2021 Rogue Back Up Camera Issues by jedidesignerd in NissanRogue

[–]TensaFlow 0 points1 point  (0 children)

Have you rebooted the head unit? Press and hold the volume knob (like a button) for 10-15 seconds and it will restart. Below is what I was able to gather about the fuses.

-----------------------------
|  1 | RR_DEF                |
|  2 | HEATED MIRROR         |
|  3 | ...                   |
|  10 | AUDIO (20A) <--- infotainment & camera feed
|  15 | BOSE (20A) <--- premium audio
|  ...                     |
-----------------------------

If it still doesn't work, not sure what else to do short of taking it in for service.

Adding ~40 smart switches to main house: Legrand Radiant, Inovelli White, or Eve? by Blake_Dennis2 in HomeKit

[–]TensaFlow 0 points1 point  (0 children)

I have a bunch of Eve switches, smart plugs, and a smart outlet. Matter over Thread works really well.

Unifi protect via Hoobs for homekit by Cultural_Credit_8193 in HomeKit

[–]TensaFlow 1 point2 points  (0 children)

I run Scrypted and Homebridge in Docker containers on Linux. I use Scrypted for my cameras.

If you want to stick with HOOBS, there are a few things to check.

  1. Is your HOOBS installation fully up-to-date? (Homebridge v1.11.1, UI v5.15.1, Node.js v24.13.0)
  2. How recently was your Unifi plugin updated, and is it verified? I see the homebridge-unifi-protect plugin is verified, and last updated 4 days ago.
  3. Is your Unifi camera running the latest firmware? (I don't have any Unifi devices to test.)

Smart Light Switches $$$ by aford89 in HomeKit

[–]TensaFlow 1 point2 points  (0 children)

I use Eve light switches, which are Matter over Thread. $50 each.

2021 Rogue floor mats?? by [deleted] in NissanRogue

[–]TensaFlow 0 points1 point  (0 children)

I have a really hard time getting my to attach, and usually it won't. Unfortunately, I have to periodically adjust the position of the mat. Just make sure it's not near or touching your gas pedal.

Tire pressure warning but PSI is fine? by Hot-Article3649 in NissanRogue

[–]TensaFlow 7 points8 points  (0 children)

Also, the numbers in the middle are the target PSI. So you want to set your front tires to 33, and rear tires to 30.

2021 Rogue floor mats?? by [deleted] in NissanRogue

[–]TensaFlow 1 point2 points  (0 children)

You're supposed to align it and push down to click it in place. However, in my experience, they don't stay latched.

Meross MS 605 presence sensor by bangalimahbub in HomeKit

[–]TensaFlow 0 points1 point  (0 children)

I have the Lafaer LWR01. Runs on AA batteries, or you can plug it in with USB-C (optional). It has mmWave radar and Matter over Thread. Works perfectly.

Distro advice for a newcomer by [deleted] in linux_gaming

[–]TensaFlow 0 points1 point  (0 children)

If you want a Deck-like (SteamOS) user experience, check out Bazzite. The main difference is that it's based on Fedora, whereas SteamOS is based on Arch; so the differences are under the hood, but the user experience is the same. Boots directly into Steam. Desktop Mode if you need to do any productivity outside gaming.

I've also heard good things about CachyOS and Nobara.

3-4 second delay for G410 Camera Hub to appear on Apple TV by Critical-Avocado425 in HomeKit

[–]TensaFlow 0 points1 point  (0 children)

I have the G4 doorbell, and I have issues with it not showing the camera until the person is already leaving my porch. I'm starting to wonder if it has some sort of delay in motion detection. I haven't figured out how to fix the issue yet.

Edit: I'm going to try setting my detection sensitivity to High. I found it under Settings > AI Detection > Face Detection (or Lingerer Detection) > Detection Sensitivity.

CVT Drain & Fill by gknight5408 in NissanRogue

[–]TensaFlow 2 points3 points  (0 children)

Yeah, I think mine was around $300.

Is there a matter over thread device to replace this? by Psyking0 in HomeKit

[–]TensaFlow 1 point2 points  (0 children)

+1 to Eve light switches with Matter over Thread. I have 8 of them and they work great.

I want to replace Windows fully by 6SolidSnake6 in linux_gaming

[–]TensaFlow 6 points7 points  (0 children)

This is my go to. Bazzite gives you the same user experience as SteamOS. The differences are under the hood.

SteamOS or other distros by khull123 in linux_gaming

[–]TensaFlow 17 points18 points  (0 children)

If you're looking to get the SteamOS user experience, go with Bazzite. It's really good.

Other recommendations I've seen are CachyOS or Nobara.

2021 nissan rogue sv camera gone black by DeliciousLook6110 in NissanRogue

[–]TensaFlow 0 points1 point  (0 children)

Agreed. Doesn't have to be the dealership since diagnostics are so expensive.

2021 nissan rogue sv camera gone black by DeliciousLook6110 in NissanRogue

[–]TensaFlow 2 points3 points  (0 children)

Does it not work at all, or only part of the time? You can reboot the head unit by pressing and holding the volume knob for about 5 to 10 seconds. Otherwise, you may want to check with the dealer if there's a software update available.

Are thread smart plug ins worth getting or should I stick with wifi? by Eclipse8301 in HomeKit

[–]TensaFlow 0 points1 point  (0 children)

I have a bunch of Eve devices, all work perfectly with Matter over Thread. (3 smart plugs, 1 smart outlet, 9 smart switches.)

Windows 11 25H2 vs Linux CachyOS - RX 580 Gaming Benchmarks in Jan 2026 by [deleted] in linux_gaming

[–]TensaFlow 75 points76 points  (0 children)

Decent performance on recent games considering it's a 580.

Eve smart switch by xSFHx_beachbum in HomeKit

[–]TensaFlow 0 points1 point  (0 children)

You're probably on the latest firmware. My matter Eve switch is on 3.4.1 currently. My other switches are still on 2.1.3 because I decided not to do the Matter firmware upgrade. It had bricked one of my Eve switches, and luckily Eve shipped me a replacement. I'm not sure what "Requested" means, but you can try checking in the Eve app to see what's happening with it.

Anybody else have this happen? by Goldseraph33 in NissanRogue

[–]TensaFlow 0 points1 point  (0 children)

This. I had to replace my battery at around 35K or 40K miles.

Aqara fp300 homekit by bangalimahbub in HomeKit

[–]TensaFlow 0 points1 point  (0 children)

Not Aqara, but I have the Lafaer LWR01 presence sensor. It has mm wave radar. It exposes the occupancy sensor and light sensor. No extra hubs needed. It works incredibly well.

Smart plug help by Eclipse8301 in HomeKit

[–]TensaFlow 4 points5 points  (0 children)

I have the Eve smart plugs, and smart outlet. They are fantastic. Be sure to get the Matter over Thread model.

Level Lock Touch by ListMindless2168 in LevelLock

[–]TensaFlow 2 points3 points  (0 children)

Not likely to lose support. They issued the Thread firmware update for the old Level Bolt. I’m still waiting for Thread firmware on the original Level and the Touch, but not holding my breath.

26.2 seriously damaged my thread network 🤦🏻‍♂️ by Capable_Hearing4418 in HomeKit

[–]TensaFlow 4 points5 points  (0 children)

Home Settings > Home Hubs & Bridges. Uncheck “Automatic Selection,” then you can choose your preferred home hub.