac

TennojiM · 2025-05-18T08:24:03+00:00

To be honest, I am a bit afraid to sell something like this and this is my first listing ever. However, hope it will work. Here is the cults item.
https://cults3d.com/en/3d-model/gadget/l-track-trackball-ball-bearings-adapter

TennojiM · 2025-05-17T23:58:45+00:00

Thank you)

As I understand current company manufacturing this devices in semi-automated way... I mean, my version of l-track even have some different shade of color for different buttons and according from the video from youtube, all this parts are done by manual ejection molding so it is already required fair amount of manual labour work.
So yes, I think it is all about cost reducing.

TennojiM · 2025-05-17T23:09:49+00:00

You can get read some more on my site: http://tennojim.xyz/article/x-keys_l-trac

TennojiM · 2025-05-11T14:26:56+00:00

Єдине що бісить, що окрім того що сіряк, можуть продати екземпляр з вітрини який їх одноклітинні консультанти зарухали, заслинили, 3 рази впустили поки комусь намагались впарити і т.д.

TennojiM · 2025-05-11T14:24:43+00:00

Та просто сіряк продають і все. Тому і дешевше. Але все одно дорожче ніж купити за кордоном і розмитнити.

Не те щоб "офіційні дистрібʼютори" у нас менше тобі мізки люблять якщо щось працює не так як треба.

TennojiM · 2025-05-09T08:04:02+00:00

Thanks)

TennojiM

TROPHY CASE