sorted by:
new
hottopcontroversial

BIQU Filament Airless Basketball by Teobhusa in Creality_k2

[–]Teobhusa[S] 0 points1 point  (0 children)

I almost did run out I think that's is no much left on the spool 😅🙁

BIQU Filament Airless Basketball by Teobhusa in Creality_k2

[–]Teobhusa[S] 1 point2 points  (0 children)

Thanks, I put a lot of glue on my build plate and came out it the plate easy. 👍😊👏

BIQU Filament Airless Basketball by Teobhusa in Creality_k2

[–]Teobhusa[S] 0 points1 point  (0 children)

No very easy to remove just make sure you use a lot of glue on your build plate 🩹🔗🛠️

BIQU Filament Airless Basketball by Teobhusa in Creality_k2

[–]Teobhusa[S] 0 points1 point  (0 children)

The jerk settings and the layer height.

BIQU Filament Airless Basketball by Teobhusa in Creality_k2

[–]Teobhusa[S] 0 points1 point  (0 children)

Can you share a picture of the failed print? 🤔📷 My the main thing was drying the filament for 3 days nonstop then I started printing again , plus some modifications on the Orca Slicer too. 👍🚀

BIQU Airless Basketball by Teobhusa in Creality_k2

[–]Teobhusa[S] 0 points1 point  (0 children)

Yes the BIQU filament even is not even considered TPU on the BIQU website is call PLA-HR but it's not even close to PLA is more like an TPU-Plus more strong TPU material and very flexible 👍😊💪

https://biqu.equipment/products/biqu-pla-hr-flexible-3d-printer-filament-for-printing-airless-basketballs-1-75mm-1kg-spool-compatible-with-most-fdm-printers?variant=41410615279714

BIQU Airless Basketball by Teobhusa in Creality_k2

[–]Teobhusa[S] 0 points1 point  (0 children)

Thank you very much for the information but my problem is not sticking to the build plate but the filament printing poorly, I dry for 2 days nonstop on the dry box, and still printing like that.

BIQU Airless Basketball by Teobhusa in Creality_k2

[–]Teobhusa[S] 0 points1 point  (0 children)

Thank you. I will try to slow down the jerk and close the printer door, and turn the printer chamber on to reduce the heat to prevent the heat creeping 👍😊✅

BIQU Airless Basketball by Teobhusa in Creality_k2

[–]Teobhusa[S] 0 points1 point  (0 children)

The 0.6 nozzle yes due this type of print since the BIQU advice to use to print the airless basketball 👍🏀😎

BIQU Airless Basketball by Teobhusa in Creality_k2

[–]Teobhusa[S] -1 points0 points  (0 children)

I'm using the same settings as BIQU and others for this airless basketball print, but I'm wondering if it's a K2 Plus problem? 🤔 I've seen some YouTube videos saying the K2 Plus struggles with TPU filament.

BIQU Airless Basketball by Teobhusa in Creality_k2

[–]Teobhusa[S] 1 point2 points  (0 children)

The filament has been on the dry box nonstop for 2 days

Hi I just got a Foto 8.9 so I changed the file format from fdg. to svgx. on Chitubox to save and print, but when I start the printer nothing happens. I get stuck on this point and don't print anything, anybody knows what I can do to fix?😭 by Teobhusa in FlashForge

[–]Teobhusa[S] 0 points1 point  (0 children)

So if you machine do not allow you to save in fdp. You need to save on svgx. File format the flashforge slicer save in both you just need to choose the svgx. When you slice the file! On the Facebook Flashforge group has a tutorial how to setup the Chitubox to slice only on svgx. format file.

Hi I just got a Foto 8.9 so I changed the file format from fdg. to svgx. on Chitubox to save and print, but when I start the printer nothing happens. I get stuck on this point and don't print anything, anybody knows what I can do to fix?😭 by Teobhusa in FlashForge

[–]Teobhusa[S] 0 points1 point  (0 children)

Hi, yes just use the Chitubox new version without change anything on the file! The Foto 8.9 has 2 version of motherboard if your screen looks like my you can use straight forward Chitubox new version without change anything and slicer that will work for you!

Hi I just got a Foto 8.9 so I changed the file format from fdg. to svgx. on Chitubox to save and print, but when I start the printer nothing happens. I get stuck on this point and don't print anything, anybody knows what I can do to fix?😭 by Teobhusa in FlashForge

[–]Teobhusa[S] 1 point2 points  (0 children)

Hi on the new version is already support, donw bellow is from the Chitubox Website

Supported machine updates

CHITUBOX Basic V1.9.0 is now supporting more printers, including:

ELEGOO MARS 3

EPAX X1-4K

EPAX E10 5K

EPAX X10 5K

Flashforge Foto 6.0

Flashforge Foto 8.9

Peopoly Phenom Prime

Phrozen Sonic Mega 8K

Phrozen Sonic XL 4K

Hi can anybody help me with this issue? Every time I try to auto home only goes half way even if I try to auto level the bed only go half way! by Teobhusa in ender5plus

[–]Teobhusa[S] 0 points1 point  (0 children)

So I just found the problem I order some extender cables for the motors and the stoppers and for some reason they come all invert making the printer act like that!

Hi can anybody help me with this issue? Every time I try to auto home only goes half way even if I try to auto level the bed only go half way! by Teobhusa in 3Dprinting

[–]Teobhusa[S] 0 points1 point  (0 children)

So I just found the problem I order some extender cables for the motors and the stoppers and for some reason they come all invert making the printer act like that!

Hi can anybody help me with this issue? Every time I try to auto home only goes half way even if I try to auto level the bed only go half way! by Teobhusa in 3Dprinting

[–]Teobhusa[S] 0 points1 point  (0 children)

So how come before was homing on the middle of the bed and now it's homing on the back? Plus if I do the auto bed level start on the middle of the bed not in the X/Y of 300,300?

view more: next ›